Repair And Renovation And Development Of Vss Market At Chhend. Works
Tender Value
70.86 Lakhs
Estimated cost
Bid Submission
05 Sep 2022
0 days left
EMD
70860
Bank guarantee accepted
Document Fee
11200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rourkela → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation And Development Of Vss Market At Chhend. Works
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing RCC chajja, Shelves, fins and parapet etc. |
| 2 | Fly Ash Brick having crushing strength not less than 75 Kg./Cm2 in cement mortar (1:6) in superstructure |
| 3 | window filling (1st floor) |
| 4 | boundary (ground) |
| 5 | Removing old lime or cement plaster from walls etc. |
| 6 | 12mm. Thick cement plaster (1:6) for brick work. |
| 7 | 1st floor |
| 8 | Parapet wall |
| 9 | 16mm. Thick cement plaster (1:6) over brick or stone masonary. |
| 10 | Boundary |
| 11 | 1st floor |
| 12 | 6mm. Thick cement plaster (1:4) over RCC ceiling |
| 13 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour T&P etc. complete. |
| 14 | Ground floor |
| 15 | 1st floor |
| 16 | Distempering two coats to wall with distemper of approved shade on new work to given an even shade excluding cost of distemper. |
| 17 | Ground floor |
| 18 | 1st floor |
| 19 | Wall painting Two coats with weather coat paint of approved shade on new work to give an even shade including cost of paint. |
| 20 | Ground floor |
| 21 | 1st floor |
| 22 | Proving & painting with mural paints to the out side surface of walls including all materials etc. (specific design) (approve rate of RMC) |
| 23 | 2.5cm damp proof course with cement concrete (1:2:4) using 12mm size hard granite chips. |
| 24 | 2.5cm. A.S.flooring with cement concrete (1:2:4) including punning using 12mm size HGCB chips. |
| 25 | Ground floor |
| 26 | 1st floor |
| 27 | Dismantling and removing 2.5cm thick grading concrete from roof slab cleaning the surface lowering and removing the debries within 50 M lead. |
| 28 | Providing and laying water proofs with polymeric bituminous membrane (Plastic flet) of 2.25 Kg / Sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene M.H.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg / sqm providing a coat of hot blown bitumen of 1.32 Kg / Sqm applying and laying plastic felt membrane with 10cm overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2 Kg / Sqm etc. complete. |
| 29 | Cleaning theexisting B.T.Surface with removal of foreign material with broom or soft brushes and finally dusting with old gunny bags or compressed air to receive bituminous etc complete |
| 30 | Cleaning the existing black toped surface weith removal of foreign materials with brooms or soft brushes and finally dusting with old gunny bags and / or compressed air to receive bituminous. |
| 31 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 Kg / Sqm. Using mechanical means as pr Clause 502 of MoSRT&H Specifications for Road & Bridge works (4th Revision.) |
| 32 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 Kg per Sqm on the prepared bituminous / granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H specifications for Road & Bridge works (4th Revision.) |
| 33 | Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over a previously prepared surface with a hydraostatic paver finisher with sensor control to the required grade, level land alignment and rolling with smooth whelled, vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H specifications for Road & Bridge works (4th Revision). |
| 34 | Providing and laying semi dense bituminous concrete with bath type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to work site, laying with a hydrostatic paver finisher weith sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibtratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specifications for Road & Bridge weorks (4th Revision.) |
| 35 | Road marking with hot applied thermoplastic compound with replectorising glass beads on Bituminous surface |
| 36 | Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debreis within 50 M lead. |
| 37 | Dismantling brick or stone masonary etc complete. |
| 38 | Earth work in ordinary soil within 50 m. initial lead and 1.5 m initial lift including ressing & breadingn etc. |
| 39 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the materials with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on weell prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision.) |
| 40 | Filling (F&P) with sand well watered and rammed. |
| 41 | C.C. (1:4:8) using 4cm size H.G.C.B metal etc. Complete. |
| 42 | RCC work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips. |
| 43 | Labour charges for cutting, bending, binding MS/TS rod including cost of materials etc. |
| 44 | Rigid & smooth centering & shuttering for RCC work etc |
| 45 | labour charges for Cutting, bendingMS/TS rodincluding cost of materials etc. |
| 46 | foundation and plinth |
| 47 | slab |
| 48 | 6mm thick cement plaster at (1:4)cm with punning etc complete |
| 49 | Excavated earth cleaned, lifting and transportation by truck within 5.00 km lead by truck using labour etc all complete. |
| 50 | Providing & laying factory made cement concrete paver block of 60mm thick and M-30 grade of concrete of required strength, thickness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including cost of all materials, labour, labour cess, royalties, conveyance, applicable taxes and T&P etc, complete |
| 51 | Painting two coats with approved paint in new or old wood/iron work over a coat of primer etc. |
| 52 | Cleaning of area and exesisting drain etc all complete. |
AI Tender Summary
Tender Timeline
Aug 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender