|
| 1 | Supplying and installing core cutter with dolly and rammer cylinder made of steel,127.3mm long and 100mm internal dia,steel dolly 25mm high ( including carriage complete Job) |
| 2 | Supply installing and commissioning unversal testing machine digital 100kn to 2000 kn (like UTM400D) including carriages complete Job |
| 3 | Supply installing and commissioning rapid moisture meter kit (including all components) carriages complete Job) |
| 4 | Suppling tempering rod (including carriage complete Job) |
| 5 | Suppling instaling and commissioning proctor compaction test equipment /appratus with hammer weighht 2.6 kg (including carriages complete Job) |
| 6 | Supplying and installing and commissioning and replacement appratus |
| 7 | Supply installing and commissioning ICD vernier vernier calliper |
| 8 | Supply intalling and commissioning graduated cylinder |
| 9 | Supplying steel almirah 6 feet tall size 34x78x18 4 shelves including carriages |
| 10 | Supplying and commissioning auto levels with stand and staff (bosh) qaulity including carriages |
| 11 | Supplying steel measuring tape 50 mtr long |
| 12 | Is Sieve sets (20cm Dia Brass frame sizes (mm/Micron) a) 10.00mm b) 4.75mm c) 2.36mm d) 2.00mm e) 1.18mm f) 1.00mm g) 600/uh) 425/ui) 300/u j) 150/u k) 90/u k) 75/u Pan & cover. |
| 13 | Is Soeve Sets (As per specifications of Is: 460) ss -GI frame Sieve set (size 30cm dia a) 125mm b) 106mm c) 90mm, d) 80mm e) 63mm f) 53mm g) 45mm h) 40mm i) 37.5mm j) 31.0mm k) 26.5mm l) 22.40mmm) 20mm n) 19mm o) 16mm p) 32.2mm q) 12.5mm r) 11.2mm s) 10.00mm t) 9.5mm u) 8.3mm v) 5.6mm w) 2.8mm x) 4.75mm y) 3.35mm z) 2.36mm |
| 14 | Standard Laboratory Use Medium Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 15 | Standard Laboratory Use Medium Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 16 | Standard Laboratory Use Fine Grade Sand: Medium sand must be supplied as per IS 650 in 25 kg bags and it must be clean and free from any organic /inorganic imourities or excess silt |
| 17 | LABORATORY CONCRETE SPECIMEN CUBE MOULDS: As per relevant is specifcations (IS 10086) : Cube Moulds for preparing concrete specifens for checking compressive strength of cement concrete of size 150mm. |
| 18 | MOTORISED SIEVE SHAKER : Equipment must consists of motorized sieve shaker for saving of ganular or bpwdered material /soils .It must accommodate up k 8 sieves of 20 cm dia .The equipment must be geated. |
| 19 | WATER BATH (REPUTTED MAKE) Water bath thermostaticously controlled or with digital controller cum indicator doubied wailed inner chamber made of non rusting satinless steel outer body of SS end |
| 20 | ELECTRIC HOT AIR OVEN (RUPUTED MAKE) : 0 Superior laboratory electric even thermostatically controlled or with Digital controller cum indicator with safety alram.It must be double walled with outer body made of MS powder coated & inner made of stainless steel |
| 21 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) 400gm -600gm capacity with read out of at least 0.01gm reproductibility of 0.01gm (Complete & Operational in all repsects |
| 22 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) \"Superior brand precision digital balance 5 Kg capbale of measuring atleast 1 gm to 5 kg with permissible error |
| 23 | PRECISION ELECTORNIC /DIGITAL BALANCE with Dual power Operation (AC/Batery ) \"Superior brand precision digital balance 5 Kg capbale of measuring atleast 5 gm 30 Kgwith permissible error (Complete and Operation in all respects) |
| 24 | PRECISION INFARED Therometer: Digital non conduct infared therometer (Fluke or superior make) with back light LCD Display battery powered with minimum operational temperature range of -20 Degree to 300 Degree for better display resolution of atleast 0.1 degree per F suitable spectular responsive class 2 - lazer power with display hold feature (Comlete and Operational in all respects) |
| 25 | PRECISION PROBE Therometer : Digital contact type probe therometer minimum operational temperature range 24 degree to 300 Degree or better display resolution of atleast 0.1 Degree F (Complete and operational in all respects) |
| 26 | AGGREGATE IMPACT TESTNG MACHINE.( As er specification of IS 9377) Standard aggregate impact testing machine for deterination of impact value for small size minerial aggregate /stocks (Equipment must be superior make manufacture and finish complete in all respect |
| 27 | ENAMEL EI-TRAYS: Sam purpose Enamel Tray /plates/Bucket of following minimum sizes Complete & Operational in all respects250mm x300mTray |
| 28 | 450mmx600 -Tray |
| 29 | FLAKENESS APPARATUS (SHAPE TEST) : As per specification SP -36 IS 2386 Part -I (Equipment must consists of following thickness guage manufactured from heavy guage steel with IS certification stamp (Equipment must be of good make and manufacture and finish complete & Operational in all respects |
| 30 | Elongation APPARTUS (SHAPE TEST) : As per specification SP -36 is 2386 Part -I ( Equipment must consists of following thrickness guage manufactured from heavy guage steel withIS certification stamp (Equipment must be of good make and manufacture and finish complete & Operational in all respects |
| 31 | STANDARD VICAT APPARTUS (Cement Testing) : Equipment must be approved for determination of consistency of standard cement paste and must be in conformation with IS : 5513- 1976 with following minimum specifications: 1) A stable frame with vertically moveable rod to accomodate consistency plunger and setting time needles and having a cap at the top 2) Vicat muld in the form of frustum of a cone with internal diameter of 60mm. 3 Spilt type vicat mould with clamping ring. 4) MS base plate & Class base -plate for the mould5) Intial setting the needle 6) Final setting time needle 7) Standard consistency plunger (Equipment /supply must be of superior make and manufacutre and finish complete in all respect |
| 32 | LE - CHATELIER SOUNDNESS TEST APPRATUS (CEMENT): LE -Chatelier Moulds with IS Certificstion must be suplied for determination of Countness of cement and class A and Class B time The appratus must be confirmation with IS 5514,IS 1727 IS: 2645,IS 4031,IS 6932 (Part -9 with following minimum specifications. 1) Orit Spilt Cylinder mould 30mm diax30mm high made of spring brass with two indicators arms strongly soldered on either sides of spilt 2) Two galss plates 3) One load weight approximately 100gms .(Equipment /supply must be of superior make .manufacture and finish,complete in all respects) |
| 33 | SLUMP TEST APPRARTUS: As per IS Specifications IS 7320) Appartus must be complete for determination of slum of fresh concrete for measuring its conitency for aggregate size less than 38m.Appratus size slum cone,base plates & tamping road> (Equipment /supply must be of superior make/manufacure and finsh complete in all respects) |
| 34 | BITUMEN BINDER CENTRIFUGE EXTRACTOR) As per relevant IS specifcations ASTM D 2172: manually operated Bitumen Binder Centrifuge extractor for bitumenious mix up to 1.5 kg capacity with hand speed control with filter paper Discs (Set of 500 sheets) Equipment /supply must be of superior make /manufacure and finish complete in all respects. |
| 35 | SOFTENING POINT APPRATUS (RING & BALL METHOD) The test appratus must be as per IS 1205 /ASTMD36 relevant specifcations for determination of softening temperture of bitumen using ring and ball method.Equipment must be have built in heating facility,magentic strirrer and temperature controller.Appratus must be operational for 220V,50Hz Single phase AC supply,(Equipment/supply must be of superior make/manufacture and finish complete in all respects |
| 36 | CONSISTENCY TEST APPARTUS: The test apparatus must be as per IS 2720 Part 5 IS 9259 relevant spectifiactions for dtermination of consitstency (liquid Limt) of soils by Casagrande method .The appratus must be operational with counter,with IS/BS/ASTM prooving tools,gauging block.(Equipment/supply must be of superior make/manufacture and finish complete in all respects) |
| 37 | Universal Penetrometer with penatration cone and bitumen penetration KIT IS 1448 Part 60 ASTM:D937,IP: 179,BS : 4698 ASTM: D 217,IP: 50 ISO: 2137,EN: 1426,13179-2 Equipment must of following replicable parts. A) Universal penetrometer with adjustable head and display (01 No) b) Penetration cone for dterimnation of consistency of lubricating grease and oils ( 1 No) c) Bitumen penetration kit constisting of penetration needle copper transfer dish ,aluminum container ( 1 No) d) Penetration test cone for soils with cups (1 No) (Equipment/supply must be of superior make/manufacture and finish complete in all respect) |
| 38 | Pavement depth /thickness guage .MS Thickness Guage with minimum gauging depth 150mm (Complete & Operational in all respect |
| 39 | Califomia Bearing Ratio Appratus ( As per Specifications of IS : 9669,IS : 2720-XVI,etc ) Specification of CBR Moulds.The material for construction of the various equipment shall be as given in above standard .Mould: the Mould dia shall be 150mm Collor: the collor shall be made from same material as that of mould .two similar ears as in the case of the mould shall be cast integral with the body or welded Base plate : A suitable seating about 2mm deep shall be provided on the top face for proper seating of the mould Equipment must be of superior make /manfacture and finish Complete in all respect |
| 40 | SOIL COPACTION APPRATUS : As per specification /Ref standard of IS : 10074(part VII ) , IS 2720 (Part-VII), IS : 9198 .Equipment must consist of following for performing tests to dtermine denisty moisture rleations for soils a) Standard compaction Appratus ( Light compation /standard Proctor ) consisting of 1000 ml volume gun metal mould ,100mm dia (ID),127.3mm height b) Base plate & collar c) Hammer of 2.6 Kgs with 310mm fall Equipment must be of superior make /manfacture and finish Complete in all respect |
| 41 | Soil Compaction appratus ( Modified ) ( As per IS : 2720 (Part 8) ,IS : 9198 IS : 10074 Modified compaction mould in mild steel heavy compaction face /end with base plate and colour Equipment must be of superior make /manfacture and finish Complete in all respect |
| 42 | DYNAMIC CONE PENTROMETER FOR IN CBR .( AS PER ASTM D6951) Dynamic Cone penetrometer (DCP) is used for rapid in situ measurement of the structural properties of existing road pavement constructed with unbound materials .The Unit incorporates an 8 kg weight dropping mass trough a height of 575 mm .Avil with driving rod. Penetration road with 60 ,20mm dia cone.Spanners, Tommy bar,Bottle of adhesive .All contained in a carrying case .Case dimensions (1200x350x200mm approx) weight approx 30 kg |
| 43 | Cement Mortar Cube Moulds Cube Mould of 70.6mm size conforming To IS 10086-1982 Supply must be of superiormake /manfacture and finish Complete in all respect |
| 44 | Laboratory Electric Hot plates: Equipment must comprise of following minimum specification 1 SS/MS Top with size of 450mmx600mmx150mm (with dimension allowance of +10mm)2. Thermostat control and regulator. 3 Energy consumption up to 2.0 KW operational of 220v +10v,single phase,50Hz AC (Equipment must be of superiormake /manfacture and finish Complete in all respect |
| 45 | Automatic controlled single phase stablizer (10KVA).A per IS specification IS 9815. Equipment must be an indoor floor mounted single phase automatic (copper wound) I/P range 90V to 300V,single phase, O/P of 230+4% frequency 50-60Hz,Air colled construction with U/V,O/V,O/L protection system equipment must have working temperture range - 5 C to 550 C,95% RH with proper insulation resistance, including necessary supply of quality oil.(Equipment must be of superiormake /manfacture and finish Complete in all respect ) |
| 46 | Miscellaneous itemsa) Superior quality borosilicate bottles of 50ml capacity with capillary bored glass stopper for determination of specific gravity of soil/bitumen /powders etc. |
| 47 | Heat Resistance safety gloves of sperior quality |
| 48 | Natural high grade pigmented heavy duty latex hand gloves of medium size |
| 49 | Laboratory apron of superior make |
| 50 | Medium size SS scoops /Trowels |
| 51 | Superior quality and make Heavy duty LED flash light with chargeable battery |
| 52 | Superior Quality Masks |
| 53 | Knife /Spatula |
| 54 | Trichloroethylene |
| 55 | Glass Beaker 1 Ltr Capacity |
| 56 | General Tool Box |
| 57 | SS Container ( 1 Litre ) With lids |
| 58 | Disposable aluminum foil Container with lids |
| 59 | Traffic diversion cones ( Delinators |
