tender for Under Jal Jeevan Mission Water Supply Scheme Shelgaon Tq Washi
Tender Value
28.46 Lakhs
Estimated cost
Bid Submission
03 Sep 2022
0 days left
EMD
28462
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shelgaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Under Jal Jeevan Mission Water Supply Scheme Shelgaon Tq Washi
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK NO.1 :- DEEPENING OF PERCOLATION PWS WELL-1Item No. 1 :- Drilling of horizontal borewell including cost of all lobour fuel machinery and transportation charges etc complete. |
| 2 | Item No. 2 :- Excavation in general in hard material comp-rising of soft rock,hard roack, Manjara rock, etc. by blasting / controlled blasting, chiseling as required in wet or dry condition for head works i.e intake well. Connecting pipe . Jack well pump house supply well for lift 0.00 to 1.50 m & lead of 150m etc complete. Lift 14.50 to 15.00 M |
| 3 | Lift 15.00 to 16.50 M |
| 4 | Lift 16.50 to 17.50 M |
| 5 | Item No. 4 :- Dewatering the excavated trenches and pools of water in the building trenches/pipeline tren-ches, well works by using pumps or other devices including desposing off water to safe dist-ance as directed by engineer-in-charge. ( Including cost of machinery, Labour charges etc ) |
| 6 | Item No. 5 :-Carrying out recuperation/ yield test for asc-erting the discharge of constructed well / exca-vated profile as directed by Engineer in char-ge The test carried out by drawn down water from the well profile bellow normal sub soil water level upto full depth rise is water well profile as well as strainer suction level at pump as per design of W.S. seheme shall be recor-ded prior to the test including cost of all materials. Overhead, laborers etc. completed as directed. |
| 7 | SUBWORK NO. 2 :- DEEPENING OF PERCOLATION WELL-2Item No. 1 :- Drilling of horizontal borewell including cost of all lobour fuel machinery and transportation charges etc complete. |
| 8 | SUBWORK NO. 3 :- SWITCH ROOM 2.27 x 2.27 x 2.75 MItem No. 1 :- Excavation for foundation/ pipe trenches in earth soils of all types sand, gravel,soft murum includ-ing removing the excavated materialup to distance of 50 m & lift as below, stacking & spreading as directed, normal dewatering, preparing the bed for the found-ation & excluding back filling etc. complete.(Lift of 0.00 to 1.50 m) |
| 9 | Item No. 2 :- Excavation for foundation/ pipe trenches in Hardmurum including removing the excavated materials up to distance of 50 m & lift as below, stacking & spreading as directed, normal dewatering, prepa-ring the bed for the foundation & excluding back filling etc. complete.(Lift of 0.00 to 1.50 m) |
| 10 | Item No. 3 :- Providing and laying insitu 1:2:4 (M-150) grades of C.C. of trap/granite/ quartzite/ genies metal for foundation / bedding including dewatering form work, compacting and curing finishing etc. complete with initial lift of 1.50 cm. below/ above ground level. 1) RCC M-200For footing |
| 11 | Item No. 4 :- Providing and laying in situC.C. of trap / granite / quartzite / genies metal of R.C.C. works like raftgrillage, strip foundation and footing of R.C.C. colu-mns and steel stanchions including normal dewate-ring, from work, compaction. finishing & curing etc complete |
| 12 | Item No. 5 :- Providing and laying in situC.C. of trap / granite / quartzite / genies metal of approved quality for R.C.-C. works as per detailed drawing and desi-gns or as directed by engineer incharge including normal dewatering, from work, compac-tion, finis-hing surfaces with C.M. 1:3 of sufficient minimum thickness& curing etc. complete. R.C.C. M- 200 grade all types of columns |
| 13 | Item No. 6 :- Providing and laying in situC.C. of trap /granite/ quartzite/ genies metal of approved quality for R.C-.C. works as per detailed drawing and designs or as directed by engineer incharge including normal dewatering, from work, compaction, finishing& curing etc. complete.R.C.C. M- 200 grade beams / braces lintels. |
| 14 | Item No. 7 :- Providing and laying in situC.C. of trap/granite/ quartzite/ genies metal of approved quality for R.C-C. works as per detailed drawing and designs or as directed by engineer incharge including normal dewatering, from work, compaction, finishing& curing etc. complete. R.C.C.M- 200 grade slabs/Chajjasetc. |
| 15 | Item No. 8 :- Providing and fixing in position steel bar reinfo rce-ment of various dia for R.C.C. work detailed de sig-ns, drawings and schedules, including cutting bending, hooking the bars binding with wi-res or tack wel-ding and supporting as required etc. compelte. (including cost of binding wire)1)Tor steel |
| 16 | Item No. 9 :- Providing second class burnt brick masonry with conventional bricks in cement mortar 1:6 in found-ation & plinth of inner wall/ external wall including normal dewatering striking joints on unexposed fac-es, racking out oints on exposed faces & watering etc. compelte.In Plinth |
| 17 | Superstructare |
| 18 | Item No. 10 :- Filling in plinth & floors murum bedding in trenches with Contractor\"s murum 15 cm to 20 cm layer including water ing and compaction etc. complete. |
| 19 | Item No. 11 :- Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) |
| 20 | Item No. 12 :-Providing and fixing mild stel grill work for windows ventilatars etc 15 Kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticarrosive paint and tow coats of oil painting complete. |
| 21 | Item No. 13 :-Providing and fixing in position steel frame door of angle frame of size 50 x 50 x 6 mm. with mild stel bars 16 mm dia horizontally at 10 mm c/c for ventillator portion including iron hold fast boxes for fising shutters including welding, finishing, pointing etc comp. |
| 22 | Item No. 14 :-Providing and fixing M S grill door 24 kg /sqm of various size as per detailed drawings without hot dip coating iron fixtures and fastenings and 3 coats of oil paintingetc. |
| 23 | Item No. 15 :- Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaff old in gand curing etc.complete |
| 24 | Item No. 16 :- Providing 12/ 15 mm thick external Rouhg cast cement plaster with cement mortar 1:4 in tow coats in concrete brick or stone masonary surfaces in all positions including scaffolding & 14 days curring etc. complete. |
| 25 | Item No. 17 :- Refiling the trenches of with approved excavated meterial in 15 cm to 20 cm layere including watering and compaction etc comp |
| 26 | Item No. 18 :- Providing and laying Rough Shahabad Stone Flooring 25 mm.to 30 mm. thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. etc. complete. |
| 27 | Item No. 19 :- Providing and applying washable distemper of approved colour and shade to old/new surfaces in three coats including scaffolding preparing the surface to receive the priming coat and finishing coat etc comp.Internally |
| 28 | Item No. 20 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding it necessary, cleaning and preparing the surface watering for two daysetc comp.External |
| 29 | SUWORK NO. 4 :- PUMPING MACHINERY ForWELL - 1Item No1 : Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 65mm width, 150mm Dia thick shall be provided with each pump. 3.00 BHP |
| 30 | Item No.2 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.50 mm dia G.I. Pipe (Heavy) |
| 31 | Item No 3 :Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.50 mm dia G.I. Pipe (Heavy) |
| 32 | Item No 4 :Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984)80 mm dia Non Return Valve |
| 33 | Item No:5Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge80 mm dia CIDF pipe |
| 34 | Item No: 6 Providing & fixing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.80 mm dia Sluice Valve |
| 35 | Item No.7 :Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)80 mm dia Non Return Valve |
| 36 | 80 mm dia Sluice Valve |
| 37 | Item No.8 :Providing & fabricating of suitable size base frame for submerssible pump sets. |
| 38 | Item No.9:Supplying errecting G.I. pipes A grade errected for enclosing armoured cable 25 mm diafor underground and above ground cable with etc. complete to cover the cable all over.25 mm dia Pipe |
| 39 | Item No.10:Making trench in soft soil of suitable width & depth for laying provided L.T cable up to 10 sq.mm complete.As per specification No. CW-EXN-CTR |
| 40 | Item No.11 :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combinedmeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 41 | Item No.12 :Supplying and erecting 3 core 4 sq. mm. flat flexible submersible cable with copper conductor, PVC insulated & sheathed.3 core4 sq mm |
| 42 | Item No.13 :Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 43 | Item No.14 :EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 44 | Item No.15 :Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 45 | SUWORK NO. 5 :- PUMPING MACHINERY For MREGS WELL Item No1 : Providing, errecting and giving test of submersible Pump set confirming to I.S. 8034 and motor confirming to I.S. 9283 with water proof wiring, pump shall be suitable for various delivery head and discharge with stainless steel shaft, motor suitable for working 415V(+/-) 10%, 3 Phase, 50 Hz AC supply with cable guard, thrust carbon bearing to withstand entire hydraulic thrust. The pump shall be suitable for direct coupling with suitable suction, straining pump should have suitable discharge outlet as per manufacturers design. Stream lined non return valve shall be provided with pump, 3m submersible copper conductor cable and 2 pair of erection clamps, 65mm width, 150mm Dia thick shall be provided with each pump. 3.00 BHP |
| 46 | Item No.2 Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004.50 mm dia G.I. Pipe (Heavy) |
| 47 | Item No 3 :Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.50 mm dia G.I. Pipe (Heavy) |
| 48 | Item No 4 :Providing and Fixing ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Reflux valves as per I.S.5312 Part I (1984)80 mm dia Non Return Valve |
| 49 | Item No:5Providing and supply ISI Standard CI double fla-nged pipes including all taxes. Railway freight. Insurance unloading from railway wagon, loading into truck transpot to stores / sites, unloading etccomplete as directed by Engineer- in-charge80 mm dia CIDF pipe |
| 50 | Item No: 6 Providing & fixing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.80 mm dia Sluice Valve |
| 51 | Item No.7 :Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)80 mm dia Non Return Valve |
| 52 | 80 mm dia Sluice Valve |
| 53 | Item No.8 :Providing & fabricating of suitable size base frame for submerssible pump sets. |
| 54 | Item No.9:Supplying errecting G.I. pipes A grade errected for enclosing armoured cable 25 mm diafor underground and above ground cable with etc. complete to cover the cable all over.25 mm dia Pipe |
| 55 | Item No.10:Making trench in soft soil of suitable width & depth for laying provided L.T cable up to 10 sq.mm complete.As per specification No. CW-EXN-CTR |
| 56 | Item No.11 :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combinedmeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. |
| 57 | Item No.12 :Supplying and erecting 3 core 4 sq. mm. flat flexible submersible cable with copper conductor, PVC insulated & sheathed.3 core4 sq mm |
| 58 | Item No.13 :Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmental store, unloading stacking etc. complete. |
| 59 | Item No.14 :EARTHINGSupplying & errecting galvanised cast iron earth plate size 60 x 60 x .6 cm complete with all materials , testing as per specification No.EA-EP |
| 60 | Item No.15 :Providing and erecting pressure gauge of required capacity complete with syphon tube, isolating cock suitable for 12mm dia GI pipe. Pressure gauge shall be installed as directed, with tapping on rising main pressure gauge (100 mm dia) |
| 61 | SUWORK NO. 6 :- RISING MAIN Item No.1: Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, includingb transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm dia HDPE Pipe 6 Kg / cm2 |
| 62 | Item No.2:Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation tostores, etc. complete as per IS-1239/2004.80 mm dia G.I. Pipe Medium |
| 63 | Item No.3: Providing & supplying HDPE/GI specials ( 5 % of cost of pipe shall be considered percent of specials for estimate purpose.) |
| 64 | Item No.4: Providing, erecting, double flange sluice valveconforming forIS 2906/14846 incuding worn gear arrangements as per tes pressure stainless steel spindlle, caps including all taxes transportation etccomplete.80 mm Sluice Valve |
| 65 | Item No.5:- Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in alll respect etc complete.25 mm dia Single Ball Air Valve |
| 66 | Item No.6:Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 67 | Item No.7: Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 68 | Item No 8 : Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete |
| 69 | Item No 9 : Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) |
| 70 | Item No. 10 :-Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 71 | Item No. 11 :- Lowering, Laying and Jointing H. D. P. E./M D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulicjack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm dia HDPE Pipe 6 kg / cm2 |
| 72 | Item No.12 :- Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80 mm dia G.I. Pipe (Medium) |
| 73 | Item No.13 :- Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)80 mm dia Sluice Valve |
| 74 | Item No.14 :- Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite/ quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc complete with initial lift of 1.50m below /above ground level. |
| 75 | Item No.15 : Providing and fixing in position air valve shaft including providingand fixing GI Medium class or 6mm thick M.S, PIPE shaft 2.70m long over branch flange of air valve tee providing PCCblock of M- 150concrete 150mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged ionts wherver required and fixing of air valve over the shaft excluding cost of air vavle and branch flanged air valve tee, etc. complete as per type desihn and as per directed by Engineer - in -charge for following diameters of pipe line |
| 76 | Item No.16 :- Providing and fixing in position M.S. air valve boxes fabricated with 2 mm thick M.S. plate, 30 x 30 x 3 mm size M.S. angle frame, concreting in M-150 for fixing the box in position, applying two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by Engineer-in-charge. |
| 77 | Item No.17 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard murum material in 15cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 78 | SUWORK NO.7 :-DISTRIBUTION SYSTEM Item No.1:Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).90 mm PVC mm dia pvc 4 kg/cm2 |
| 79 | Item No.2 : Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. completeas per IS-1239/2004.80 mm dia G.I. Pipe Medium |
| 80 | Item No.3 : Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure,stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.80 mm dia CIDF Sluice valve |
| 81 | Item No. 4 :Providing and supplying PVC/C.I/G.I. Specials. |
| 82 | Item No.5 : Excavation for foundation / Pipe Trenches in earth soil of all types, sand, gravel and soft murum including removing the excavated material upto a distance of 50mtrs. And lift as below stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding back filling etc. complete. 0.0 to 1.50. |
| 83 | Item No.6 :Excavation for foundation / pipe trenches in hard murum with boulders, WBM roads including removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. complete. |
| 84 | Item No.7 :Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation, asphalt roadincluding removing the excavated material upto a distance of 50 meters beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back filling etc. |
| 85 | Item No.8 :- Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) |
| 86 | Item No. 9 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction, etc complete. (Bd-A-10/263) |
| 87 | Item No. 10 : Lowerig and laying and jointing with PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material except cement solvent, rubber ring giving satisfactory hydraullic testing as per IS Code etc complete (with cement sovlentjoint / ring fit joint working pressure 4 Kg./Sqm.)90mm dia pvc 4 kg/cm2 |
| 88 | Item No. 11:- Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.80 mm dia G.I. Pipe Medium |
| 89 | Item No. 12 :- Lowering, laying and jointing Valves and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test etc complete either underground or in vertical position as directed by Engineer-in-charge 80 mm dia CIDF Sluice valve |
| 90 | Item No. 13 :- Providing and fixing C.I. road box including loading, unloading and carting to site of workincluding all necessary excavation in all typesof strata and fixing in murum packing, etc.complete.100 x 225 mm (20kg) |
| 91 | Item No.14 :- Providing and laying in situ 1:2:4(M-150) grade of C.C. of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including dewatering from work, compacting and curing, finishing etc. complete with initial lift of 1.50m below / above ground level. |
| 92 | Item No.15 :- Refilling the trenches with available excavated stuff with soft material first over pipelines and then hard material in 15cm layers with all leads and lifts including consolidation surcharging etc complete. |
| 93 | Sub Work No 8SERVICE CONNECTION AND NAME BOARDItem no 1Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole withsuitable means , including all labour ,UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/25mm respective Dia Heavy dutyBrass/Polyprophylyne(Twin Jacketed ) Ferrule , Male and Female thread adapter Elbow, Bends,couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap,GI casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for Road crossing,including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , Closing thewater supply in that area, dewatering,hydraulic testing and restarting the water supply ,transportation of material etc.complete as directed by Engineer inA) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul) for HDPE & PVC pipe1(With Road Crossing)For 15 mm Service connection |
| 94 | B)(Without Road Crossing)For 15 mm Service connection |
| 95 | Item No. 2 :- Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 96 | SUBWORK NO. 9 :-TRIAL & RUN Item No. 1 :- Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. |
| 97 | Item No. 2 :- TCL Requirement |
| 98 | Item No. 3 :- MSEB Charges |
AI Tender Summary
Tender Timeline
Aug 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender