|
| 1 | PRINTING UNIT (TECHNICAL DETAILS) AT –BHAGAIYA(GODDA) |
| 2 | PRINTING TABLE ( TEXTILE FABRICPRINTING TABLE WITH AC TOP SUITABLE TO FIX CLOTH FOR PRINTINGAND CLAMP TO FIX SCREEN AS PER SCREEN.ALSO MUST HAVE THE OPTION TO FIX STEAM LINE ,WHEN NEEDED.SIZE : 20 FT/5 FT/ 3 FT ). |
| 3 | RUBBER SQUEEZER (RUBBERSQUEEZER, 30CM, THICKNESS : 9MM ,WIDTH :50 MM,IN DIFFERENT SHAPE LIKE PLAIN ,ONE SIDE CUT, V/U TYPE,POINT CUT ETC., SHORE HARDNESS : 60/65). |
| 4 | COTTAGE STEAMER ( STEAM PRESSUREAGER) (STEAMING CHAMBER FOR FIXATION OF ALL TYPE OF REACTIVE DYES AFTER PRINTING .FABRIC WIDTH UPTO 72 INCH . HEATED DOUBLE INSULATED WALL, TOP AND BOTTOM STEAMING SYSTEM , STEAM HEATING AND TEMPERATURE DISPLAY THROUGH CONTROL PANEL, TEM. 102 DEG. CEL. FOR REACTIVE AND ACID DYE. ,STEAM SUPPLY THROUGH BOILER. 30 Kg Capacity). |
| 5 | OPEN WIDTH JIGGER (SEMIAUTOMATIC JIGGER MACHINE, ROLL WIDTH: 66 INCH , ROLL CENTRE : 21 INCH , CAPACITY : 150KG( 100 GSM), BATCH DIA: 800MM, STRUCTURE OF MACHINE IN C.I AND SS TANK FOR WASHING OF PRINTED FABRIC, MAIN TANK MADE OF SS 316 ,WITH SUPPORTING FRAME HAING A OVEL SHAPE WINCH DRIVEN THROUGH DIRECT SHAFT MOUNTING GEAR MOTOR,FOUR SET OF TIA BAR TO RUN THE MACHINE IN ROPE FORM ,ELECTRIC HEATING ELEMENT TO TAKE THE TEMPERATURE UPTO 75 DEG. WITH TEMP. CONTROLLER, CHEMICAL DOZING TANK WITH VALVE.CAPACITY : 100 KG). |
| 6 | CYLINDER DRYING MACHINE ( FLOATDRIERFOR PRINTING ) (Float dryer to dry printed fabric by hot air.Printed fabric will just floating between hot air cushions from top and bottom sides blown by high-velocity fans. Should be fully equipped with panels to dry printed fabric. All panels to be filled with glass wool that is keeping and avoiding the loss of heat without using any Conveyor. Cylinders should be of 22” dia face, width : 66 inch , Should be fabricated from 16 to 10 SWG of 304 or 316 quality stainless steel Argon arc welded consisting M.S. Dished end, Suitable for 40 to 100 P.S.I. Working Pressure. Must be provided with Suitable steam inlet out let connection provided). |
| 7 | TABLE TOP DRIER & HAND DRIER (Table Top Drier for Drying of Printing Inks after Printing on Table, Roller Type for free Movement on Table as per requirement , Width of the Drier :60 Inch , Length : 30 Inch Hand Drier ( Portable ) for Drying of Printing Inks after Printing). |
| 8 | HEAVYBOILER (FULLY AUTOMATIC STEAM BOILER (IBR / NON IBR ) , FUEL : DIESEL / GAS, BUILTWITH SEAMLESS SHELL AND SEAMLESS TUBE ,LOW FUEL CONSUMPTION, BOILER CAPACITY : 500 KG, WITH PROPER INSULATION FOR MAXIMUM EFFICIENCY ,WATER INLINE ,DRAIN LINE ,WATER TANK,FUEL TANK, ELECTRIC CONNECTION FROM MCB , ALL TO BE DONE BY SUPPLIER). |
| 9 | STEAM PIPELINE AND CONDENSATE LINE (STEAM PIPELINE AND CONDENSATE PIPELINE WITH INSULATIONFROM BOILER TO ALL RELATED MACHINES AND ALLPRINTING TABLE , DIA. OF PIPE LINE WILL BEAS PER MACHINE REQ. WITH SUITABLE VALVES). |
| 10 | SCREEN LIGHTING ARRANGEMENT (PROPER LIGHTING ARRANGEMENT TO BE DONE BY SUPPLIER ON 4 PRINTING TABLESFOR PROPER VIEW OF PRINTING). |
| 11 | WASH ROOM TROLLEY (FRP TROLLEYWITH WATER DRAINAGE FACILITY OF LENGTH4FT/WIDTH 3 FT/HEIGHT : 2 FT, WHEEL : 6 INCH REVOLVING FACILITY FOR EASY MOVEMENT). |
| 12 | WATER TANKS (PVC WATER TANK OF VARIOUS CAPACITY , 10 LTR, 50 LTR, 100 LTR, 500 LTR, 1000 LTR, 2000 LTR). |
| 13 | BRASS VESSELS (BRASS VESSELS OF VARIOUS CAPACITYFOR STIRRING AND MAKING PRINTING DYES FOR PRINTING : 100 ML, 250 ML, 500 ML, 1 LTR, 5 LTR, 10 LTR, 20 LTR). |
| 14 | DYE PASTE STIRRER (SUITABLE STIRRER FOR CHEMICAL MIXING INSIDE THE DRUM OF ANY CAPACITY FROM 20 LTR. TO 210 LTR. ,AIR MOTOR DRIVEN WITH PRESSURE REGULATOR ,FLOW REGULATING VALVE, WORKS WITH VARIOUSRPM TO AVOID SPILLAGE, HIGH TORQUE MOTOR FOR CORRECT MIXING AND AGITATING). |
| 15 | SPOT REMOVAL GUNS (TEXTILE STAIN CLEANING SPRAY SPOT GUN ,METAL BODY, PLASTIC TANK, ADJUSTABLE STRAIGHT NOZZLE, WITH FREE ADDITIONAL NOZZLE AND WONDER TRIMMER .ELECTRICALLY OPERATED). |
| 16 | WEIGHING MACHINE (ELECTRONIC WEIGHING BALANCE,ELECTRIC AS WELL AS BATTERY OPERATED WITH CALLIBRATION CERTIFICATE .CAPACITY : 300 GM, SENSTIVITY : .001 GMCAPACITY : 5KG, SENSTIVITY : 1GMCAPACITY : 50 KG,SENSTIVITY :100GM). |
| 17 | BLOCK PRINTING MACHINE DETAIL |
| 18 | PRINTING TABLE (TEXTILE FABRICPRINTING TABLE WITH AC TOP SUITABLE TO FIX CLOTH FOR PRINTINGAND CLAMP TO FIX SCREEN AS PER SCREEN.ALSO MUST HAVE THE OPTION TO FIX STEAM LINE ,WHEN NEEDED.SIZE : 20 FT/5 FT/ 3 FT). |
| 19 | BLOCKS ( WOODEN BLOCKS, BEST QUALITY FOR BLOCK PRINTING OF SIZES :2 INCH/2 INCH 3 INCH/3 INCH5 INCH/5 INCH6 INCH/ 6INCH8 INCH/8 INCH). |
| 20 | BLOCKS ( METAL (BRASS)BLOCKS, BEST QUALITY FOR BLOCK PRINTING OF SIZES :2 INCH/2 INCH 3 INCH/3 INCH5 INCH/5 INCH6 INCH/ 6INCH8 INCH/8 INCH). |
| 21 | DIGITAL PRINTING (TECHNICAL DETAIL) |
| 22 | DIGITAL TEXTILE PRINTING MACHINE – 6 COLOUR HEAD (High speed Direct to Fabric Digital Textile printer to print directly on natural and synthetic fabric.With 6 Color Head , Indutrial Grade Jetting Assemblies , Resolution : upto 1440 dpi, Pressure purge and wiping cleaning method, Ink can be Reactive/Disperse/Pigment/Acid , Fabric upto 3 mm thickness can be print , Maximum width of Fabric : 1800 mm , Fabric Drying System : Infrared Heaters, High Speed 2.0 printing interface , Operating Condition : 20-28 deg. Celcius , relative humidity : 60-70% RH). |
| 23 | COMPUTER + SOFTWARE (Latest Computer, Next generation Core I 5 ;Suitableto runDigital Printing Machine And Should be uploaded with required Software for Running Digital Printing Machine). |
| 24 | PRINTING UNIT |
| 25 | ETP (Suitable effluent treatment plant to treat and discharge effluent of a FABRIC PRINTINGunit based on following capacities and characteristics.The total effluent generated Wouldbe 20 M3/day The effluent treatment plantisto be designed as it should be suitable to treat up to 20 M3 in maximum 10 HoursTreated effluent quality after primary treatment / clarification should be as follows:PARAMETERS VALUES PH 6.5 to 7.5BOD (5 days) maxBelow 30 ppmCODBelow 250 ppm TSSBelow 100 ppmColorClear TransparenceOffer must include the following :A) Full Civil Work for installation of ETP.B) FULLETP PLANT INCLUDING ALL ACCESSORIES , MECHANINCAL , CIVIL , ELECTRICAL JOB C) Electric PanelWork From Meter to Machine Panel .D) Chemical and other Spares for 15 Days Successful running of the Machine). E) FULL INSTALLATION AND TRAINING FOR 15 DAYS TO RUN THE MACHINE) |
| 26 | LABORATORY ( A) WASHING FASTNESS TESTER (ISO )- TO TEST THE WASHING FASTNESS AFTER WASHING AT DESIGNATED TEMP. WITH GRADING SCALE SET.B) RUBBING FASTNESS TESTER : RUBBING FASTNESS TESTER TO CHECK FASTNESS AGAINST RUBBING). |
| 27 | GENERATOR 50 KVA (50 KVA ,440 VOLT DG SET WITH BASE CIVIL WORK STATION , CHHAJA FOR DG FOR SAFETY WITH ALL ELECTRIC CONNECTION). |
| 28 | COMPUTER (INTEL CORE I5 (SIXTH GENERATION),8GB RAM, 500GB INTERNAL STORAGE,17 INCH LCD MONITOR, WIRELESS NETWORK ADAPTOR ,KEY BOARD AND MOUSE). |
| 29 | OTHER REQUIRED MACHINES FOR DIGITAL PRINTING MACHINE BUT MISSING IN DPR |
| 30 | PADDING PROCESS MACHINE (FABRIC COATING OR PADDING MANGLE WITH PROPER ATTACHMENT ( MINI STENTER ) FOR PRE PROCESS OF PADDING OF COTTON /MIXED/SYNTHETIC FABRIC FOR DIGITAL PRINTING .72 INCH ROLL WIDTH, 10 INCH ROLL DIAMETER, PLAITING DOWN AND BOG BATCHING ARRANGEMENT , HEATING : BY GAS/STEAM/ELECTRICAL , A.C.DRIVE, ADJUSTABLE UPTO 10 TON PNEUMATIC PRESSURE SUITABLE FOR PADDING FABRIC COATING (PADDING) MACHINE, WIDTH OF MACHINE : 10 FT, LENGTH OF MACHINE : 27 FT). |
| 31 | OTHER REQUIRED MACHINES MISSING IN DPR(PRINTING UNITS) |
| 32 | FABRIC INSPECTION MACHINE (70 INCH FABRIC WIDTH, FABRIC INSPECTION MACHINE SUITABLE FOR INSPECTION OF COTTON AND SILK FABRIC ,FABRIC ROLL TO ROLLINPUT AND OUTPUT,70/20 INCH VIEWING GLASS WITH 2 WAY LIGHTING ARRANGEMENT FOR EASY VIEW AND INSPECTION,MOTORISED VARIABLE SPEED UPTO 18 MTR/MIN,1HP DC MOTOR). |
| 33 | HYDRO EXTRACTOR (ALL S.S.BODY, SILENT VIBRATION LESS OPERATION, AUTO TIMING,AUTO DC BREAK, SAFETY PRECAUTION ,CAPACITY : 25 KG). |
| 34 | CALENDERING MACHINE (TEXTILE CALENDERING MACHINE , 66 INCH Single Roller Calendering Machine Used to calendar cotton, chemical fiber, blend fabric, etc.,Single Roller Heating, Heating Medium can be either Heater or Steam Operatedor Gas Operated With extra attachment as needed for Silk or CottonFabrics, With full Panel for Reverse or Forward Movement .Easy to work and Install ,Low Maintenance). |
