Construction / Retrofitting Of Pipe Water Supply Scheme At Karandi, Tal. Satara, Dist- Satara
Tender Value
56.79 Lakhs
Estimated cost
Bid Submission
03 Sep 2022
0 days left
EMD
56796
Bank guarantee accepted
Document Fee
5250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
karandi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction / Retrofitting Of Pipe Water Supply Scheme At Karandi, Tal. Satara, Dist- Satara
BOQ
| Sl. No. | Item Description |
| 1 | Sub Work No. 1 :- Pumping Machinary |
| 2 | Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
| 3 | A) 10.00 HP Submerssible Pumpset 16 stage |
| 4 | Item No. 2 - Providing & fixing valves of following dia. Including all taxes central & local transportationall matrial & labour charges etc. comp. |
| 5 | (A) 80mm dia Sluice Valve |
| 6 | (B) 80 mm dia Reflux Valve |
| 7 | ITEM NO.3- Providing & Supplying & layingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportation all labour etc. comp. |
| 8 | (A) 80 mm dia. G.I. med class Pipe |
| 9 | Item No. 4- Providing & fixing MS flanged specials including all matrial & labour charges etc. comp. |
| 10 | Item No. 5:- L.T. Control Panel Board - Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
| 11 | 1) MS sheet fabricated box for panel board |
| 12 | 2) Self Locking arrangement |
| 13 | 3) Marine water proof plywood |
| 14 | 4) ELCB 63Amp 4 Pole |
| 15 | 5) Volt Meter |
| 16 | 6) Ammeter |
| 17 | 7) Capacitor polypropylene condenser |
| 18 | 8) Pilot Lamp Set |
| 19 | 9) FASD starter |
| 20 | 10) Metal clad TPN switch 63 Amp |
| 21 | 11) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
| 22 | Item No. 6 :-Cables - Providing & Fixing Submersible cable 3 core 6 Sq. mm including all material & labour charges etc. comp. |
| 23 | Item No.7 :- Providing structural steel work in rolled stanctions composed of RSJ channel, etc., with caps, bases, mild steel plates, angles, brackets, cleats, gusset, plates, anchor bolts, etc. as per detailed design, drawings, or as directed by Engineer-in-charge including cutting, fabricatings, hoisting, erecting, fixing in possition, making riveted. bolted/welded connections etc, complete. |
| 24 | SUB WORK NO.2 - Rising Main |
| 25 | ITEM NO.1- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984/1415 / 1278 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 26 | {A} 110 mm dia.HDPE 12.50 kg/cm2 Pipe |
| 27 | ITEM NO.2 - Providing & supplying non return Valve of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
| 28 | [A] 100 mm dia.Non Return Valve |
| 29 | ITEM NO.3 - Providing & supplying AirValve of following dia. of approved make including all taxes central & local transportation to site loading unloading etc. comp. |
| 30 | (A) 25 mm dia. Air Valve PN-1 |
| 31 | ITEM NO.4- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 32 | A} 100 mm dia. G.I. pipe med. Class |
| 33 | ITEM NO.5 - Providing & fixing PVC/GI/MS Spcials such asFlange ,bend, Elbow as per requirment including all taxes material & labour charges etc. comp. |
| 34 | ITEM NO.6- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 35 | (A) SOIL |
| 36 | (B) HARD MURUM |
| 37 | (C) Soft Rock |
| 38 | (D) Hard Rock |
| 39 | ITEM NO.7 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 40 | ITEM NO.8- Lowering, Laying and Jointing H. D. P. E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 41 | {A} 110 mm dia.HDPE 12.50 kg/cm2 Pipe |
| 42 | ITEM NO.9- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 43 | [A] 100 mm dia.Non Return Valve |
| 44 | ITEM NO.10- Lowering , laying & fixing in proper alignment and position Air valveof following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 45 | (A) 25 mm dia. Air Valve PN-1 |
| 46 | ITEM NO.11- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 47 | A}100 mm dia. G.I. pipe med. Class |
| 48 | ITEM NO.12- Providing & fixing C.I. road box including loading unloading & carting to site of work including all necessary excavation in all types of strata & fixing in murum packing comp. |
| 49 | a} 100 mm X 225 mm (20kg) |
| 50 | ITEM NO.13- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 51 | ITEM NO.14- Hydraulic testing of H. D. P. E./ M. D. P. E. pipeline to specified pressure including cost of all materials andlabour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. |
| 52 | {A} 110 mm dia.HDPE 12.50 kg/cm2 Pipe |
| 53 | ITEM NO.16 - Providing & laying in situ C.C.M-15 of trap metal for foundation & bedding including formwork & compaction etc.comp. |
| 54 | ITEM NO.17- Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, comp. |
| 55 | (A) Couplers 110 mm |
| 56 | (B) Elbow 90 Deg. 110 mm |
| 57 | © Elbow 45 Deg. 110 mm |
| 58 | (D) Spigot LNPE 110 mm |
| 59 | (E) Reducer 110 x 75 mm |
| 60 | (F) Tee 110 mm |
| 61 | SUB WORK NO.3- Distribution System |
| 62 | ITEM NO.1- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 63 | (A) 110 mm dia. HDPE 6 kg/cm2 Pipe |
| 64 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 65 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 66 | ITEM NO.2- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 67 | A}100 mm dia. G.I. pipe med. Class |
| 68 | B}80mm dia. G.I. pipe med. Class |
| 69 | C}65mm dia. G.I. pipe med. Class |
| 70 | ITEM NO.3 - Providing & supplyingin position Sluice Valve of following dia. Including all taxes, jointing material etc. comp. |
| 71 | [A] 100 mm dia.Sluice Valve PN 1.0 |
| 72 | [B] 80 mm dia.Sluice Valve PN 1.0 |
| 73 | [C] 65 mm dia.Sluice Valve PN 1.0 |
| 74 | ITEM NO.4- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 75 | (A) SOIL |
| 76 | (B) HARD MURUM |
| 77 | (C)Soft Rock |
| 78 | (D)Hard Rock by Chiselling |
| 79 | ITEM NO.5 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 80 | ITEM NO.6- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 81 | (A) 110 mm dia. HDPE 6 kg/cm2 Pipe |
| 82 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 83 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 84 | ITEM NO.7- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 85 | A}100 mm dia. G.I. pipe med. Class |
| 86 | B}80mm dia. G.I. pipe med. Class |
| 87 | C}65mm dia. G.I. pipe med. Class |
| 88 | ITEM NO.8 - Providing & fixing C.I. road box including loading unloading & carting to site of work including all necessary excavation in all types of strata & fixing in murum packingcomp. |
| 89 | a} 100 mm X 225 mm (20kg) |
| 90 | ITEM NO.9- Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. |
| 91 | (A) Couplers 110 mm |
| 92 | (B) Couplers 90 mm |
| 93 | (C) Couplers 75 mm |
| 94 | (D) Elbow 90 Deg. 110 mm |
| 95 | (E) Elbow 90 Deg. 90 mm |
| 96 | (F) Elbow 90 Deg. 75 mm |
| 97 | (G) Elbow 45 Deg. 110 mm |
| 98 | (H) Elbow 45 Deg.90 mm |
| 99 | (I) Elbow 45 Deg. 75 mm |
| 100 | (J) Equal Tee 110 mm |
| 101 | (K) Equal Tee 90 mm |
| 102 | (M) Equal Tee 75 mm |
| 103 | (N) Reducer 110 x 75 |
| 104 | (O) Reducer 110 x 90 |
| 105 | (P) Reducer 90 x 75 |
| 106 | (R) Spigot LNPE 110 mm |
| 107 | (S) Spigot LNPE 90 mm |
| 108 | (T) Spigot LNPE 75 mm |
| 109 | U) End Cap 75 mm |
| 110 | ITEM NO.10 - Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 111 | ITEM NO.11- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 112 | [A] 100 mm dia.Sluice Valve PN 1.0 |
| 113 | [B] 80 mm dia.Sluice Valve PN 1.0 |
| 114 | [C] 65 mm dia.Sluice Valve PN 1.0 |
| 115 | ITEM NO.12- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 116 | (A) 110 mm dia. HDPE 6 kg/cm2 Pipe |
| 117 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 118 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 119 | ITEM NO.13 - Providing & laying in situ C.C.M-15 of trap metal for foundation & bedding including formwork & compaction etc.comp. |
| 120 | ITEM NO. 14 -Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge |
| 121 | ITEM NO.15 - Providing & fixing MS Flanged specials including all material & labour chargesetc.comp. |
| 122 | SUB WORK NO.4 - MISCELLAEOUS WORK |
| 123 | Item No.1-Providing & fixing an information board of standard size & specification etc. comp. |
| 124 | ITEM NO.2 - Commisioning running & maintaining the scheme to quantites rated capacity including manning necessary persoonel such as requirment of scheme & who should also administer chemical dose for one month together with trainning of persoonel spared by local body & handing over the scheme to local body after completion of above period as directed by Engineer incharge.( For one month) |
AI Tender Summary
Tender Timeline
Aug 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender