|
| 1 | Trimming grass and weeds removal of rubbish up to a distance of 30 m outside the periphey of the area as per Technical Specification Clause 201.1of MoRD specification for Rural roadsand as per the direction of the Engineer-in-charge. |
| 2 | Conveying from spreading H.G. metal 45 mm sizefor patch or pot hole repairs and consolidation with H.R.R. or rammers, crusher screening/ gravelling and sand binding, etc. complete inluding cost and conveyance of metal, crusher screening/moorum and sand complete. with all cost conveyance royalty, taxes of the materials and labour with T&P required for the work etc. complete or as directed by the Engineer-in-charge. |
| 3 | Construction of embakment with approved materials obtained from borrow pits with all leads and lifts transporting to site by mechanical meansspreading grading to required slope compacting to meet the requirements of table 300.2 and clause 305 of MOSRTH specification for road and bridge works (4th revision) and as per the direction of the Engineer-in-charge. |
| 4 | Providing, laying, spreading & compacting graded stone aggregates to Wet Mix Macadam including premixing the materials with water at OMC in mechanical mix plant, carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause-406 of MoSRT&H Specification for Road & Bridge works(4th Revision) as per specification and direction of Engineer-in-charge. |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical meansas per the direction of the Engineer-in-charge. |
| 6 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broomas per the direction of the Engineer-in-charge |
| 7 | Labour for surface dressing with 12 kg penetration grade of bitumen and 0.15 cum of 19mm nominal size chips per 10 sqm and rolling with PRR incl.cost and conveyance of chips and bitumen etc.all complete. |
| 8 | Providing and laying Semi Dense Bituminous Concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled,vibratory roller and tandem rollers to achieve the desired compactionas per Clause-508 of MoSRT&H Specification for Road & Bridge works(4th Revision) as per specification and direction of Engineer -in –charge. |
| 9 | Construction of Moorum Shoulder with approved material obtained from borrow pits with a lifts & leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables300.2 of MoRD with a lead upto 5000 m and as per the direction of the Engineer-in-charge. |
| 10 | Reinforced cement concrete M 15 grade kilometre stone of standard design as per IRC : 8 fixing in position including painting and printing etc as per drawing andas per the direction of the Engineer-in-charge. |
| 11 | Ordinary kilometer stone |
| 12 | 200 mm stone |
| 13 | Providing and fixing of typical Citizen Information board as per MoRD specification and drawing. Three MS plates of 50 x 5 mm. thick, back plate duly welded with 75 mm dia steel tubes back on edges as per drawings. The upper and lower plate will be welded with MS flat iron frame of 50mm x 5 mm. The steel tubes duly embeded in cement concrete M-15 grade blocks of 600mm x 600 mm x 750 mm below ground level. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with readymix synthetic enamel paint of superor quality in required shade and colour. All selection of framed posts and steel tubes will be painted with primer and two coats of epoxy paint as per drawing and as per the direction of the Engineer-in-charge. |
| 14 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering gradeand colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing and as per the direction of the Engineer-in-charge. |
| 15 | 600 mm equilateral triangle |
| 16 | 600 mm x 450mm rectangular |
| 17 | Construction of RCC guard posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate,true to line and grade,tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing andas per the direction of the Engineer-in-charge. |
