Public Works Department-PWD has published Water Supply Arrangement Of Uws Schemes Under Dws Division Ambassa During The Year 2022-23 / Sh: Repair & Maintenance Of Electrical Panel Board Including Fitting Fixing Of Electrical Appliances ( Spare Parts ) For Dtw Schemes Of Ganganagar Rd Block Are. Submission Date for this Tender is 13-09-2022. Spare Part Tenders in dhalai Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Providing and fitting fixing steel sheet enclosed switch fuse unit(suitable for DIN fuses), triple pole with Neutral Link (TPN),415/500 Volt, L & T / Havells / BCH make etc. completeas per specification and direction of the Engineer-in-charge. |
2 | ii. 63 Amps |
3 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
4 | i. 25 HP/18.5 kw Relay range within 13-21 + 10% |
5 | Providing and fitting fixing of Direct on line (DOL) motor starter L&T/BCH make ( 3 phase, 50 Hz, 10 HP/7.5 kw relay range within 13-21 + 10%) in steel sheet enclosure complete as per direction of the engineer in charge. |
6 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) Gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos MS angle post ( size 2 inch x 2 inchx 9 feet ), nuts & bolts etc. for irrection of the same by1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and paintingtwo ormore coats & plastic paint as per specification and direction of the Engineer-in-charge. |
7 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge. |
8 | i. 10.0 sqmm |
9 | ii. 16.0 sqmm |
10 | Providing and fitting fixing of moving iron type, Range 0-500 V, 96 mm x 96 mm size AC Volt meter ( L & T / AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
11 | Providing and fitting fixing of moving iron type, Range 0-100/0-200 amps, 96 mm x 96 mm size AC Amps meter direct reading type ( L & T / AE make) with selector switch and CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer-in-charge. |
12 | Providing and fitting fixing of Moulded Case Circuit Breaker (MCCB) of different Thermal release range , 415 + V, 50Hz (L & T, BCH, ABB make) as per specification and direction of the Engineer-in-charge. |
13 | i. 63-80 Amps |
14 | iii. 50-63 Amps |
15 | Providing and fitting fixing3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder completeas per specification and direction of the Engineer-in-charge. |
16 | Providing and fitting fixing heavy duty box type (Resin filled) power factor correction capacitorL & T make etc. completeas per specification and direction of the Engineer-in-charge. |
17 | i. 5-15 kVAr 440 V |
18 | Supplying and fixing of fuse unit kitkat in porcelain base in/c necessary connection etc. as per required (HPL) make. |
19 | i) 63 Amps cutout |
20 | ii) 100 Amps cutout |
21 | Supplying & fixing of aluminium thimble in/c necessary connection etc as required |
22 | Providing and fitting fixing Single phasing preventor +selectable under voltage +selectable over voltage on delay 5 sec & off delay 15 sec phase asymmetry 10% L & T /BCH/HAVELS/Siemens etc. make complete as per specification and direction of the Engineer-in-charge. |
23 | Providing and fitting fixing of Bimetal overload relay type series L&T make) as per direction of the Engineer-in-charge. |
24 | i. 13-21 AMP |
25 | ii.20-32 AMP |
26 | iii. 28-42 AMP |
27 | Providing and fitting fixing of slandered operation coil for 415V,50Hz,L&T make as per direction of the Engineer-in-Charge. |
28 | i. ML 1.5 |
29 | Repairing of existing L&T make FASD Starter by providing & fitting fixing of necessary spare contact kit(in/c spare coil),replacement of damaged connection wire in the starter,testing & commissioning etc. as per specification & direction of the Engineer-in-Charg |
30 | i. ML 1.5 |
31 | Providing and fitting fixing of Thermal Timer Type GT 200,415V,50Hz for 5-18 sec,L&T make as per direction of the Engineer-in-Charge. |
32 | Providing and fitting fixing of Thermal Timer Type ET 100,415V,50Hz for 9-30sec,L&T make as per direction of the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail