construction Of Awc Building At Lamtibahal-Iii In W.No.11. Awc Building
Tender Value
13.56 Lakhs
Estimated cost
Bid Submission
03 Sep 2022
0 days left
EMD
13560
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
brajrajnagar → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction Of Awc Building At Lamtibahal-Iii In W.No.11. Awc Building
BOQ
| Sl. No. | Item Description |
| 1 | A) Cost of Main Building - Earth work excavation in foundation in hard soil or gravelly soil within 50mtrs. initial lead and 1.5mtrs. initial lift including rough dressing and breakingclods to 5 cms. to 7cms. and laying in layers notexceeding 0.3 mtrs. in depth |
| 2 | Providing, filling sand in F.N.D & plinth includingcost conveyance and royalty etc. complete. |
| 3 | Cement concrete (1:4:8) with 4c.m. sizeh.g.metalincluding cost conveyance & royaltyand watering for curing etc. complete. |
| 4 | Brick workFly Ash Brick in C.M (1:6) in Foundation including cost, conveyance and royalty and watering for curing etc complete. |
| 5 | Brick workFly Ash Brick in C.M (1:6) inSuper St. including cost, conveyance and royalty and watering for curing etc complete. |
| 6 | Cement concrete (M-25) with 20mm size down grade crusher broken hard granite chips including cost conveyance & royalty and watering for curing etc. complete. |
| 7 | Rigid and Smooth cantering & shutting for R.C.C. Work including false work Dismantling then after costing etc. complete. |
| 8 | a)Foundation and plinth Bend |
| 9 | b)Beam & Column |
| 10 | c) Lintel |
| 11 | d) Roof Slab |
| 12 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 13 | 12 mm. thick C.P (1:6) with all cost, conveyance and royalty etc. all complete. |
| 14 | 16 mm. thick cement plaster (1:6) over brick or stone masonry all cost, conveyance and royalty etc. all complete. |
| 15 | 6 mm. thick C.P (1:4) with all cost, conveyance and royalty etc. all complete. |
| 16 | 12 mm. thick C.P (1:4) with Cement Punning all cost, conveyance and royalty etc. all complete. |
| 17 | Cement concrete (1:2:4) with 12mm size crusher broken hard granite chips including cost conveyance & royalty and watering for curing etc. complete. |
| 18 | Wall primer one coat with approved quality of Primer including cost of primer. Etc complete |
| 19 | Finishing walls with Weather Coatof approved shade on new work two coat to give an even shade exculding cost of paint. Per 1 Sqm. |
| 20 | Distempering two coat to walls with distemper of approved shade on old work to give an even shade exculding cost of distemper etc. all complete. |
| 21 | Supplying, fitting and fixing of M.S Iron Door & window etc. all complete. |
| 22 | Painting two coats with approved quality of paint etc. all complete. |
| 23 | Sanitary fitting |
| 24 | 4\" PVC Pipe for swege |
| 25 | 2nos. Of Indian latrine pan |
| 26 | P-trape & 4\" PVC vent cowl |
| 27 | 150mm gas pipe |
| 28 | Vent cowl |
| 29 | 2.5mm. Thick grading concrete (1:2:2) with 12m.m. size h.g. C.B. chips including cost, conveyance & royalty etc. complete. |
| 30 | Fixing Ceramic tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excludingcost of precast tiles etc. all complete. |
| 31 | Fixing tiles in dados skirting and risers of stepson 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles etc. all complete. |
| 32 | 2.5 cm. Thick A.S flooring with C.C. (1:2:4) with 12m.m. size h.g. C.B. chips including cost, conveyance & royalty etc. complete. |
| 33 | Display board |
| 34 | Learing orientation painting |
| 35 | B) Const. of Boundary wall |
| 36 | Earth work excavation in foundation in hard soil or gravelly soil within 50mtrs. initial lead and 1.5mtrs. initial lift including rough dressing and breakingclods to 5 cms. to 7cms. and laying in layers notexceeding 0.3 mtrs. in depth |
| 37 | Providing, filling sand in F.N.D & plinth includingcost conveyance and royalty etc. complete. |
| 38 | Cement concrete (1:4:8) with 4c.m. sizeh.g.metalincluding cost conveyance & royaltyand watering for curing etc. complete. |
| 39 | Brick workFly Ash Brick in C.M (1:6) in Foundation including cost, conveyance and royalty and watering for curing etc complete. |
| 40 | Brick workFly Ash Brick in C.M (1:6) inSuper St. including cost, conveyance and royalty and watering for curing etc complete. |
| 41 | Cement concrete (M-20) with 20mm size down grade crusher broken hard granite chips including cost conveyance & royalty and watering for curing etc. complete. |
| 42 | Rigid and Smooth cantering & shutting for R.C.C. Work including false work Dismantling then after costing etc. complete. |
| 43 | a) Plinth Bend |
| 44 | b)Column &Beam |
| 45 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 46 | 12 mm. thick C.P (1:6) with all cost, conveyance and royalty etc. all complete. |
| 47 | Wall primer one coat with approved quality of Primer including cost of primer. Etc complete |
| 48 | Finishing walls with Weather Coatof approved shade on new work two coat to give an even shade exculding cost of paint. Per 1 Sqm. |
| 49 | Supplying, fitting and fixing of M. S. Iron gate etc. all complete. |
| 50 | Painting two coats with approved quality of paint etc. all complete. |
| 51 | C) Digging of Bore well |
| 52 | Labour for drilling and perfectly vertical bore hole of specified dia for specified depth below ground level through consolidated and consolidated roack with combination drilling rig as required to suit the site condition as per the direction of Engineer-in-charge including supply of rig with its accessories T&P and consumables etc to lowering of 125mm x 100mm dia GI/PVC/MS Pipe for housing fitted with socket with or without well screen and as per the necessary for soft medium, hard and boulders formation (GI/PVC/MS casing pipes if required to prevent collapse of over burden is to loweing andwith drawing after compeltion of the tube well) |
| 53 | Depth |
| 54 | Lowering the following size of PVC ASTM Sch-80 housing pipe with or without slotted from ground level upto 45.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes T&P etc all complete and keeping the top of casing pipe threaded including plugging tubewell to prevent entry of foreign materials. |
| 55 | A) Lowering of 125mm dia PVC pipe=50.0m |
| 56 | B) Supply of 125mm dia PVC ASTM Sch--80 pipe includign all cost complete |
| 57 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. |
| 58 | Supply of 0.5 HP, 7ST 4\" dia ISI mark single phase submersible pumpset with pannel box etc. complete. (To be paid as per actual) 0.5HP submersible pump 1 set |
| 59 | Cost of 32mm HDPE Pipe |
| 60 | Cost stainless steel nipple |
| 61 | Cost of 1.5sqmm electricCable |
| 62 | Cost of Bore Cover |
| 63 | Cost of clamp |
| 64 | Cost of steel rope . |
| 65 | Cost of installation of pump including accessories etc. complete. |
| 66 | D)Water Supply |
| 67 | Laying and jointing 32mm dia P.V.C. Pipe (Sch-80) with G.I. fittings etc. all complete. |
| 68 | Supplying fitting and fixing of 32mm Brass FW valve etc. all complete. |
| 69 | Supplying all labour T&P for fixing of C.I. Bib Cock installed at Stand Post. |
| 70 | Cost. of materials |
| 71 | i) 32mm P.V.C. Pipe |
| 72 | ii) 12mm P.V.C. Pipe |
| 73 | ii) 32mm Brass Valve |
| 74 | iv)½” Bib Cock |
| 75 | v) 2000Ltr. Syntex Tank |
| 76 | D) Electrification |
| 77 | Recessed wiring to light pointpoint with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P. 5 / 6 amps, one way modular switch, ISI marked type switch,Modular base & cover for 1 module, Modular G.I. box for 2 module 18 SWG ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard ) a) Group-C |
| 78 | Recessed wiring to Celingfan point /with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P. 5 / 6 amps, one way modular switch, ISI marked type switch,Modular base & cover for 1 module, Modular G.I. box for 2 module 18 SWG ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard ) a) Group-C |
| 79 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard) |
| 80 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copperconductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch ,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVCinsulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex /L&T / Anchor / Havels / V Guard ) |
| 81 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standardlength (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductorincluding providing and fixing phenolic laminated sheet steet cover on the fan box etc asrequired.etc. as required. |
| 82 | Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening,including making the hole to suit the size of the above fan, making good the damage complete,connection, etc as required |
| 83 | Supplying of Exhaust Fan300MM ( Havells - Single Phase - 900 rpm) |
| 84 | Recessed wiring toexhaust fan pointwith 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P. 5 / 6 amps, one way modular switch, ISI marked type switch,Modular base & cover for 1 module, Modular G.I. box for 2 module 18 SWG ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels / V Guard )FOR-Group-A |
| 85 | Power Connection |
AI Tender Summary
Tender Timeline
Aug 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender