|
| 1 | REPAIRS TO VEHICLE TATA MOBILE 207DIBA NO 11C-089394K |
| 2 | (i)Dismantling the alternator from Enginecompletely and supply and fix inreplacement rectifier 12 volt Qty- 01 Nos , diodes , ball bearings bushes and Armature with new and Fixing back the Dynamo Alternator assembly completely and reaffixing withengine withnecessary electrical connection etc. |
| 3 | (ii) Draining and taking out diesel tank assembly alongwith fuel pump and inserting hose and pouring a stream of clean hot water and with detergent by dispersing the product over the entire side surface by shaking and swirling. - 01 Job Complete. |
| 4 | (iii) Supply and fix in repair old damaged broken and choked up oil filter with new one qty - 01 Nos- 01 Job complete. |
| 5 | (iv) Supply and fixing glass bedding for all doors with new bedding -01 Job complete. |
| 6 | (v) Driain out gear box oil 03 ltr form the plug hole and topping up with new gear oil 03 ltrs - 01 Job Complete. |
| 7 | (vi)Repair replacement of door lock assembly with door lock actuator to the latch and from the latch to the knob - 01 Job Complete. |
| 8 | (vii) Checking of Specifiec gravity & level of Electrolyte, Topping up checking the tightness of the Terminal -01 Job Complete |
| 9 | (viii) Supply and fixing in repair new mechanical Machine for glass Assembly Qty-02 Nos . 01 Job Complete |
| 10 | (ix) Supply and fixing in repair Indication Lamp Assembly suitable for Tata Mobile207Qty- 02 Nos .01 Job Complete |
| 11 | (x)Supply and fixin repairglass beading for rear and front doors.01 Job Complete |
| 12 | (xi)Taking down front wheel hub and replacing the unserviceableparts and fixing back the same with proper alignment with greasing- 01 Job Complete. |
| 13 | (xii) Dismantling the gear box completely and deassembling the same and replacing the unserviceable parts with the new pinions and gear levers, bush bearing O rings packing and nut bolt and alignment and reaffixing with Engine base completely - 01 Job Complete |
| 14 | (xiii) Overhauling of the complete break Assembly and replacing break pad and springs, break disc with necessary machining and making alignment for smooth functioning of the break system01 Job complete |
| 15 | (xiv) Cleaning of complete internal surface with necessary cleaning agent - 01 Job Complete. |
| 16 | (xv) Supply and fixingin repairbulb with necessary holders and necessary new wirings etc. 01 Job Complete. |
| 17 | (xvi) Opening and servicing of the FIP with nozzles along with fuel line from engine chamber and from the fuel tank at the Rear and cleaning with polyether Amine for removing the solidifed deposit and fixing it back with proper arrangement alongwith fuel injetor- 01 Job complete |
| 18 | (xvii) Taking down front suspension and repair/replacement to the suspension assembly including tie rod arms, idler arms, rack and pinion ball joints with new one -01 Job Complete |
| 19 | (xviii) Water Servicing 01 Job complete |
| 20 | REPAIRS TO VEHICLE TATA MOBILE 207DIBA NO 11C-089393M |
| 21 | (i) Opening and servicing of the FIP with nozzles along with fuel line from engine chamber and from the fuel tank at the Rear and cleaning with polyether Amine for removing the solidifed deposit and fixing it back with proper arrangement alongwith fuel injetor- 01 Job complete |
| 22 | (ii) Draining and taking out diesel tank assembly alongwith fuel pump and inserting hose and pouring a stream of clean hot water and with detergent by dispersing the product over the entire side surface by shaking and swirling. - 01 Job Complete. |
| 23 | (iii)Taking down and replacement of the prop shaft Cross two joint from the rear Axle Drive and the transfer Case front Drive Axle - 01 Job Complete |
| 24 | (iv) Taking down front suspension and repair/replacement to the suspension assembly including tie rod arms, idler arms, rack and pinion ball joints with new one -01 Job Complete |
| 25 | (v) Driain out gear box oil 03 ltr form the plug hole and topping up with new gear oil 03 ltrs - 01 Job Complete. |
| 26 | (vi)Repair replacement of door lock assembly with door lock actuator to the latch and from the latch to the knob - 01 Job Complete. |
| 27 | (vii) Checking of Specifiec gravity & level of Electrolyte, Topping up checking the tightness of the Terminal -01 Job Complete |
| 28 | (viii) Supply and fixing in repair new mechanical Machine for glass Assembly Qty-02 Nos . 01 Job Complete |
| 29 | (ix) Supply and fixing in repair Indication Lamp Assembly suitable for TATA MOBILE207Qty- 02 Nos .01 Job Complete |
| 30 | (x)Supply and fixin repairglass beading for rear and front doors.01 Job Complete |
| 31 | (xi)Taking down front wheel hub and replacing the unserviceableparts and fixing back the same with proper alignment with greasing- 01 Job Complete. |
| 32 | (xii) Dismantling the front side suspension complete, removing out the unserviceable Brass bushes from Body and supply and fixing in repair brass bushes ofsuitable size ,with necessary foundry work and refixing the all dismantled Items andneccessaryalignment etc- 01 Job Complete |
| 33 | (xiii) Overhauling of the complete break Assembly and replacing break pad and springs, break disc with necessary machining and making alignment for smooth functioning of the break system01 Job complete |
| 34 | (xiv) Cleaning of complete internal surface with necessary cleaning agent - 01 Job Complete. |
| 35 | (xv) Supply and fixingin repairbulb with necessary holders and necessary new wirings etc. 01 Job Complete. |
| 36 | (xvi)Dismantling the alternator from Enginecompletely and supply and fix inreplacement rectifier 12 volt Qty- 01 Nos , diodes , ball bearings bushes and Armature with new and Fixing back the Dynamo Alternator assembly completely and reaffixing withengine withnecessary electrical connection etc. |
| 37 | (xvii) Supply and fixing in repairnew seat covers for all seats for front and rear side . 01 Job Complete |
| 38 | (xviii) Water Servicing 01 Job complete |
| 39 | REPAIRS TO VEHICLE EICHER 10.75 BA NO 11 D 184986P |
| 40 | (i) Repair and re conditioning of self starter including Dismantling from Engine and dismantling the unserviceable bushes,bearings,carbon brushes solenoid switches including,Aluminium Body ,Armature , varnishing, greasing and re assembling, the self starter and reaffixing back the self motor and fixing back completely.01 Job Complete |
| 41 | (ii) Draining out of oldGear oil from Gear Box and Topping up with new Gear oil 80W/90 Qty-03 ltrs. 01 Job Complete |
| 42 | (iii) Draining out ofoldDifferential Oil from Differential Chamber and Topping up with the new Differential oil Qty-01 ltrs. 01 Job Complete |
| 43 | (iv) Draining out ofold Coolant water mixture from Radiator and filling Mixture of Coolant and water in Radiator in Complete Qty-05 ltr 01 Job Complete |
| 44 | (v) Supply and Fix in repair of old damaged ,Broken and Choke up Fuel Filter with new one Qty-01 No01 Job Complete |
| 45 | (vi)Supply and Fix in repair old damaged ,Broken and Choke up Oil Filter with new one Qty-01 Nos 01 Job Complete |
| 46 | (vii) Draining out ofold Engine oil from EngineChamber and Topping upwith new Engine oil 20W/40.Qty- 05 ltrs01 Job Complete |
| 47 | (viii) Dismantling the alternator from Enginecompletely and supply and fix inreplacement rectifier 12 volt Qty- 01 Nos , diodes , ball bearings bushes and Armature with new and Fixing back the Dynamo Alternator assembly completely and reaffixing with engine withnecessary electrical connection etc. 01 Job Complete. |
| 48 | (ix)Wheel Alignment and balancing of wheels complete- 01 Job Complete. |
| 49 | (x) Dismantling the fuel Tank from chasiscompletely and removing out the corroded parts of Tank with necesary welding and brazing work etc including the cleaning of the tank Completely with chemical and reaffixing the Tank and supply and fixing in repairnecessary clamps, nut bolt for fixing thehose pipeComplete etc. 01 Job Complete |
| 50 | (xi)Repairs to body with welding, tinkering, denting and painting of the vehicle ( Sheet metal body and chasis Frame-01 Job Complete. |
| 51 | (xii)Taking down front wheel hub and replacing the unserviceable parts fixing back the same - 01 Job Complete |
| 52 | (xiii)Taking down wind screen assembly, opening and cleaning for carry out repair and replacement of following unserviceable items all as specified and directed by Engineer-in-Charge (Wiper Blade-Set 01, wiper motor -01 Set |
| 53 | (xiv) Repair to exhaust manifold assembly with repair to silencer assembly - 01 Job Complete |
| 54 | (xv) Repairs to cabin door both left and right with locking arrangement welding to hinges of door - 01 Job complete |
| 55 | (xvi) Taking down suspension assembly for overhauling (Front and Rear) cleaning servicing, greasing complete and refixing - 01 Job complete |
| 56 | (xvii) Water servicing of vehicle after carrying out the all repairs works. |
| 57 | REPAIRS TOMOTOR CYCLEBA NO 12A 062720W |
| 58 | (i)Opening and draing out the engine oil from engine chamber and refiling with new engine oil 01 Liters 20W/40 Complete.. |
| 59 | (ii) Replacement of brake cables (front and rear), clutch cables, throttle cable assembly with new cables- 01 Job Complete. |
| 60 | (iii) Removal of carburetor with overhauling and refixing back to its position.. |
| 61 | (iv)Replacement of broken Buzzer indicators with new buzzer indicators -01 Job complete. |
| 62 | (v) Repair/Replacement of following spares parts necessary for smooth functioning of Vehicle (a) Side view mirror,(ii) Side stand (iii) Leg Guard (iv) Side panel set (v) Rider front rest (vi) Pillion foot rest (iv) Mudguard Front and rear (n) Cylinder Kit (m) Wheel Rim rear and front (n) Looking mirrors |
| 63 | (vi)Repair replacement of brake shoe and break drum rubber for break assembly- 01 Job Complete. |
| 64 | (vii) Replacement of clutch assembly - 01 Job complete. |
| 65 | (viii) Water Servicing 01 Job complete |
| 66 | (ix) Services charges including oiling and greasing |
