Heavy Industries and Public Enterprises Boards / Undertakings / PSU Closing in 0 days TDR #33625231

Medicine For Csr Health Camp Medicine For Csr Health Camp , Amc Mechanical Maintenance Work , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Replacement Of Gaskets Per Flange Joint / S

Issued by Boards / Undertakings / PSU · matikhalo, Odisha
Tender Value
3.99 Lakhs
Estimated cost
Bid Submission
29 Aug 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
matikhalo → Odisha
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Medicine For Csr Health Camp Medicine For Csr Health Camp , Amc Mechanical Maintenance Work , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Opening And Fitting Of Manhole Covers Of Different Tanks As Per The Scope Of The Work, Replacing With New Gaskets If Required. ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Opening And Fitting Of Manhole Covers Of Different Tanks As Per The Scope Of The Work, Replacing With New Gaskets If Required. ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Ms / Cs Pipes 15-40 Nb As Per Technical Specification , Ms / Cs Pipes 50-100Nbas Per Technical Specification , Ms / Cs Pipes 125-200&Above 200Nbas Per Technical Specification , Ss Pipes 15-40 Nb As Per Technical Specification , Ss Pipes 50-100Nbas Per Technical Specification , Ss Pipes 125-200As Per Technical Specification , Hdpe Pipes 25-50 Mm As Per Technical Specification , Hdpe Pipes 63-90 Mm As Per Technical Specification , Hdpe Pipes 110 / Above 110Mm As Per Technical Specification , Ms / Cs As Per Technical Specification , Ss As Per Technical Specification , Hdpe Pipes 25-50 Mm As Per Technical Specification , Hdpe Pipes 63-90 Mm As Per Technical Specification , Hdpe Pipes 110 / Above 110 Mm As Per Technical Specification , Welding Of Various Ducts, Plates, Chequered Sheet And Miscellaneous Equipments Of Ms Where Damaged Portion Is To Be Cut, Repaired Or Re Welded. The Scrap Generated Has To Be Shifted To Scrap Yard. ( Welding Electrode And Machines To Be Arranged By The Party. ) , Welding Of Various Ducts, Plates, Chequered Sheet And Miscellaneous Equipments Ofsswhere Damaged Portion Is To Be Cut, Repaired Or Re Welded. The Scrap Generated Has To Be Shifted To Scrap Yard ( Welding Electrode And Machines To Be Arranged By The Party. ) , Dismantling Of Various Ducts, Plates, Chequered Sheet, Old Equipments, Tanks, Structural, Miscellaneous Items Etc Which Do Not Require Refitting. , Fabrication And Erection Of Structural Steel, Pipe Lines Supports, Foundations Of Equipments, Tanks Etc In Relating To Maintenance Worksand Other Miscellaneous Equipments. ( If Only Fabrication Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Preventive Maintenance & Conditioning Monitoring Of All Mechanical Equipments As Per Schedule Which Will Be Provided By Eic / Area In-Charges. Thisincludesonsite Fan Impeller Cleaning, Oil Top-Up / Replacement, Greasing, Foundation / Body / Agitator / Coupling Nut- Bolts Tightening / Replacement, Balancing, Alignment, Cleaning, Gland Checking / Changing If Damaged / Coupling- Spider Checking Etc. ( For 8 Hrs Per Day ) As Per Technical Specification , Any Miscellaneous Jobs During The A, B &C-Shift Which Do Not Fit To The All Given Items In Schedule Of Rates Like Freeing Of Pumps / Gear Boxes / Shaft / Agitator / Any Type Equipments / Conveyors Using Pipe Wrench Or Required Tools On Site, Tighteningof Gland Or Mechanical Seal As Per Technical Specification , Metallic Horizontal Centrifugal Pump Up To Suction-75Xdischage-50 ( Without Motor ) / Mono-Block Horizontal Centrifugal Pump Including Motor. , Metallic Horizontal Centrifugal Pump Above Suction-75Xdischage-50 ( Without Motor ) , Metallic Vertical Submersible Centrifugal Pump Upto 65Vdh Or Lvp-80 Or Equivalent Including Motor / Vertical Multistage Centrifugal Pump Including Motor , Non-Metallic Horizontal Centrifugal Pumps / Aod Pump , Non-Metallic Vertical Submersible Centrifugal Pump Including Motor / Vertical Glandless Pump Including Motor , Metering Pumps Of Any Size , Ods Pump Sizes 4 Inch , Replacement Of Diaphragm Of Ods Size 4 Inch Pumps. , Vacuum Pumpcapacity 340M3 / Hr , Motor / Geared Motor From 0.5 Hp To 10Hp. , Motors / Geared Motor More Than 10 Hp To 24Hp . , Motors More Than 24 Hp To 60Hp , Motors More Than 60Hp To 120 Hp , Gear Box A-237, A-287, A-337 / U-400, 500, 600 / V-400, 500, 600. , Gear Box V-800, 1000, 1200 , Stirrer / Agitator System Below 5M3 Tanks Includes Agitator, Motor, Cover Plates Gear Box Etc , Agitator System Of 5M3 - 18 M3 Tanks Includes Agitator, Cover Plate, Plate Connected All Type Joints With Gasket, Motor, Gear Box, Stool, Stub Shaft Etc , Agitator System 30M3 - 60 M3 Tanksincludes Agitator, Cover Plate, Plate Connected All Type Joints With Gasket, Motor, Gear Box, Stool, Stub Shaft Etc , Agitator ( Only ) In 5 M3 -18 M3 Tanks , Agitator ( Only ) In 30 M3- 60 M3 Tanks , Stub Shaft Assemblyon 5M3 - 18 M3 Tanks ( Including Gear Box, Motor, Clamping Of Agitator Etc ) , Stub Shaft Assemblyon30 M3 –60 M3 Tanks ( Including Gear Box, Motor, Clamping Of Agitator Etc ) , Filter Press Plates Of Size 1500 Mm X 1500 Mm. , Hydraulic Cylinder Of Filter Press Size 1500 Mm X 1500 Mm , Hydraulic Cylinder Of Filter Press Size 1000 Mm X 1000 Mm , Bomb Door Of Filter Press Size 1500 Mm X 1500 Mm. , Bomb Door Cylinder Of Filter Press Size 1500 Mm X 1500 Mm. , Bomb Door Cylinder Clamp Of Filter Press Size 1500 Mm X 1500 Mm. , Hydraulic Power Pack Assembly Of Filter Press Size 1500 Mm X 1500 Mm ( Including All Accessories, Motors Etc. ) , Hydraulic Power Pack Assembly Of Filter Press Size 1000 Mm X 1000 Mm. ( Including All Accessories, Motors Etc. ) , Filter Bag / Cage Replacement , Boiler Furnace Air Nozzle Replacement , Cover Of Any Thickness With Packing ( Cover Perimeter ) , Screen Cloth Replacement Work Of Vibrating Screen Of Length 2 Meters In Boiler ( Cpp ) ( Includes Rubber Packing Gas Heating, Cutting And Welding ) . , Impact Crusher 1000 X 800 Hammer Bar Replacement Work , Tail Drum / Head Drum Of Upto 600Mm Belt Conveyor / 200 Mm Bucket Elevator Belt , Plumber / Pillow Block With Bearing Of Any Size Replacement , Damaged Coupling With Spider Sizel-90 - L-226 Or Pulley / Sprocket Of Any Size Replacement Work. ( This Includes Motor Adjustment / Re-Alignment, Removal / Fixing Coupling Guard ) , Any Size Electrical Chain Block / Wire Rope Hoist With Motor Replacement Work , Air Compressor Model Lr 90I / Kes 75 Air Cooler / Oil Cooler / Air Compressor Blower , Screw Air End Of Air Compressor Model Lr 90I / Kes 75 , Centrifuge / Decanter Replacement Work ( Including All The Connected Equipment And Pipe Lines ) , Id / Fd / Sa / Blower / Scrubber Fan Including Impeller With Shaft, Casing, Suction & Discharge Connection With Gasketof Any Size , Dense Phase System Dome Replacement Work ( Including Seal, Any Type Ring, Gasket, Body & Plates ) / Pneumatic Cylinder Of Any Size Of Boiler , V-Belt / Chain Replacement Work , Flaker Machine Blade Replacement Work , Overhauling Of Pumps I.E. Metallic Horizontal Centrifugal Pump / Reciprocating Pump Upto Suction-75Xdischage-50 / Metering Pump , Overhauling Of Pumps I.E. Metallic Horizontal Centrifugal Pump Above Suction-75Xdischage-50 / Vacuum Pump Of Any Size , Overhauling Of Pumps I.E. Monoblock Horizontal Centrifugal Pump / Hydraulic Pumps ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Metallic Vertical Submersible Centrifugal Pump / Vertical Multistage Centrifugal Pump ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Non-Metallic Horizontal Centrifugal Pumps / Aod Pumps Of Any Size / Ods Pumps Size 4 Inch. , Overhauling Of Non-Metallic Vertical Submersible Centrifugal Pump / Vertical Glandless Pump ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Gear Box U-500, 600, 800 / V-500, 600, 800, A237, A287, A337, U-400 / V-400, Geared Motor / Hoist Of Any Size , Overhauling Of Gear Box V-1000, 1200 , Overhauling Of Crusher / Vibrating Screen ( Including Replacement Of All Spares Liner Plates, Hammer Bar, Seals, Rings, Screen, Pulley, Shaft, Body Packings, Bearings Plumber Block With New Or Existing As Per Instructions Of Eic / Raea Maint. Incharge ) . , Overhauling Of Any Size, Any Type Of Valves / Nrv / Rotary Union, Repair Of Chain. , Overhauling Of Stub Shaft Of Any Size , Overhauling Of Main Hydraulic Cylinder Of Filter Press 1500 X 1500 , Overhauling Of Main Hydraulic Cylinder Of Filter Press 1000 X 1000 Or Boom Door Cylinder Of Filter 1500 X 1500 Press , Supporting ( Two Person ) For Overhauling Of Centrifuge / Compressor / Hydraulic Cylinder / Screw Conveyor Of Any Size With Service Engineer Or Irel Staff => Limited

BOQ

Name of Work:
Sl. No. Item Description
1AMC Mechanical Maintenance work
2Replacement of gaskets per flange joint / spade flange joint at all elevations as per the scope of the work.
3Replacement of gaskets per flange joint / spade flange joint at all elevations as per the scope of the work.
4Replacement of gaskets per flange joint / spade flange joint at all elevations as per the scope of the work.
5Opening and fitting of manhole covers of different tanks as per the scope of the work, replacing with new gaskets if required. (If only dismantling or only erection is there, only half the amount will be sanctioned.)
6Opening and fitting of manhole covers of different tanks as per the scope of the work, replacing with new gaskets if required. (If only dismantling or only erection is there, only half the amount will be sanctioned.)
7Dismantling& Erection of Metallic valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
8Dismantling& Erection of Metallic valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
9Dismantling& Erection of Metallic valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
10Dismantling& Erection of Non Metallic Valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
11Dismantling& Erection of Non Metallic Valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
12Dismantling& Erection of Non Metallic Valves / NRV / foot valves at all elevations as per the scope of work with gasket(If only dismantling or only erection is there, only half the amount will be sanctioned.)
13MS/CS PIPES 15-40 NB as per technical specification
14MS/CS PIPES 50-100NBas per technical specification
15MS/CS PIPES 125-200&Above 200NBas per technicalspecification
16SS pipes 15-40 NB as per technical specification
17SS pipes 50-100NBas per technical specification
18SS pipes 125-200as per technical specification
19HDPE pipes 25-50 mm as per technical specification
20HDPE pipes 63-90 mm as per technical specification
21HDPE pipes 110/Above 110mm as per technical specification
22MS/CS as per technical specification
23SS as per technical specification
24HDPE pipes 25-50 mm as per technical specification
25HDPE pipes 63-90 mm as per technical specification
26HDPE pipes 110/Above 110 mm as per technical specification
27Welding of various ducts, plates, chequered sheet and miscellaneous equipments of MS where damaged portion is to be cut,repaired or re welded. The scrap generated has to be shifted to scrap yard.(Welding electrode and machines to be arranged by the party.)
28Welding of various ducts, plates, chequered sheet and miscellaneous equipments ofSSwhere damaged portion is to be cut, repaired or re welded. The scrap generated has to be shifted to scrap yard (Welding electrode and machines to be arranged by the party.)
29Dismantling of various ducts, plates, chequered sheet, old equipments, tanks, structural, miscellaneous items etc which do not require refitting.
30Fabrication and erection of structural steel, pipe lines supports, foundations of equipments,tanks etc in relating to maintenance worksand other miscellaneous equipments. (If only fabrication or only erection is there, only half the amount will be sanctioned.)
31Preventive maintenance & conditioning monitoring of all mechanical equipments as per schedule which will be provided by EIC/ area in-charges. Thisincludesonsite fan impeller cleaning,oil top-up/ replacement, Greasing, foundation/body/agitator/coupling nut- bolts tightening/replacement, balancing, alignment, cleaning,gland checking/changing if damaged/ coupling- spider checking etc.(for 8 Hrs per day) as per technical specification
32Any miscellaneous jobs during the A, B &C-shift which do not fit to the all given items in schedule of rates like freeing of Pumps/Gear boxes /shaft/agitator/any type equipments/conveyors using pipe wrench or required tools on site, tighteningof gland or mechanical seal as per technical specification
33Metallic horizontal centrifugal pump up to suction-75xdischage-50(without motor) / Mono-block horizontal centrifugal pump including motor.
34Metallic horizontal centrifugal pump above suction-75xdischage-50 (without motor)
35Metallic vertical submersible centrifugal pump upto 65VDH or LVP-80 or equivalent including motor/ Vertical multistage centrifugal pump including motor
36Non-Metallic horizontal centrifugal pumps /AOD pump
37Non-metallic vertical submersible centrifugal pump including motor/vertical glandless pump including motor
38Metering pumps of any size
39ODS pump sizes 4 inch
40Replacement of diaphragm of ODS size 4 inch pumps.
41Vacuum pumpcapacity 340m3/hr
42Motor/Geared Motor from 0.5 HP to 10HP.
43Motors/Geared Motor More than 10 HP to 24HP .
44Motors More than 24 HP to 60HP
45Motors More than 60HP to 120 HP
46Gear box A-237,A-287,A-337/U-400,500,600/ V-400,500,600.
47Gear box V-800,1000,1200
48Stirrer/Agitator System below 5m3 tanks includes agitator, motor, cover plates gear box etc
49Agitator System of 5m3 - 18 m3 tanks includes agitator, cover plate, Plate connected all type joints with gasket, motor, gear box, stool, stub shaft etc
50Agitator System 30m3 - 60 m3 tanksincludes agitator, cover plate, Plate connected all type joints with gasket, motor, gear box, stool, stub shaft etc
51Agitator (only) in 5 m3 -18 m3 tanks
52Agitator(only) in 30 m3- 60 m3 tanks
53Stub shaft assemblyon 5m3 - 18 m3 tanks(Including gear box, motor, clamping of agitator etc)
54Stub shaft assemblyon30 m3 –60 m3 tanks(Including gear box, motor, clamping of agitator etc)
55Filter press plates of Size 1500 mm x 1500 mm.
56Hydraulic cylinder of Filter press size 1500 mm x 1500 mm
57Hydraulic cylinder of Filter press size 1000 mm x 1000 mm
58Bomb door of Filter press size 1500 mm x 1500 mm.
59Bomb door cylinder of Filter press size 1500 mm x 1500 mm.
60Bomb door cylinder Clamp of Filter press size 1500 mm x 1500 mm.
61Hydraulic Power Pack Assembly of Filter press size 1500 mm x 1500 mm ( including all accessories, motors etc.)
62Hydraulic Power Pack assembly of Filter press size 1000 mm x 1000 mm. ( including all accessories, motors etc.)
63Filter bag/cage replacement
64Boiler furnace air nozzle replacement
65Cover of any thickness with packing (Cover perimeter )
66Screen Cloth replacement work of vibrating screen of length 2 meters in Boiler (CPP) (includes rubber packing gas heating, cutting and welding).
67Impact Crusher 1000 X 800 Hammer bar Replacement work
68Tail drum/ Head Drum of upto 600mm belt conveyor/ 200 mm bucket elevator belt
69Plumber/pillow Block with bearing of any size replacement
70Damaged Coupling with spider SizeL-90 - L-226 or pulley/sprocket of any size replacement work. (This includes motor adjustment/re-alignment,removal/fixing Coupling Guard)
71Any size electrical chain block / wire rope hoist with motor replacement work
72Air Compressor Model lR 90i / KES 75 air cooler/ oil cooler / Air Compressor blower
73Screw Air end of air compressor model lR 90i / KES 75
74Centrifuge/decanter replacement work (including All the connected equipment and pipe lines )
75ID/FD/SA/Blower/Scrubber Fan including impeller with shaft, casing, suction & discharge connection with gasketof any size
76Dense phase system dome replacement work (including seal, any type ring, gasket, body & plates)/Pneumatic cylinder of any size of boiler
77V-belt/chain replacement work
78Flaker Machine Blade replacement work
79Overhauling of Pumps i.e. Metallic horizontal centrifugal pump/ Reciprocating pump upto suction-75xdischage-50 /Metering pump
80Overhauling of Pumps i.e. Metallic horizontal centrifugal pump above suction-75xdischage-50/Vacuum pump of any size
81Overhauling of Pumps i.e. Monoblock horizontal centrifugal pump/ Hydraulic pumps ( including dis-assembly/re-assembly of motor of any size)
82Overhauling of Metallic vertical submersible centrifugal pump/ Vertical multistage centrifugal pump (including dis-assembly/re-assembly of motor of any size)
83Overhauling of Non-Metallic horizontal centrifugal pumps /AOD pumps of any size/ODS pumps size 4 inch.
84Overhauling of Non-metallic vertical submersible centrifugal pump/vertical glandless pump (including dis-assembly/re-assembly of motor of any size)
85Overhauling of Gear box U-500,600,800/V-500,600,800, A237, A287, A337,U-400/V-400, geared motor/hoist of any size
86Overhauling of Gear box V-1000, 1200
87Overhauling of crusher/vibrating screen (Including replacement of all spares liner plates, Hammer bar, seals, rings, screen, Pulley, shaft, body packings, bearings plumber block with new or existing as per instructions of EIC/ raea maint. incharge).
88Overhauling of any size, any type of Valves/ NRV/Rotary union, Repair of chain.
89Overhauling of stub shaft of any size
90Overhauling of main hydraulic cylinder of Filter press 1500 x 1500
91Overhauling of main hydraulic cylinder of Filter press 1000 x 1000 or boom door cylinder of filter 1500 x 1500 press
92Supporting (two person) for Overhauling of centrifuge /compressor/ hydraulic cylinder / screw conveyor of any size with service engineer or IREL Staff

AI Tender Summary

OUR REF NO 33625231
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 3.99 Lakhs
LAST DATE 29-08-2022
Authority
Authority Name Indian Rare Earths Limited
Work Description Medicine For Csr Health Camp Medicine For Csr Health Camp , Amc Mechanical Maintenance Work , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Replacement Of Gaskets Per Flange Joint / Spade Flange Joint At All Elevations As Per The Scope Of The Work. , Opening And Fitting Of Manhole Covers Of Different Tanks As Per The Scope Of The Work, Replacing With New Gaskets If Required. ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Opening And Fitting Of Manhole Covers Of Different Tanks As Per The Scope Of The Work, Replacing With New Gaskets If Required. ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Dismantling& Erection Of Non Metallic Valves / Nrv / Foot Valves At All Elevations As Per The Scope Of Work With Gasket ( If Only Dismantling Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Ms / Cs Pipes 15-40 Nb As Per Technical Specification , Ms / Cs Pipes 50-100Nbas Per Technical Specification , Ms / Cs Pipes 125-200&Above 200Nbas Per Technical Specification , Ss Pipes 15-40 Nb As Per Technical Specification , Ss Pipes 50-100Nbas Per Technical Specification , Ss Pipes 125-200As Per Technical Specification , Hdpe Pipes 25-50 Mm As Per Technical Specification , Hdpe Pipes 63-90 Mm As Per Technical Specification , Hdpe Pipes 110 / Above 110Mm As Per Technical Specification , Ms / Cs As Per Technical Specification , Ss As Per Technical Specification , Hdpe Pipes 25-50 Mm As Per Technical Specification , Hdpe Pipes 63-90 Mm As Per Technical Specification , Hdpe Pipes 110 / Above 110 Mm As Per Technical Specification , Welding Of Various Ducts, Plates, Chequered Sheet And Miscellaneous Equipments Of Ms Where Damaged Portion Is To Be Cut, Repaired Or Re Welded. The Scrap Generated Has To Be Shifted To Scrap Yard. ( Welding Electrode And Machines To Be Arranged By The Party. ) , Welding Of Various Ducts, Plates, Chequered Sheet And Miscellaneous Equipments Ofsswhere Damaged Portion Is To Be Cut, Repaired Or Re Welded. The Scrap Generated Has To Be Shifted To Scrap Yard ( Welding Electrode And Machines To Be Arranged By The Party. ) , Dismantling Of Various Ducts, Plates, Chequered Sheet, Old Equipments, Tanks, Structural, Miscellaneous Items Etc Which Do Not Require Refitting. , Fabrication And Erection Of Structural Steel, Pipe Lines Supports, Foundations Of Equipments, Tanks Etc In Relating To Maintenance Worksand Other Miscellaneous Equipments. ( If Only Fabrication Or Only Erection Is There, Only Half The Amount Will Be Sanctioned. ) , Preventive Maintenance & Conditioning Monitoring Of All Mechanical Equipments As Per Schedule Which Will Be Provided By Eic / Area In-Charges. Thisincludesonsite Fan Impeller Cleaning, Oil Top-Up / Replacement, Greasing, Foundation / Body / Agitator / Coupling Nut- Bolts Tightening / Replacement, Balancing, Alignment, Cleaning, Gland Checking / Changing If Damaged / Coupling- Spider Checking Etc. ( For 8 Hrs Per Day ) As Per Technical Specification , Any Miscellaneous Jobs During The A, B &C-Shift Which Do Not Fit To The All Given Items In Schedule Of Rates Like Freeing Of Pumps / Gear Boxes / Shaft / Agitator / Any Type Equipments / Conveyors Using Pipe Wrench Or Required Tools On Site, Tighteningof Gland Or Mechanical Seal As Per Technical Specification , Metallic Horizontal Centrifugal Pump Up To Suction-75Xdischage-50 ( Without Motor ) / Mono-Block Horizontal Centrifugal Pump Including Motor. , Metallic Horizontal Centrifugal Pump Above Suction-75Xdischage-50 ( Without Motor ) , Metallic Vertical Submersible Centrifugal Pump Upto 65Vdh Or Lvp-80 Or Equivalent Including Motor / Vertical Multistage Centrifugal Pump Including Motor , Non-Metallic Horizontal Centrifugal Pumps / Aod Pump , Non-Metallic Vertical Submersible Centrifugal Pump Including Motor / Vertical Glandless Pump Including Motor , Metering Pumps Of Any Size , Ods Pump Sizes 4 Inch , Replacement Of Diaphragm Of Ods Size 4 Inch Pumps. , Vacuum Pumpcapacity 340M3 / Hr , Motor / Geared Motor From 0.5 Hp To 10Hp. , Motors / Geared Motor More Than 10 Hp To 24Hp . , Motors More Than 24 Hp To 60Hp , Motors More Than 60Hp To 120 Hp , Gear Box A-237, A-287, A-337 / U-400, 500, 600 / V-400, 500, 600. , Gear Box V-800, 1000, 1200 , Stirrer / Agitator System Below 5M3 Tanks Includes Agitator, Motor, Cover Plates Gear Box Etc , Agitator System Of 5M3 - 18 M3 Tanks Includes Agitator, Cover Plate, Plate Connected All Type Joints With Gasket, Motor, Gear Box, Stool, Stub Shaft Etc , Agitator System 30M3 - 60 M3 Tanksincludes Agitator, Cover Plate, Plate Connected All Type Joints With Gasket, Motor, Gear Box, Stool, Stub Shaft Etc , Agitator ( Only ) In 5 M3 -18 M3 Tanks , Agitator ( Only ) In 30 M3- 60 M3 Tanks , Stub Shaft Assemblyon 5M3 - 18 M3 Tanks ( Including Gear Box, Motor, Clamping Of Agitator Etc ) , Stub Shaft Assemblyon30 M3 –60 M3 Tanks ( Including Gear Box, Motor, Clamping Of Agitator Etc ) , Filter Press Plates Of Size 1500 Mm X 1500 Mm. , Hydraulic Cylinder Of Filter Press Size 1500 Mm X 1500 Mm , Hydraulic Cylinder Of Filter Press Size 1000 Mm X 1000 Mm , Bomb Door Of Filter Press Size 1500 Mm X 1500 Mm. , Bomb Door Cylinder Of Filter Press Size 1500 Mm X 1500 Mm. , Bomb Door Cylinder Clamp Of Filter Press Size 1500 Mm X 1500 Mm. , Hydraulic Power Pack Assembly Of Filter Press Size 1500 Mm X 1500 Mm ( Including All Accessories, Motors Etc. ) , Hydraulic Power Pack Assembly Of Filter Press Size 1000 Mm X 1000 Mm. ( Including All Accessories, Motors Etc. ) , Filter Bag / Cage Replacement , Boiler Furnace Air Nozzle Replacement , Cover Of Any Thickness With Packing ( Cover Perimeter ) , Screen Cloth Replacement Work Of Vibrating Screen Of Length 2 Meters In Boiler ( Cpp ) ( Includes Rubber Packing Gas Heating, Cutting And Welding ) . , Impact Crusher 1000 X 800 Hammer Bar Replacement Work , Tail Drum / Head Drum Of Upto 600Mm Belt Conveyor / 200 Mm Bucket Elevator Belt , Plumber / Pillow Block With Bearing Of Any Size Replacement , Damaged Coupling With Spider Sizel-90 - L-226 Or Pulley / Sprocket Of Any Size Replacement Work. ( This Includes Motor Adjustment / Re-Alignment, Removal / Fixing Coupling Guard ) , Any Size Electrical Chain Block / Wire Rope Hoist With Motor Replacement Work , Air Compressor Model Lr 90I / Kes 75 Air Cooler / Oil Cooler / Air Compressor Blower , Screw Air End Of Air Compressor Model Lr 90I / Kes 75 , Centrifuge / Decanter Replacement Work ( Including All The Connected Equipment And Pipe Lines ) , Id / Fd / Sa / Blower / Scrubber Fan Including Impeller With Shaft, Casing, Suction & Discharge Connection With Gasketof Any Size , Dense Phase System Dome Replacement Work ( Including Seal, Any Type Ring, Gasket, Body & Plates ) / Pneumatic Cylinder Of Any Size Of Boiler , V-Belt / Chain Replacement Work , Flaker Machine Blade Replacement Work , Overhauling Of Pumps I.E. Metallic Horizontal Centrifugal Pump / Reciprocating Pump Upto Suction-75Xdischage-50 / Metering Pump , Overhauling Of Pumps I.E. Metallic Horizontal Centrifugal Pump Above Suction-75Xdischage-50 / Vacuum Pump Of Any Size , Overhauling Of Pumps I.E. Monoblock Horizontal Centrifugal Pump / Hydraulic Pumps ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Metallic Vertical Submersible Centrifugal Pump / Vertical Multistage Centrifugal Pump ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Non-Metallic Horizontal Centrifugal Pumps / Aod Pumps Of Any Size / Ods Pumps Size 4 Inch. , Overhauling Of Non-Metallic Vertical Submersible Centrifugal Pump / Vertical Glandless Pump ( Including Dis-Assembly / Re-Assembly Of Motor Of Any Size ) , Overhauling Of Gear Box U-500, 600, 800 / V-500, 600, 800, A237, A287, A337, U-400 / V-400, Geared Motor / Hoist Of Any Size , Overhauling Of Gear Box V-1000, 1200 , Overhauling Of Crusher / Vibrating Screen ( Including Replacement Of All Spares Liner Plates, Hammer Bar, Seals, Rings, Screen, Pulley, Shaft, Body Packings, Bearings Plumber Block With New Or Existing As Per Instructions Of Eic / Raea Maint. Incharge ) . , Overhauling Of Any Size, Any Type Of Valves / Nrv / Rotary Union, Repair Of Chain. , Overhauling Of Stub Shaft Of Any Size , Overhauling Of Main Hydraulic Cylinder Of Filter Press 1500 X 1500 , Overhauling Of Main Hydraulic Cylinder Of Filter Press 1000 X 1000 Or Boom Door Cylinder Of Filter 1500 X 1500 Press , Supporting ( Two Person ) For Overhauling Of Centrifuge / Compressor / Hydraulic Cylinder / Screw Conveyor Of Any Size With Service Engineer Or Irel Staff => Limited
Basic Detail
Tender No 22-18425
Bidding Type Tender
Location
City matikhalo
State Odisha
Key Dates
Publish Date 23 Aug 2022
Submission Date 29 Aug 2022
Open Date 30 Aug 2022
Finance
Tender Value 3.99 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
133479b1-d634-4216-a1aa-8cde8090c90c.html
BOQ_138136.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 23, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 29, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 30, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

133479b1-d634-4216-a1aa-8cde8090c90c.html

xls

BOQ_138136.xls

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders