Addn Altn And Special Repairs Of Stillwell Auditorium At Lekhapani Mil Stn Under Ge Lekhapani
Tender Value
1.14 Crore
Estimated cost
Bid Submission
22 Sep 2022
0 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
lekhapani → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addn Altn And Special Repairs Of Stillwell Auditorium At Lekhapani Mil Stn Under Ge Lekhapani
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Aug-2022 | DRTEXTENDED | Date | 09-Sep-2022 |
| 2 | 30-Aug-2022 | REVISED BOQ | BOQ | 09-Sep-2022 |
| 3 | 07-Sep-2022 | DRT EXTENDED2 | Date | 15-Sep-2022 |
| 4 | 15-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-Sep-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement(corrugated, semi corrugated etc.) sheet in roof coverings. |
| 2 | Dismantling of cast iron work of any description not otherwise described into primary parts. |
| 3 | Dismantling timber scantlings in framed works, 40 sqcm and over in section, in any position |
| 4 | Dismantling of wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness including cover fillets of any description including all snap grids and hanging arrangements complete all as specified. |
| 5 | Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc.complete as specified and directed |
| 6 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed. |
| 7 | Taking downskirting/dado as in cement plaster or terrazzo on brick wall including raking out joint, hacking for key, scrubbing down with water and making good the adjoining disturbed area in CM 1:4 etc complete all as specified and as directed. |
| 8 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) as in screed bed of wall tiles complete all as specified and directed. |
| 9 | S&F glazed ceramic coloured tiles in vertical surface 300x600x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. |
| 10 | S&F glazed ceramic coloured designer and highlighter tiles in vertical surface 300x600x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as directed. |
| 11 | M&L non-skid colour joint free ceramic tiles 7 to 8 mm thick (square/rectangular) size 300mm x 300mm, in floors etc over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 12 | M&L non-skid colour joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 13 | M&L non-skid colour joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, over and including screed bed or bedding layer of mortar but invertical surfaces such as skirting etc and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L double charged Vitrified coloured ceramic tiles 8 to 10 mm thick (square/ rectangular) polished,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 15 | M&L double charged Vitrified coloured ceramic tiles 8 to 10 mm thick(square/ rectangular) polished,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchin floors etc and including 10mm thick renderingin cement mortar 1:4 for vertical surfaces such as skirting etc complete all as specified & directed. |
| 16 | M&L for 300mm x 300mm heavy duty out door ceramic tiles 9 to 10mm thick (Capsule , Star or coin Pattern) in floors etc over and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith and including levelling course of 25 mm thick PCC 1:2:4 type B-0complete all as specified and directed. |
| 17 | Taking up or down 15 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified. |
| 18 | Taking up or down 20 mm bore of steel tubing and connections, including cleaning for refixing or removal to store or taken on schedule of credit complete all as specified. |
| 19 | Cutting chases in brick walls to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., not exceeding 10 cm girth and making good the same with cement concrete M15 (Nominal Mix) using 12.5 mm nominal size coarse aggregate or cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 complete all as specified and as directed. |
| 20 | Supplying & fixing to walls and ceilings or laid in floors 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. Note- The cost of cutting chasing for concealing water tubing shall deems to be included in the rate quoted by the contractor under tiles etc and as directed by Engr-in-Charge. |
| 21 | Refixing 15 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed. Note- The cost of cutting chasing for concealing water tubing shall deems to be included in the rate quoted by the contractor under tiles etc and as directed by Engr-in-Charge. |
| 22 | Supplying & fixing to walls and ceilings or laid in floors 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. Note- The cost of cutting chasing for concealing water tubing shall deems to be included in the rate quoted by the contractor under tiles etc and as directed by Engr-in-Charge. |
| 23 | Refixing 20 mm bore of steel tubing and connections in new or old positions (walls, ceilings, floors, etc.) complete all as specified and as directed. Note- The cost of cutting chasing for concealing water tubing shall deems to be included in the rate quoted by the contractor under tiles etc and as directed by Engr-in-Charge. |
| 24 | S & F, in repair, 15 mm nominal size, long body fancy chromium plated bib taps as per IS 8931: 1993 with cruch and buttefly handle, screwed down, fixed to iron pipe in repairs. Cat Part No G2304A1 of Parryware or equivalent as given in Appx Bcomplete all as specified and as directed. |
| 25 | S & F, in repair, 15 mm nominal size, pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut, with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish, Cat Part No T3802A1 of Parryware or equivalent as given in Appx B, complete all as specified and as directed. |
| 26 | S & F in repairs vitreous china squatting pan, \"Orissa\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S\" trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S & F in repairs Single piece vitreous China suite European water closet and seat cover as per Model No. C8906 of Parryware or equivalent of Make as mentioned under Appendix \"B\" complete all as specified and as directed. |
| 28 | S & F wash basins, in repair, vitreous china, white, flat back, size 630 mm X 450 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. |
| 29 | S & F in repairs under counter basin, vitreous china, white, oval shape, size 190 mm X 550 mm X 445 mm, Cat Part No C0494. of Parryware. or equivalent as given in Appx B fixed in granite counter by making suitable size hole with and includingcement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall/ platform with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed. Note- Granite Counter shall be measured and paid separetly |
| 30 | S & F, in repair, vitreous china urinals, bowl (flat back) without flushing rim of size 590 mm X 375 mm X 390 mm with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed. |
| 31 | S&F10 mm thick toughened glass urinal partition frosted of size 450mmX750mm with and incl stainless steel holding bracketscomplete all as specified and directed. |
| 32 | S & F in repairs PVC low/high level flushing cistern white 10 liters capacity including PVC inlet pipe with brass check nuts low level full both sides along with PVC flush pipe 32 mm dia jointed to WC and handle including brackets fixed in repairs all as specified and as directed. Note:- Rate includes removing existing flushing system of CI or any other quality including brackets. |
| 33 | M & L for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 34 | S & F in repairs 40 mm nominal size, waste coupling of PTMT (half or full threaded), minimum weight 60 grams with including silicone sealant complete all as specified and as directed. |
| 35 | S & F looking mirror of selected quality glass 5.0 mm thick, mounted on 9 mm thick commercial plywood with wooden designed frame including polishing to frame to desire finish & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and as directed. |
| 36 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 37 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 38 | S & F 0.71mm thick plain aluminium sheeting, Alloy 31000 H4 ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 39 | S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and as directed. |
| 40 | S & F mild steel screw bolts (machine made), diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5 cm but not exceeding 30 cm long complete all as specified and as directed. |
| 41 | S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 42 | Taking down eaves gutters and rainwater pipes (any size or pattern), soil waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store or taken on schedule of credit (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 43 | S & F PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 160 mm dia, fixed to walls fixed to walls with and incl MS clamp made out of 30x3mm at 100cm centre to centre with and incl making necessary holdfast and fixed in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate)of size 100x100x150mm complete all as specified and directed by Engineer- in- charge. |
| 44 | S & F UPVC bends without inspection door (any angle), 160 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge. |
| 45 | Fixing only PVC-U, any type as per IS 13592: 2013 single socketed rain water pipes or soil waste pipe in any length with rubber ring joints, 110 mm dia, fixed to walls fixed to walls with and incl MS clamp made out of 30x3mm at 100cm centre to centre with and incl making necessary holdfast and fixed in PCC (1:2:4) type B1 (using 20 mm graded stone aggregate)of size 100x100x150mm complete all as specified and directed by Engineer- in- charge. |
| 46 | Fixing only UPVC coupler, 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge. |
| 47 | S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and as directed. |
| 48 | Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge |
| 49 | Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Taking down existing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down complete all as specified and as directed. |
| 51 | Material & labour for rendering 20 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction finished even and fair complete all as specified and as directed. (Note;- water proofing compound shall be measured and paid separately as supply only) |
| 52 | M & L for applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.8 kg/ sqm ± 5 % per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25° C, 0.87-0.89 kg/ litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and including applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed. |
| 53 | M&L for applying two coats of water proofing coating by using super latest manufactured by pidilite industries limited (or equivalent product manufactured by Sika/fosroc/choksey chemical), water and cement ratio 1:4:7 or the ratio as instructed by manufacture on sunken floor and wall complete all as specified and as directed. |
| 54 | S & F in repairs 25 mm thick soft fibre acoustic wall panel of size 600 mm X 600 mm having sound absorption (NRC) of at least 0.90, fire performance of Class B-s2, d1 - EN 13501-1:2007, insulation value (R Factor-Watts) of 1.2 m² K/W, weight of 5.2 kg/m² , sag/humidity Resistance of RH99 including fixing with internal impaler hook made of metal including fixing and installation as per manufacturer’s instructions and by their approved installation agency complete all as specified and as directed. Model No ‘OPTRA ACOUSTICAL WALL PANELS’ of Armstrong or equivalent as given in Appx B (List of makes) |
| 55 | Providing and Fixing Armstrong Channeled Woodworks perforated panels of width 192 mm, thickness of 15 mm and length 2400 mm, made of Moisture Resistant fibre board with minimum 595 Kg/m³ density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3 mm width and 13 or 21 mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of at least 0.50. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and shall be installed as per manufacturer’s instructions and by their approved installation agency complete all as specified and as directed. Model - WOOD WORKS PERFORATED WALL PANEL G13’ of Armstrong or equivalent as given in Appx B (List of makes). |
| 56 | Providing & Fixing of Armstrong galvanised Vector Micro perforated metal ceiling consisting of 600 mm X 600 mm Vector tiles of galvanized steel in 0.5 mm thickness with micro perforation having hole diameter as 1.5 mm and open area of 10%. The tile shall be powder coated Armstrong Global White color of 60-80 microns painted to a minimum of 120 gsm (both sides combined) galvanizing to be laid on Armstrong grid systems with 24 mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. Back side of the tile will have Soundtex fleece hot pressed to achieve NRC upto 0.7. The tile edges should feature detailing like the Spring Kerf, Access Kerf & the reverse tegular Non Engaging Edge to hide the grid, creating a 6 mm shadow reveal and also provide downward mountability without any tools. The Vector edge tile shall feature security tabs to prevent unauthorized access. The tile shall be laid on Armstrong Prelude 38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 mm and a load carrying capacity of 15.0 Kgs/ sqm (as per standard installation layout mentioned below) & pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per sqm and need to be installed with Suspension system of Armstrong make or equivalent as given in Appx B (List of makes) |
| 57 | S & F Resin Bonded Fibre glass wool conforming to IS: 8183: 1993, 50 mm thick, bulk density 16 kg/m³, at least 90% of the original thickness after compression of 75 percent of the original thickness, maximum shot content of 5% and 15% for 500 micron and 200 micros IS sieve, respectively, maximum 2% moisture content and moisture absorption, incombustible, 0.49 mW/cm °C,, maximum 0.6% Sulphur content wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by suitable adhesive complete all as specified and as directed. |
| 58 | M&L 21mm thick Maple wood Flooring of Kiln seasoned imported maple wood of 60 to 110 mm wide tongued and groove shape fixed over Pine wood runners of 70mm x 45mm treated with anti-termite solution and fixed on the bottom side with 19mm thick EPDM cushioning pads with screws thro0ugh the two wings at 350mm c/c sanding mechanically with floor sander machine and finished with Non Skid Polyurethrane Lacquer with and including avg 50mm thick PCC 1:2:4 type B1 as levelling course to existing floors and post construction anti-termite treatment to floor and alongwith the walls complete all as specified and directed by Engineer-in-Charge. Make : Asia Flooring India or equivalent as given in Appx B |
| 59 | S&F for acoustic wall panel for auditorium cum cinema theater back wall area to observe high reflection of sound.Providing and fixing acoustical wall paneling on studio. P/F acoustical paneling on the walls of Audi 600x600mm full tone board make saint gobain and fixing with GI frame work at 610mm centers of 50mm x 50mm sections in cleats to wall by using metal fasteners, glass wool fill 50mm thick of 24 Kg/Cum density with no air-gap finished in 12mm thick proforated full tone board 8’ x 4’ complete all as specified and as directed. Make -Armstrong or equivalent as given in Appx B (List of makes) |
| 60 | Dismantling of existing cinema hall chairs, with and including shifting the same safely to the user store within 2 Km from working site and bringing back the chair at the time of refixing at execution site as per existing layout with new anchoring bolts and washer arrangement of min 5 inch long fixed with epoxy grout to the floor complete all as directed by Engr-in-charge. |
| 61 | Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 62 | Material and labour for plastering 15 mm thick on other than fair faces of brick wall or stone surfaces in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and directed.Note: Water proofing compound shall be measured and paid for separately. |
| 63 | Material and labour for plastering 10 mm thick on the other side of lathing (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 64 | Supply only integral water proofing compound. |
| 65 | M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the existing surfaces complete all as specified and as directed |
| 66 | Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed. |
| 67 | M & L for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer over a coat of primer with and including 1 to 2mm thick exterior grade wall care putty including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 68 | M & L for complete removal of existing finish on walls including chajjas, facias etc and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer over a coat of primer with and including 1 to 2mm thick exterior grade wall care putty including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 69 | Preparation of old plastered surfaces on walls and applying two coat of white wash complete all as specified and as directed. |
| 70 | Preparation of old plastered surfaces on ceilings and applying two coat of Oil bound distemper with and including 1 to 2 mm wall care putty complete all as specified and as directed. |
| 71 | Complete removal of existing treatment of wall and M & L for preparation of old plastered surface of wall and applying two coats of oil bound distemper over one coat of primer over thin 1 to 2 mm wall care putty to match the surfaces complete all as specified and as directed |
| 72 | M & L for complete removal of existing treatment preparing on old plastered surfaces and applying two coat of oil bound distemper on ceiling complete all as specified & directed by Engineer-in-Charge. |
| 73 | M&L two coat of plastic emulsion paint on wall over aprimer coat and including necessary preparation of surfaces, over thin 1 to 2 mm wall care putty etc, all as per manufacturers instructions and design/colourapproved by GE. (Skilledworkers team to be employed for the work shall be got approved from GE). |
| 74 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces with PCC 1:2:4 , CM 1:4 and removing from site of work complete all as specified and as directed by the Engineer-in-Charge. |
| 75 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces with PCC 1:2:4 , CM 1:4 and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge. |
| 76 | S & F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with particle board core, with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelam PVC Sheet on the front face & 2 mm prelam colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. |
| 77 | Supply and fix solid PVC double door frames of size 50 mm X 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and directed by Engineer in charge. |
| 78 | Providing and fixing 30 mm thick factory made solid panel PVC door shutter as per IS 15931: 2012 with 19 gauge thickness mild steel tube and tapering 20 mm in 45° angle on both sides forming styles and on the inner side to form top and bottom rail and on both sides to form lock rail complete all as specified and as directed. |
| 79 | Supply and fix solid PVC door frames of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube all as per specification & drawing complete all as specified and directed by Engineer in charge. |
| 80 | S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 81 | S & F 100 mm heavy weight( Type 1) stainless steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed. |
| 82 | S & F cast aluminium alloy handle, cast type, 125 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 83 | S & F cast aluminium alloy handle, cast type, 150 mm size, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed. |
| 84 | S&F H Type Door Handle Size (Handle Size - 457 MM 304 Grade Stainless Steel (one set of 2 nos) and fixed complete all as specified & as directed. |
| 85 | S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 86 | S&F Aluminium powder coated door shutter single / double leaf, side hung type on floor door spring (to be paid sepratly) 44.45mm mm wide (two panels) fabricated having hanging and meeting style 85.00 mm X 44.45 mm X 1.80mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83.00 mm X 44.45mm X 1.70mm thickand including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of \"D\" type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing, locking arrangement with mortice lock 6 lever, 1 No floor door stopper and necessary fitting & fixtures complete all as specified and directed by Engr - In - Charge. |
| 87 | Providing and fixing powder coated aluminium grill ( anodises transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including citting the grill to properopening size for fixing and operation of handles and fixing approved anodised as per requirment and direction of enginner incharge ( Only weight of grill to be measured for payment). |
| 88 | S&F for aluminium powder coated (of required colour) two track sliding windows frame top & sidesof size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (section No 20832) and shutter top and bottom of size 40 x 18 x 1.55mm (section No 20736) and lock side shutter frame of size 40 x 15 x 1.45mm (section No 20737) with rubber gasket, beading and locking arrangement including making good to disturbed portion complete including stainless steel wiremesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 4 mm thick glass with necessary rubber beading gasket etc complete all as specified. |
| 89 | M & L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 90 | Supply & fix sheet glass, ordinary quality, 5.5 mm thick and glazed with oil putty or fixed with beads in square exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 91 | S&F 5mm thk PVC sheet including necessary erection with and incl rubber gasket to aluminium door complete as specified and directed |
| 92 | S & F exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, cast iron non porous body and black plate, cast iron piston or pack piston/ pillion, painted and finished with lacquer in colours as per IS 3564: 1995 complete all as specified and as directed. |
| 93 | S & F floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring, overall length of cover plate 150 mm, 4.5 mm thickness of cover plate, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996, suitable for 40 & 45 mm thickness of door shutter, fixed in floor complete all as specified and as directed. |
| 94 | S & F in repairs 15 mm nominal size, nonrising spindle type fancy stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 95 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 96 | S & F double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 97 | M&L for 16 to 18mm thick Granitework (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) 10 mm thickincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 6mm bevelled edging/nosing of free ends complete all as specified and directed. |
| 98 | S&F MS chromium platedcurtain rod 25 mm dia , with and includingMS chromium plated decorative round finials on either end provide a visually balanced appearance including MS chromium plated brackets fixed to wall with 30 mm wooden steel screws and PVC rawl plug, anchors, and installation as in repair complete. |
| 99 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 100 | M & L for concealed additional point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through andincluding medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note : cost of cutting chase and making good shall be included in the rate quoted by the bidder”.) |
| 101 | M & L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 102 | M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed.(Note: Cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 103 | M & L for concealed point wiring for one 3 pin/ 5 pin 5 Amps socket outlet on the same board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 104 | M & L for concealed additional point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through andincluding medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note: Cost of cutting chase and making good shall be measured and paid separately.) |
| 105 | M & L for concealedpoint wiring for one 3 pin/ 5 pin 15 Amps socket outlet on independent board complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 2.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stress classPVCconduit as per IS 9537 (Part-III) : 1983 of suitable size as required at site including all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 2.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed. (Note : cost of cutting chase and making good shall be included in the rate quoted by the bidder.) |
| 106 | S & F modular switch, 1 way, 6A, 1 module including modular PVC cover plate with frame for metal flush box of suitable size as per reqmt complete all as specified and as directed. |
| 107 | S & F modular switch, 1 way, 6A, 1 module including modular PVC cover plate with frame for metal flush box of suitable size as per reqmt complete all as specified and as directed. |
| 108 | S & F (3 pin and 2 pin) combined modular socket outlet, 6A, 2 module including modular PVC cover plate with frame for metal flush box of suitable size as per reqmt 240V AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed. |
| 109 | S & F (3 pin and 3 pin) with common earthing pins, combined modular socket outlet, 6A & 16A, 2 module including modular PVC cover plate with frame for metal flush box of suitable size as per reqmt 240V AC, 50 Hz with earthing contact, rewirable, pillar type terminal, normal protection, unenclosed, without Shutter, Flush type, Design B complete all as specified and as directed. |
| 110 | S & F Modular fan regulator, 120W , 2 modules including modular PVC cover plate with frame for metal flush box of suitable size as per reqmt complete all as specified and as directed. |
| 111 | S & F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed. |
| 112 | S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 113 | S & F Bayonet plastic lamp holder, 2 A, 250 V, ordinary, backplate, non-switched, unenclosed, without T marking, B22d complete all as specified and as directed. |
| 114 | S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 Kwith fitting complete all as specified and directed. |
| 115 | S&FLED 18W recess mounted indoor type back lit downlighter suited for any modern workspace complete all as specified and directed. |
| 116 | S&FLED 10W UP-down light with IP43 protection indoor type complete all as specified and directed . |
| 117 | S&FLED 12W surface mounted decorative mirror/picture light CDL complete all as specified and directed. |
| 118 | S&F flexible LED Strip uses high brightness SMD LED as light sourceas directed by Engr-in-Charge. |
| 119 | Supply and installing single sided LED signage (Exit) with 3W LED of red/ green colour including built in battery back up for 2 hours complete all as specified and directed. |
| 120 | Supply and installing single sided LED signage (Entry) with 3W LED of red/ green colour including built in battery back up for 2 hours complete all as specified and directed. |
| 121 | Supply and installing single sided LED signage (Gents Toilet) with 3W LED of red/ green colour including built in battery back up for 2 hours complete all as specified and directed. |
| 122 | Supply and installing single sided LED signage (Ladies Toilet) with 3W LED of red/ green colour including built in battery back up for 2 hours complete all as specified and directed. |
| 123 | Supply and installing LED step light with 4W LED made out of white powder coated aluminium body with IP-54 protection complete all as specified and directed. |
| 124 | Supply and fixing ceiling fan 230 V, 1400 mm sweep, Five star rated with brushless direct current motor (BLDC) including fixing arrangement complete all as specified and directed. |
| 125 | Supply and fix Exhaust fans 300 mm sweep, plastic body complete with motor & blades and all required accessories for fixing/hanging complete all as specified and as directed. |
| 126 | S&F heavy duty metal body Exhaust fan suitable for single phase supply of 380 mm sweep ith BEE star Ratedcomplete all as specified and directed. |
| 127 | S&F sheet metal enclousure MCCB DB TPN double door type AC 415 V 12 way with 250 Amps rated copper bus bar vertical typeflush to wall including taking down old one complete and making good of distructed surface including taking down old one complete. |
| 128 | S & F single door MCB Distribution board of sheet metal enclosure, single pole and neutral, 8 way with 200 Amps rated bus bar, 240 volt, IP42 protection grade and fixed with PVC plug and screws and grouted in wall with M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 129 | S & F sheet metal enclosure with socket plug top and MCB DP enclosure with three pin & earth plug and socket complete with MCB DP 25 Amps 415 volts complete all as specified and as directed. |
| 130 | S & F circuit breakers (MCB), single pole (SP), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 6A to 40 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 131 | S & F circuit breakers (MCB), two pole with one protected pole (SPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage single phase, rated frequency 50 Hz, Rated current 40 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 132 | S & F circuit breakers (MCB), four pole with three protected pole (TPN), unenclosed, panel board type, screw type terminals for external copper conductors, C-type instantaneous tripping, rated voltage 415 V three phase, rated frequency 50 Hz, Rated current 63 A, Rated Short circuit capacity 10 kA, any type of fixation, Protection IP 20 complete all as specified and as directed. |
| 133 | S&F MCCB four pole 63-100A, 16KA breaking capacity with thermal magnetic release complete all as specified and directed.( 100A-1,63A-4) |
| 134 | Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 6 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note 1- Three runs of 6 sqmm cable, one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2 : cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 135 | Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 4 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 4 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note 1- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2 : cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 136 | Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 1.5 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note 1- Two runs of 1.5 sqmm cable, one run of 1.5 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2 : cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 137 | Supply and fix concealed sub main wiring complete with and including two Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 10 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 10 sqmm one No single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note 1- Two runs of 10 sqmm cable, one run of 10 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2 : cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 138 | Supply and fix concealed sub main wiring complete with and including four Nos single core PVC insulated, unsheathed flexible conductor FR-LSH cables 16 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through and including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 16 sqmm two Nos single core copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable for earthing and connected to common earth dolly complete all as specified and directed by Engineer-in-charge. (Note 1- Four runs of 16 sqmm cable, two runs of 16 sqmm cable and one run of conduit shall be measured and paid as one unit length. Note 2 : cost of cutting chase and making good shall be included in the rate quoted by the bidder) |
| 139 | M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge. |
| 140 | Supply install testing and commissioning 120W LED 6000K flood light with the help of suitable accessories electrical wiring of luminaries with all wiring materials complete all as specified and directed by Engr-in-charge. Make :- Havells cat part No LHEPCZU7P46J120 or equivalent as given in Appx B (List of makes) |
| 141 | Supply and fixing LED security light fitting 60W watt with 230 Volts with IP 66.High Impact resistance complete with all accessories internally pre-wired and fixed to walls complete all as specified and directed. |
| 142 | Supply and fixing of bracket suitable for building light fitting made out of 40 mm dia GI tubing light grade 1.5 m long bent to shape, fixed with neccessary nuts, bolts and clamps complete all as directed by Engr-in-Charge |
| 143 | Supply, install, testing and commissioning of Distribution board, pedestal and compartmental type suitable size enclosures cubical weather and vermin proof totally enclosed made out of 2.0 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door withfront openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters formounting switch gear etc, suitable arrangement for fixing of electrical meterincluding pre wiring from Bus bar to Meter and Meter to MCCB/MCB(for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCCB/MCB)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete incl suitable sizepanel mounting MS angle base frame duly painted with synthetic enamel black paint.The cost of the mounting of panel on MS Angle or PCC pedestal(foundation)required as per siteis deemed to be included in the quoted rate of the item. The panel will comprise of the following.INCOMING :-(i)MCCB 125 Amps FP, 415 Volt 35 KA= 01 No ,(ii) ON Load change over switch Each 415V in , 4 pole of capacity 150Amps-01 Nos(ii) Phase indicating lamp LED type– 1 Set of three.(iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators-04 Nos.OUT GOING :-(i)MCCB 100 Amp,415 Volt,25 KA, Three pole and neutral -1 No Make : L&T/Legrand/Siemens/Schnedier/Havells(i)MCCB 63 Amp,415 Volt,25 KA, Three pole and neutral -4 No Make : L&T/Legrand/Siemens/Schnedier/Havells(ii)MCB DP 20 Amp,230Volt,10 KA,C curve -4 No Make : |
| 144 | S&F perforated cable tray of stainless steel , hot dip galvanized units with associated fittings forming a rigid structural system used to securely support wire/cables etc complete all as specified and directed by Engr-in-charge |
| 145 | Supply and fixing LED Bollard 10 watt in inverted pyramid tropod type LED Bollard with soft 360 light, IP 65 protection, resistant to corrosion with better optic for uniform distribution Cat part No LBLSN-10-CDL of make - Crompton Greaves or equivalent as given in Appx B (List of makes), complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete including taking down old unserviceable Garden light all as directed by Engr-in-Charge. |
| 146 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or water supply pipes lines etc or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed. |
| 147 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed. |
| 148 | Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 149 | M & L for laying of bricks locally available sub class \"B\" bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed. |
| 150 | Supply & spreading in trenches sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly. |
| 151 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core, nominal cross sectional area of main conductor 6 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 152 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 50 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 153 | M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed. |
| 154 | Supply and fix thermoplastic polycarbonate street light juntion box of size 155x210x92mm which include locknut, check not, glands , fixing clamps complete accessories as per technical reqmt, complete with IP 66 degree of protectionMCB SP, 6 Amps - 01 Nos |
| 155 | Supplying & laying in trenches 50 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. |
| 156 | Meterial and labour for fabricate, supply, install, connect, test and commision of LT Feeder Pillar Box outdoortype, made out of 3.15 mm thick CRCA sheet weather/vermin proof, double door, 3 phase 4 wire, 440 volts , AC, 50Hz, with TPN aluminium bus bar of capacity 100 Amps with PVC insulated colour code sleves, mounted on porceclain insulators, complete with digital Voltmeter, digital Ammeter with CTs and selector switches, backup fuse, R-Y-B indicating lamps with toggle switches duly wired including locking arrangement and painting with two coats of synthetic enamel paint over a coat of red oxide, cable gland for incoming and outgoing cables of suitable sizes,suitable size panel mounting MS angle base frame duly painted with synthetic enamel black paint and totally mounted on PCC(1:3:6) foundation upto a height of 45 cm above ground level copmlete all as specified and directed . The panel board suitable sizefor the followingswitch gears. (i)MCCB 63 Amps four pole, 415 Volt 16 KA= 01 No (ii) Phase indicating lamp LED type– 1 Set of three.(iii) Aluminium bus bar 100 Amps capacity with bus bar supports, DMC/SMC insulators-04 Nos. |
| 157 | Disconnecting & Taking down/out unserviceable LT Cable/Service wire of any size and any description from trenches, floors, walls, GI Pipes, etc including serviceable cables, bricks etc keep in safe custody for re-use complete all as specified and as directed. NOTE : Nesessary earth works will be measured & paid seperately under appropriate items. |
| 158 | Dismantling/Taking down existing LT feeder pillar box/ LT panel board of any type and size including recovering serviceable items including making good disturbed surfaces complete all as specified and as directed. |
| 159 | M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge. |
| 160 | M & L for brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 161 | M & L for auguring under road, pavement, hard standing, railway lines by trenchless technology using latest boring technique and necessary machine for insertion of GI pipe of 50 mm and 40 mm nominal bore complete all as specified and as directed. |
| 162 | M&L fixing arrangement on side wall at any height for ceiling fanby providing MS Angle Iron , bracings ,supports,clamps and back plates fabricated from new structural steel sections including nuts, bolts, washers, welding, bending cold or hot,drilling holes for bolts in any shape or size as indicated or directed by Engr-in-Charge and inclusive of one red oxide metal primer coat,one under coat and one finishing coat of approved quality aluminium paint. |
AI Tender Summary
Tender Timeline
Sep 15, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 09, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 09, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 15, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 22, 2022
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
CompletedSep 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender