|
| 1 | M&L PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregates) as in foundation, flooring, mass concrete including dismantling of existing flooring etc complete all as specified and directed. |
| 2 | M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as surface channels and drains complete all as specified and directed. |
| 3 | M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in base/anchoragefor fixing to trusses and the like, complete all as specified and directed. |
| 5 | M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed. |
| 6 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. |
| 7 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, complete all as specified and directed. |
| 8 | M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 9 | S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned andchemically pressure treated, complete all as specified and directed. |
| 10 | S&F 35mm thick factory made wire guazed and skeleton shutters (1st class softwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed. |
| 11 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as per specifications & drawing. |
| 12 | S&F Solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening at site, complete all as per specifications & drawing. |
| 13 | S&F \"as in repair\" factory made 18mm (+0.7mm) thick PVC sheet one side prelam for cupboard shutter of density 600 Kg/Cbm bent 90 degree and finish at all edges at level for making edge lipping/bending or 0.5mm thick PVC sheet lipping at 4 edges using bonding tape complete all as per manufacturers specifications |
| 14 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 15 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 16 | S&F \"as in repair\" 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | S&F \"as in repair\" 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 18 | S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 19 | S&F 100mm long butt hinges, type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 20 | S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 21 | S&F\"as in repair\" 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed. |
| 22 | S&F\"as in repair\"20mm bore mild steel drapery rod with 1.0mm thick PVC wood grain coating including brackets and knobs, fixed on windows and doors for hanging curtains, complete all as specified and directed. |
| 23 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 24 | S&F \"as in repair\" stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 25 | S&F \"as in repair\" anodised aluminium window and ventilator shutters, side hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos) and suitable handles as required, complete all as specified and directed. |
| 26 | S&F \"as in repair\" anodised aluminium door shutter, aluminium section weighing not less than 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 2 Nos handle150mm long and two Nos 150mm long aluminium tower bolts in each shutter, hinges, anonised aluminium snap beading, fixed with screws, complete all as specified and directed. |
| 27 | S&F\"as in repair\" anodised aluminium frame work for doors, window, ventilators, partition walls with one or more rebates including joining cleats for fixing etc, complete all as specified and directed. |
| 28 | S&F Box type steel windows and ventilators, comprised oftubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3. |
| 29 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 30 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 31 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shaperequired including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diacomplete all as specified and directed. |
| 32 | S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded ) upto 60mm bore conforming to I. S.1161-1979 grade St.-240 quality \"A\", including welding of distance pieces, cleats, special shaped washer etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed. |
| 33 | S&F steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n. exc. 30cm long, 16mm dia of shank, complete all as specified and directed. |
| 34 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 35 | M&L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa as in ridge/valley , gutter or straight flashings etc including dismantling of existing plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 36 | M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or colour) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 37 | M&L for removing existing roof treatment (any type) and roughening surfaces of old concrete floor by picking, sweeping/brushing clean and washing down with water to remove dust etc, and applying neat cement slurry with 3Kg of cement per Sqm complete all as specified and directed. |
| 38 | M&L for 20mm thick cement plaster on roof top in cement mortar 1:4 on concrete surfaces, finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed. |
| 39 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab/chajjas/canopy/parapet wall, to be executed through approved applicator of the membrane manufacturered as per following specifications, complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre/Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG/Litre at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap.(d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG/Sqm as prescribed by manufacturer of membrane.(e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4,type B-0. |
| 40 | M&L for 40mm thick fly ash brick tiles laid on 15mm thick cement plaster on roof top in cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane including dismantling of existing brick tiles, complete all as specified and directed. |
| 41 | M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, including demolition of existing floor complete all as specified and directed. |
| 42 | M&L for 40mmPCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors laid in panels n. exc. 2.5 Sqm with top finished the surface even and smooth without using extra cement including glass dividing strips as per site requirement complete all as specified and directed |
| 43 | M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed. |
| 44 | M&L for coloured machine pressed precast rubber moulded concrete interlocking (Grey/red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, and dismantling existing interlocking paver block of any shape and size removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 45 | M&L interlocking paver block of any shape of 60mm thickness, M-35 Grade, (EXCEPT BLOCKS) laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed. |
| 46 | M&L for Fly Ash glossy finished coloured chequered cement concrete tiles of size 30cm X 30cm X 25mm thick, set, jointed & pointed in neat cement slurry with grey cement and pigment to match as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, including dismantling existing floor, hearth or wall tiling of any description, complete all as specified and directed. |
| 47 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for layingfloor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 48 | M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for layingfloor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 49 | M&L for glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L for 10mm thick vitrified ceramic \"light shade\" colour tile (Square or Rectangular), polished, area of each tile not exc 0.36 Sqm (Joint free) as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 and finished rough, including dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 51 | M&L for marble work (Green / Black marble Bhaislana Zebra)18-20mm thick (table rubbed and polished) as in cooking plateform, window cills, jambs, steps and like over and including 15mm thick screed in CM 1:4 including pointing with white cement (1:2) using marble dust with admixture of pigment to match the marble shade including rounding the exposed edges full round, and making hole for gas pipe, including demolition of existing stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 52 | M&L for machine cut kota stone slab flooring/ treads of steps 18-20mm thick over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in floors / cills etc, and moulding at edges if required complete all as specified and directed. |
| 53 | M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 54 | M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 55 | M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed. |
| 56 | M&L for preparation of old surfaces of ceiling including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying two coats of white wash, complete all as specified and directed. |
| 57 | M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and applying 2mm thick wall care putty for making the surfaces smooth and applying two coats of oil emulsion distemper, complete all as specified and directed. |
| 58 | M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed. |
| 59 | M&L for preparation of old surfaces of walls of any description after complete removal of existing treatment and making the surfaces smooth and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed. |
| 60 | M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed. |
| 61 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips, complete all as specified and directed. |
| 62 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 63 | S&F 3mm thick Figured glass, pin head type in square not exc 0.50 Sqm each pane, fixed with oil putty, complete all as specified and directed. |
| 64 | M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 65 | M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 66 | M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed. |
| 67 | S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed. |
| 68 | M&L for 15mm bore water tubes \"medium grade\" galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 69 | M&L for 20mm bore water tubes \"medium grade\" galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 70 | S&F \"as in repair\"15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed. |
| 71 | S&F \"as in repair\"15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed. |
| 72 | S&F\"as in repair\"15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 73 | S&F\"as in repair\" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 74 | S&F\"as in repair\"chromium plated tubular towel rail, 20mm dia \"D\" type, 60cm long between flanges, complete all as specified and directed. |
| 75 | S&F \"as in repair\"CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed. |
| 76 | S&F \"as in repair\" Jet Spray (with 1.50 Mtr PVC tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed. |
| 77 | S&F \"as in repair\" health foucet (with 1.5mtr long PVC tube) fixed to angular stop cock and complete wall hanging arrangement, complete all as specified and directed. |
| 78 | S&F \"as in repair\" bevelled edge mirror of size 600mm x 450mm of selected quality, 5mm thick glass with PVC frame with PVC beading, fixed with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 79 | S&F \"as in repair\" LDPE waste pipe, 32mm dia suitable for WHB / Sink including threaded PVC socket suitable for shank of waste coupling, complete all as specified and directed. |
| 80 | S&F \"as in repair\" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 81 | S&F \"as in repair\" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed. |
| 82 | S&F \"as in repair\" plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and directed. |
| 83 | S&F \"as in repair\" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed. |
| 84 | S&F \"as in repair\" syphonic action kit for PVC flushing cistern of 10 Ltrs capacity, complete all as specified and directed. |
| 85 | S&F\"as in repair\"Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed. |
| 86 | S&F \"as in repair\" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed. |
| 87 | S&F \"as in repair\" Vitreous china squatting pan of \"Orissa pattern\" of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed. |
| 88 | S&F\"as in repair\" kitchen plate rack made of stainless steel 1mm thick, fixed on wall with plugs, mild steel screws overall size 750mm x 900mm size complete all as specified & directed. |
| 89 | S&F\"as in repair\" sink with drainage board made of stainless steel 1mm thick, fixed with plugs, washers including PVC waste pipe, waste couplingincluding bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting to union pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified & directed. |
| 90 | S&F \"as in repair\" stainless steel Grating doom 100mm dia, fixed in floors complete all as specified and directed. |
| 91 | S&F \"as in repair\" stainless steel Grating doom 100mm dia with waste hole, fixed in floors complete all as specified and directed. |
| 92 | S&F \"as in repair\" 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors/ walls, complete all as specified and directed. |
| 93 | S&F \"as in repair\" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid or fixed in trenches / floors/ walls, complete all as specified and directed. |
| 94 | S&F \"as in repair\" 75mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 95 | S&F \"as in repair\" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed. |
| 96 | S&F \"as in repair\" 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 97 | Cleaning and removing all scale and dirt etc. from water tank and from mouths of circulating pipes without disconnecting tank of capacity exc 500 Ltrs but not exc 1000 Ltrs, complete all as specified and directed. |
| 98 | Cleaning and removing all inaccessible roof and wall vegitation and plants after cutting & removing from roots and removing the same out of MoD land complete all as specified and directed. |
| 99 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 100 | Demolition of stone set paving of any description laid, bedded in any mortar complete all as specified and directed. |
| 101 | Taking down chowkhats or framesexc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed. |
| 102 | Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed. |
| 103 | Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed. |
| 104 | Dismantling timber scantling 40 Sqm and over in section in unframed work etc complete all as specified and directed. |
| 105 | Taking down roof trusses, coupled rafters or trussed beams, above 4m but n. exc. 8m length clear span complete all as specified and directed. |
