|
| 1 | Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. |
| 2 | Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. Size-8 inchx6 inchx1.5 inch |
| 3 | Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. Size-40x40x6mm |
| 4 | Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. |
| 5 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm |
| 6 | Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 sqmm |
| 7 | Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps DP |
| 8 | Supplying, installation, testing and commissioning of 500 LPD SHWH System . Each system with 500L Tank Insulated with high density PUF ,outer body powder coated with GI sheet, inner tank with 1.5/2mm thick coated with rust proof and cladded with Pre-coated Sheet, Evacuated Tubes -58 mm Dia x 2100mm L 32 Nos. Air Vent and Support appropriate capacity electrical back up arrangement and supporting stands, excluding inlet and out let pipes including labour charges and taxes etc complete. 500 Liter capacity. |
| 9 | Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement & testing of joints complete. (Internal work exposed on wall) 20mm nominal OD pipes. |
| 10 | -do- 25mm nominal OD pipes |
| 11 | -do-32mm nominal OD pipes |
| 12 | -do-40mm nominal OD pipes |
| 13 | Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications.(For 1000 litre capacity). |
| 14 | Providing and fixing in position brass ball valve high or low pressure with plastic float of approved quality 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. |
| 15 | Providing and fixing in position 25 mm nominal bore gun metal non-return valve horizontal type of approved makke leads complete as per specifications. |
