Repair And Renovation Work Of Hsc Satgawan Dist Koderma
Tender Value
30.16 Lakhs
Estimated cost
Bid Submission
29 Aug 2022
0 days left
EMD
62100
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satgawan → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Work Of Hsc Satgawan Dist Koderma
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceablematerials with all leads all complete as per direction of E/I. |
| 2 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 3 | Dismantling R.C.C work including stacking serviceable materials in countable stacks within 15m.lead and disposal of unserviceable materials with all leads complete as per building specification and direction of E/I.Quantity Vide old Estimate pg. No. 16 |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15\" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size)Qty. vide item 3. |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended Floors, roofs, landings, balconies and access platform |
| 6 | Providing Tor steel reinforcement of 8mm dia rods as approved design and drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position ( excluding carriage ofbars to work site ) all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for Tata ( Tiscon ), SAIL, JSPL, Electrosteel Ltd. Bokaro and Vizal (RINL)) |
| 7 | Dsimantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.Quantity vide pg. no. 18-26 |
| 8 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l. |
| 9 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.Ceiling Plaster Area (Item No. 7) |
| 10 | Providing and laying 12mm water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: |
| 11 | Providing and laying granite over shrlves ……………..do ………do……………………E/I |
| 12 | Providing and laying vetrified wall tiles directed by Engineer-in-charge:Qty Vide old Estimate pg. 29 |
| 13 | Providing and fixing steel door frame …………do….do……………………………..E/I |
| 14 | Supplying, fitting & fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 15 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface, including preparing the plastered surface by rubbing smooth with pumice stone of fine sand paper, applying putty whwrever required, scaffolding, washing of floors and taxes all complete as per building specufications and direction of E/L. |
| 16 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales, smokes, grease and sand preparing, including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 17 | Providing two coats of synthetic enamel paintof approved shade and make over steel surface including cleaning the surface thoroughlyscaffolding and taxes all complete as per buildingspecification & Direction of E/I. |
| 18 | Taking down old door and window shutters including stacking serviceable materials with all leads all complete as per direction of E/I. |
| 19 | Taking down chaukhats in doors including stacking serviceable materials with all leads all complete as per direction of E/I. |
| 20 | Easing and adjusting door and window shutters with chaukhats in old work complete as per specification and direction of E/I. |
| 21 | providing 250mm wide brick draing in cement mortar (1:6) with av. 250mm and 250mm apron including stacking serviceable material within 15M lead and disposal of unserviceable material with all leads all complete as per direction of E/I.- |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 23 | Providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thicknes to be specified by the manufacturer) or 1st quality conforming to IS: 15622 of approved make in colours white lvory,Grey,Fume Red Brown,laid on 20mm thik bed of cement mortr 1:4(1 cement: 4 coarse sand),including grouting the joints with white cement and matching pigments etc. complete. |
| 24 | Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :300x20x6 mm |
| 25 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm |
| 26 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.300 mm weighing not less than 200 gms |
| 27 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm |
| 28 | Providing and fixing bright finished brass hanging type floor door stopperwith necessary screws, etc. complete. |
| 29 | Providing and fixing on wall face unplasticised rigid PVC rain water pipes confirming ti IS : 13592 type A including jointing with seal ring confirming ti IS : 5382 l;eaving 10mm gap for thermal expansion.Single socked pipes 110 mm dia |
| 30 | Providing and fixing on wall face unplastisised rigid moulded fittings/accessories for unplasticised PVC rain water pipes confirming to IS: 13592 type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion.Bend - 110mm |
| 31 | Shoe - 110mm |
| 32 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mmhard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 33 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.Qty vide Old Estimate pg. -29(5328.57+1142.76 outer) |
| 34 | Providing and laying APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 3 mm thick water proofing membrane, blackfinished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm bythe same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the p300/250N. Softening point of membrane not less than 150°C. Coldflexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through theauthorised applicator of the manufacturer of membrane :22.20.1 3 mm thick |
| 35 | Carriage of Materials:- cement +steel |
| 36 | Bricks - 25km |
| 37 | SAND av.LEAD13 K.M |
| 38 | Stonechips lead8km |
| 39 | PART B Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complere as per specification and direction of E/I. |
| 40 | Dsimantling old plaster and pointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.Quantity vide pg. no. 18-26 |
| 41 | Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per specification and direction of E/I.qty=2788.26 of 80%=2230.60 |
| 42 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.out side plaster |
| 43 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface.Same as Out Side Plaster(qty vide old estimate Pg. 18-26 |
| 44 | Letering with blackjapan paint do---------do |
| 45 | Suppling Fitting and fixing glass panles including supply of putty, beds and nails after taking of old and broken glass pans 4mm |
| 46 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.Qty vide Old Estimate pg. -29(5328.57+1142.76 outer) |
| 47 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/I.20mm |
| 48 | Providing and fixing Gun metal full way valve of approved quality all complete as per specification and direction of E/I.25mm dia |
| 49 | 32mm dia |
| 50 | Cutting chajja or cornice for laying G.I. pipe and restoring the same with R.C.C. (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of Engineer-in-charge. |
| 51 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.250mm thick wall |
| 52 | RCC Chajja |
| 53 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/I. Glass shelf with C.P. brass rail - 450mm x 125mm |
| 54 | Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror - 450mm x 300mm |
| 55 | C.P. brass towel rail 20mm x 600mm with bracket container |
| 56 | C.P. brass soap dish container medium quality with screw and hinges etc. |
| 57 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. \"p\" trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I.580mm long - With 10 liter low level PVC cistern |
| 58 | Supplying, fitting and fixing 40mm high viterous white glazed earthen E.W.C. with \"p\" trap of Parry/hindustan or any other approved I.S.S. make including supplying and fixing 15 liters C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grams 15mm P.V.C. alkathene pipw 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead o commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approvd paint over a coat of red oxide priming, all complete as per specification and direction of E/I.Witl, \"P\" trap - 10 liters low level P.V.C. cistern |
| 59 | Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindl stop cock approved quality of weight not less than 30 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 60 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 61 | Providing and fixing on wall face unplasticied Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (i) Single socketed pipes.75 mm |
| 62 | 110 mm |
| 63 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door - 75x75x75 mm |
| 64 | Single tee with door - 110x110x110 mm |
| 65 | Single tee without door - 75x75x75 mm |
| 66 | Single tee without door - 110x110x110 mm |
| 67 | Bend 87.5° - 75mm |
| 68 | Bend 87.5° - 110mm |
| 69 | DismantlingW.C.Pan of all sizes including disposal of dismantledmaterials i/c malba all complete as per directions of Engineer-in-Charge. |
| 70 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall-25 mm nominal outer dia Pipes |
| 71 | 32 mm nominal outer dia Pipes |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes |
| 73 | 20 mm nominal outer dia Pipes |
| 74 | S/F/F Vitreous white glazed earthen ware indian squating urinals…..do……………..do………………………………………E/I |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 76 | Special type C.P. Bath roomFitting for V.I.P.Buildings(JAL, Jaquar, Mark or Equivalent) Bib cock (Long Thread) |
| 77 | Angular Stop Cock |
| 78 | carriage of materials cement |
| 79 | sand |
| 80 | ADD 12% GST |
| 81 | ADD 1% LABOUR CESS |
AI Tender Summary
Tender Timeline
Aug 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender