Military Engineer Services-MES has published Addn / Altn To Dental Room In Smc Alongwith Provn Of Trolley Mounted 25 Kva Stabilised Power Supply With Single Phase And Isolation Transformer At Af Stn Bhuj. Submission Date for this Tender is 19-09-2022. Industrial Trucks Tenders in bhuj Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Sep-2022 | AMENDMENT | Other | 12-09-2022 |
| 2 | 12-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-09-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolation oncrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & labour for precast cement concrete block masonary with solid blocks exc 10cm in width Type C1 (1:3:6) 20mm graded and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & labour for slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & labour for mild steel bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & labour for 25mm thick cement concrete type BO 1:2:4 using 12.5mm graded aggregate in sub base floors complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & labour for coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material & labour for vetrified Ceramic tiles dark shade double charged10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ® laid over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge |
| 13 | All as per item No 12 but on vertical surfaces with CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material & labour for glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over plaster ijn CM 1:4 complete all as specified and directed by Engineer in Charge. |
| 15 | Material & labour for in repairs for 20mm thick granite, z black (table rubbed and polished) for platforms, wall lining (veneering to wall), cills and in similar items laid over 12mm thick in cement mortar (1:3) and pointing with white cement(1:2) using marble dust with admixutre of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply & fix in repairs 20mm dia fancy type PVC coated best quality Drophery rods for curtains fixed to walls with screwscomplete all as specified and directed by Engineer-in-Charge. |
| 17 | Material & labour for 75mm thick cement concrete type C2 1:3:6 using 40mm graded aggregate as plinth protection finished even and smooth without using extra cement.complete all as specified and directed by Engineer-in-Charge. |
| 18 | Taking down cement plaster on brick or stone walls or PCC block wallingincluding raking out joints hacking for key scrubbingdown with water etc complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:4 for fair finished surfaces complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material & labour for rendering 10mm thickon concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material & labour for rendering 15mm thick in two layers first coat 10mm thick in CM 1:6 and second coat 5mmthickin CM 1:4 with wate proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured and paid separately. |
| 22 | Supply only water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & labour for preparing new plastered ceiling/soffits of chajjas surfaces and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material & labour for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of 1mm thickwall care putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material & labour for preparation of plastered or unplastered new extrernal wall surfaces of walls and applying two coats of exterior emulsion paint complete all as specified and directed by Engineer-in-Charge |
| 26 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames)n exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge. |
| 27 | Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply & fix PVC door PDS-01 comprising of shutter andframe all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings complete all as specified and directed by Engineer-in-Charge |
| 29 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, anythickness, including cover fillets complete all as specified and directed by Engineer-in-Charge |
| 30 | Supply & fix solid PVC wall lining consisting of 5mm thick plain colourPVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge. |
| 31 | Material & labour for anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material & labour for 12 mm thickperforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed anyu type of ceiling frame work or with staples on snap grid complete all as specified and directed by Engineer-in-Charge |
| 33 | Material & labour for aluminium window with double side hungshutter forglazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminiumbeading screws, type B20 100mm long suitable handle and anodised aluminum fittings such asstay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge.(Tint of glass shall be approved by GE)Note :- Aluminium grill fixed under aboveitem shall be measured and paid separately. |
| 34 | Material & labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply ,fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer"s instruction. Note- Quoted rate shalldeemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply & fix 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & fix 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & fix 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & fix aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & fix aluminium, anodised 100mm size of hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & fix continuous (Piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) in 40mm complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & fixfloor door stopper of brass body and tongue with hard drawn steel spring, overall length of cover plate 150mm and fixed complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & fixrotational moulded polythene white water storage tank tripple layared (cylindrical , vertical with closed top , ISI marked , ) hoisted and fixed in position all as specd in SSR Part 1 of capacity 500 ltrs including taking down existing tank also including provision of 20 mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum wt 455 gms) complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply & fix tinted sheet glass 5mm thick, selected quality and glazing with rubber beading in squaresexc 0.5 sq. m in each pane for fixing in aluminium sliding windows complete all as specified and directed by Engineer-in-Charge. Note- Rubber beading shall be measured & paid seperately. |
| 45 | Supply & fix rubber beading for fixing of glass ofitem No 44 above complete complete all as specified and directed by Engineer-in-Charge |
| 46 | Supply & fixstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staple complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mmmade out of standard aluminium moulded section of size 6mm x 7mmcomplete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply & fix in repairs of table top vitreous China wash basin, white, flat back, size 450mm x 810mm x 185 mm including chromium plated waste coupling, plug and chain, necessary brackets complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply & fix in repairs bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipes & wall flange fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply & fix in repair bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm dia of piep complete all as specified and directed by Engineer-in-Charge. |
| 51 | Supply & fix in repairs angular stop cock with adjustable wall flange, cast coper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, and fixed for bore 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply & fix in repairs chromium plated mixing valve (central hole basin mixer) with small spout without popup waste system with 450mm long braided hoses including three joints to steel pipe or unions complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & fix vitreous China wash basin, white, flat back, size 550x400 irunexcluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engineer-in-Charge |
| 54 | Supply & fix in repairs for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & fixin repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) including seat cover with hinhes device complete connected to p trap complete all as specified and directed by Engineer-in-Charge as in cupboard shutters |
| 56 | Supply & fixin repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply & fix in repairs PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply & fix in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply & fix chromium plated waste fittings with 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 60 | Supply & fix in repairs for bevelled edge mirror of size 600mm x 450mm selected quality glass mounted on6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply & fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply & fix in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 63 | Taking up on down steel tubing and connection incl cleaning for refining complete all as specified and directed by Engineer-in-Charge of the following bore of pipe:- |
| 64 | 15mm bore of pipe |
| 65 | 20mm bore of pipe |
| 66 | 25mm bore of pipe |
| 67 | Supply & fix CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cementcomplete to walls and ceilings or laid in floors of following sizes:- |
| 68 | 20mm nominal dia of pipes |
| 69 | 25mm nominal dia of pipes |
| 70 | 32mm nominal dia of pipes |
| 71 | Supply & fix in repairs brass chromium plated shower rose 125mm size, chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe complete all as specified and directed by Engineer-in-Charge. |
| 72 | Supply & fix PVC connection 450mm long with check nut for wash hand basin etc complete all as specified and directed by Engineer-in-Charge. |
| 73 | Dismantling of cast iron, PVCor reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge following bore of pipe:- |
| 74 | 100/110mm dia of pipes |
| 75 | 75mm dia of pipe |
| 76 | Supply & fix UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type "B" in any length, jointed with solvent cement fixed in walls and floors complete all as specified and directed by Engineer-in-Charge of following size:- |
| 77 | 110mm dia of pipe |
| 78 | 75mm dia of pipe |
| 79 | Supply & fix UPVC junction single "Tee" equal with door opening, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge of following sizes:- |
| 80 | 110mm dia of pipe |
| 81 | 75mm dia of pipe |
| 82 | Supply & fixUPVC sockets equal, ISI marked, IS-14735, jointed with solvent cement cement complete all as specified and directed by Engineer-in-Charge of following sizes :- |
| 83 | 110mm dia of pipe |
| 84 | 75mm dia of pipe |
| 85 | Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern)(wall hung type)white (excluding, flushing cistern and flush pipe) complete connected to drain complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply & fix UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply & fix UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes complete all as specified and directed by Engineer-in-Charge. |
| 88 | Supply & fix UPVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply & fix UPVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply & fixin repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply & fix 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works complete all as specified and directed by Engineer-in-Charge. |
| 92 | All as per item 77 above but 18mm thick plain PVC celuka ply complete all as specified and directed by Engineer-in-Charge. |
| 93 | All as per item 77 above but 12mm thick plain PVC celuka plycomplete all as specified and directed by Engineer-in-Charge. |
| 94 | All as per item 77 above but 05mm thick plain PVC celuka plycomplete all as specified and directed by Engineer-in-Charge |
| 95 | Supply & fix PVC coated basket for kitchen drawers of required size and including sliding channels complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply & fix 100mm size butt hinges, medium weight mild steel complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply & fixin repairs PVC shelffixed to walls with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge. |
| 98 | Supply & fixin repairs PVC corners fixedin bath rooms with screws including necessary drilling holes complete all as specified and directed by Engineer-in-Charge. |
| 99 | Complete removal of existing treatment on wall surfaces and applying two coats of distemper over a coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by Engineer-in-Charge. |
| 100 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants,regulators, sockets etc.incl removing materials to store for kepping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed by Engineer-in-Charge. |
| 101 | Taking down old tube light fittings of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge. |
| 102 | Taking down ceiling fan/Exhaust fan of any description and making good to disturbed surface of walls etc complete all as specified and directed by Engr-in-Charge (Old ceiling/exhaust fan to be deposited in MES store yard under AGE E/M sub division). |
| 103 | Taking down main switch/DB’s including MCB’s with board andfixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge. |
| 104 | Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVCinsulated and unsheathed as earth wire continuity with and pressed steel terminal box powder coated of suitable size 3mm thick bakelite white/colour sheet top cover ISI marked with brass screws and cup washers for housing switches, sockets, fan regulator, etc complete all as specified and directed by Engineer-in-Charge for the following :- |
| 105 | One light point controlled by one, one way switch single pole piano type |
| 106 | One fan point controlled by one, one way switch single pole piano type each |
| 107 | One 3 pin 5 Amps socket out let on independent board |
| 108 | One 3 pin 5 Amps socket out let on same board |
| 109 | All as per item No 90 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge. |
| 110 | Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing capingISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit). |
| 111 | Supply & fix in Replacement recessed mounting LED 2x2 luminaire with white acrylic flat light dissipater with LED light source of 34/36 Watt of size 2’x2’(Feet)square shape suitable for False/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Eng-in-Charge. |
| 112 | Supply and fixingin repairs wall mounted decorative ultra slimLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 113 | Supply and fixingin repairs wall mounted decorative ultra slimLED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engineer-in-Charge. |
| 114 | Supply & fix in replacement energy saving ceiling fan 1200 mm sweep and connecting up including provision of cable from ceiling rose or connector to fan andcomplete all as specified and directed by Engineer-in-Charge. Note:- Old u/s ceiling fan to be deposited at AGE E/M store yard |
| 115 | Supply & fix in replacement of metal body exhaust fan, AC single phase 230/240 volt of size 300 mm sweep with louvers including making hole of suitable size/alteration to the existing hole to fix the exhaust fan complete all as specified and directed by Engineer-in-Charge. Note:- Old u/s exhaust fan to be deposited in MES store yard) |
| 116 | Material & labour for wall mounted fan 400 mm sweep, 240 volts osillation type sturdy & heavy duty aluminium blade for higher air dilivery, nickel chrom plate guard, smooth oscillation complete in exisiting wall etc complete all as specified and directed by Engineer-in-Charge. |
| 117 | Supply & fix in replacement of ceiling rose surface bakelite 65mmx50mm three terminal complete all as specified and directed by Engr-in-Charge. |
| 118 | Supply & fix modular fan regulator step type 120 watt 2 module complete all as specified and directed by Engineer-in-Charge |
| 119 | Supply & fix modularsocket 6 Amp, 5 pin 2 in 1 combined 2 module 240 Volts complete all as specified and directed by Engr-in-Charge. |
| 120 | Supply & fix modularsocket 6/16 Amp, 5 pin 2 in 1 combined 2 module 240 Volts complete all as specified and directed by Engr-in-Charge. |
| 121 | Supply & fix modularswitch 1 way 6 Amp 1 combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 122 | Supply & fix modularswitch 1 way 16 Amp 1 combined 2 modulecomplete all as specified and directed by Engr-in-Charge. |
| 123 | Supply & fix modular white cover plate with frame of 3 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 124 | Supply & fix modular white cover plate with frame of 6 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 125 | Supply & fix modular white cover plate with frame of 8 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 126 | Supply & fix modular plastic surface box of 3 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 127 | Supply & fix modular plastic surface box of 6 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 128 | Supply & fix modular plastic surface box of 8 module ISI marked complete all as specified and directed by Engineer-in-Charge |
| 129 | Supply & fixing in replacement including testing of instantaneous water heater/geyser of vertical type of capacity 6 Ltr, Rated 3000W,230V AC, 50Hz Auto cutoff with a high tech adjustable thermostat,multifunction safety valve,Magnesium anode coated heating element, rust proof external body with unique polymer protective coated inner tank, red and green indicator lamp, suitable for high rise building, suitable for water pressure head upto 8 bars ,high density & thick PUF that ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed by Engineer-in-Charge Note:-The rate quoated shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard. Note:- Old u/s geyser to be deposited at AGE E/M store yard |
| 130 | Supply & fixing Geyser PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply & fixingquarter turn bib cock with flange,fancy type,cast brass with chrome finish crutch or butterfly handle ,screwed down ,screwed for iron pipe/CPVC Pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply & fixing quarter turn angle cock with flange 15 mm dia cast brass with chrome finish plate screwed down high pressure,fancy type,with long shank and cup(connected type),screwed both ends for iron pipe/CPVC Pipe complete all as specified and directed by Engineer-in-Charge. |
| 133 | Supply & fixing CPVC pipes 20mm dia SDR-11 & plain CPVC SDR-11 with all fittings on wall/ceiling or laying in floor/wall complete with proper steel saddling of half meter apart of each complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply & fix in Replacementmetal enclosure single pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps "C" series complete all as specified and directed by Engr-in-Charge. |
| 135 | Supply & fix double doorSheet metal enclosures factory made DBsprotection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 240 volts powder coated complete all as specified and directed by Engr-in-Charge |
| 136 | Supply & fix isolators/MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note:- Make of the isolator should be the same as that of DB) for the following:- |
| 137 | SP 240 volts 6-40 Amps capacity "C" series |
| 138 | SPN 240 volts 40 Amps capacity "C" series |
| 139 | Supply, install & testing air cooled split unit air conditioner 100% copper condenser & copper evaporator electric driven single phase of capacity of 1.5 TR indoor & outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating (as per 2019 BEE rating) including MS stand for oudoor unit, suction and delivery line copper material of suitable length as per site requirement complete including flexible copper cable 3 core 2.5 sqmm appx 2 M PVC drain pipe 20 mm dia approx 3 RM of including making holes to existing wall to draw cable and pipes to connect the indoor unit to the out door unit including provision of extra copper tubing/hoses etc and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge |
| 140 | Supply & fix voltage stabilizer for automatic operation wall mounted single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablized at 230 V with low and high cutoff facility including under and over current protection with accurancy of + 2.5% and of capacity 4.0 KVA complete all as specified and directed by Engr-in-Charge. |
| 141 | Supply, install, testing and commissioning of Servo controlled voltage stabilizer of capacity 25VA (Confirming to BIS 9815:Part1 :1994) Single phase,50 Hz, Oil cooled , outdoor , copper wound, metallic bodyduly powder coated with lifting Hooks two nos , digital display type, relay free smooth and silent operation with 1st filling of Transformer oil up to level having complete all as specified and directed by Engr-in-Charge for following specification:- (a)Input voltage190-280V, (b)Output voltage stabilized at any deigned/desired voltage 240V +- 1% (c) Rated frequency 50 Hz (d) No distortion in wave form (e)Response time not to exceed 10 mille seconds (f) Sensitivity (+/-)1% (g) Rate of correction 8 Volt/second for phase to phase (h) Efficiency not less than 95% (i)Type of load : single phase (j) Digital display Voltmeter/Ammeter (k) Protections:-Over load/Short Circuit protections |
| 142 | Supply and installation and commisioning of Isolation transformer, Outdoor type complete copper wound, oil cooled, class of insulation A, metallic body duly powder coated designed for I/C voltage 230+-5% and O/P voltage range 230+-5% with standard fittings, single phase with Primary & secondary winding ratio 1:1 ,with first filling of transformer oil of requisite dielectric strength up to level, efficiency not less than 95%, separator neutral bushing shall be brought out for earthing. Potential difference between N to E less than one Volt with all standard fittings like digital tem meter, adequate number of cooling radiators, lifting hook one set, earthing terminal two nos complete with over load/short circuit protection of capacity of 25 KVA complete all as specified and directed by Engr-in-Charge. |
| 143 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 2 core complete all as specified and directed by Engr-in-Charge. |
| 144 | Supply and fix industrial plug of capacity 63 Amps (2P+E) with complete accessories complete all as specified and directed by Engr-in-Charge |
| 145 | Supply & fix LED flood light-High Lumen output fitting of 100 Watt with exclusive innivative designed, long life versatile pressure die cast aluminium IP65 flood light luminaire with high power LED as light source complete all as specified and directed by Engineer-in-Charge. |
| 146 | Material and labour for four wheeler (7.50X16 size) with rims mounted) trolley made out of structural steel such as channels,angles etc. suitable for Voltage stabilizer 25 KVA, isolation transformer 25 KVA with cushionig arrangement by leaf springs and shockers between platform and axles ,complete with towing arrangement, tool kit cabinet with ring spanner set, jalli(XPM) around platform on angle iron frame of size 40x40x5 mm, opening arrangement from both side with locking arrangement for loading and unloading transformer including welding ,bending and drilling holes. Spray painting with two coats of synthetic enamel paint over a coat of primer overall surface oxide paint ,having shock absorbers,jack ,handle break with eye hook attachement for mover,with chasis of suitable roller bearing capacity for isolation transformer,voltage stablizer weight etc complete with all accessories for smooth functioning of trolley complete all as per manufacture instruction complete all as specified and directed by Engr-incharge as specified and directed. Note :- Any Item missing but required for functioning of trolly trailer will be the part of quoted rates. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
