Periodical Maintenance Of Road From Raishyabari Market To Khetradhan Para ( L-033 ) Pmgsy Road Taken Over By Pwd ( R&B ) ( Length = 2.198 Km ) During The Year 2022-23 / Sh:- Patch Wbm-3, Re-Carpeting, Tack Coat, Seal Coat Etc.
Tender Overview
Project Description
Periodical Maintenance Of Road From Raishyabari Market To Khetradhan Para ( L-033 ) Pmgsy Road Taken Over By Pwd ( R&B ) ( Length = 2.198 Km ) During The Year 2022-23 / Sh:- Patch Wbm-3, Re-Carpeting, Tack Coat, Seal Coat Etc.
BOQ
| Sl. No. | Item Description |
| 1 | SH:- Site clearance |
| 2 | Clearing and Grubbing Road LandClearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRD Technical Specificationclause 201. I) By Manual MeansIn area of non-thorny jungle |
| 3 | SH- Earthwork, erosion control and drainage. |
| 4 | Surface DrainsConstruction of unlined surface drains of average cross-sectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.i) Surface Drains in Ordinary SoilA) Manual Means |
| 5 | SH- Maintenance of roads |
| 6 | Maintenance of Earthen shoulder (Stripping of excess soil)Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. |
| 7 | SH:- Granular Sub-bases, Bases (Non bituminous) and Shoulders. |
| 8 | Water Bound Macadam Sub-Base / Base using Jhama Brick Aggragatei) WBM Grading 3Providing, laying, spreading and compacting 53 mm to 0.075 mm jhama brick aggregates to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405. |
| 9 | SH:- Bases and Surface Courses (Bituminous) |
| 10 | Prime Coatii) Medium porosityProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.20 kg/sqm using mechanical means as per MoRD Technical Specification Clause502. |
| 11 | 20 mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/ modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 KN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508.Case - IBy Manual Means(I) Bitumen of VG-30 |
| 12 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.(A) By Manual MeansCase - IV : Type D (premix with fine sand)(I) Bitumen (60/70 Grade) VG-30 |
| 13 | SH:- Miscellaneous Items for Roads |
| 14 | Tack Coat using hot straight run bitumen of Grade VG-30 on bituminous surface.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On Bituminous surface @0.50 kg/sqm. |
| 15 | Seal coat on old bituminous road surface.Sand seal coat on old bituminous road surface by applying Viscocity Graded (VG-30) bitumen @ 1.00 kg per sqm using rubber brush after proper cleaning of the road surface and spreading of river sand @ 0.06 cum/10 sqm complete as per specification and direction of the Engg.-in-Charge. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender