Jaipur Vidyut Vitran Nigam Limited-JVVNL has published Construction Of B Wall Between Acos Premises And Sub Station Renovation Work Of Various Jpd Bldgs At33 Kv S S Nainwa Road Bundi. . Submission Date for this Tender is 23-08-2022. Substation Tenders in bundi Rajasthan. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils (B-1.8) |
2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).(B-3.2.6) |
3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand). (B-6.1.7) |
4 | Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification :(B-15.6) |
5 | Flyash Lime Gypsum Brick Works withFlyash Lime Gypsum Brick Works of class designation 75 in superstructure above plinth level upto floor Three Level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)(B-5.44.4) |
6 | Add extra for Square or Rectangular Pillars in Superstructre Flyash Brick work up to Three storey Upto 45 cm length and all sides are free (B-5.45.1) |
7 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished. |
8 | (A) 20mm thick. (B-12.9.2) |
9 | (B) 12mm thick. (B-12.9.3) |
10 | Dismantlingsteelworkinsinglesectionsincludingdismemberingandstackingwithin50 meters lead in:Channels, angles, tees & flats.(B-14.17.2) |
11 | Dismantling barbed wire or chain link fencing including bending making rolls and stacking within 50-meter lead..(B-14.36) |
12 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. (B-9.1) |
13 | Add or deduct for each wire line over basic itemExtra for using galvanized barbed wire instead of black barbed wire. Add Extra ifbarbed wire fencing is done on wall upto height of 3.00 Mtr.(B-9.59+9.61.1+9.61.2) |
14 | Drilling holes in rails, joist or M.S. plate..(B-9.6) |
15 | Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron "Y" shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra)(B-9.65) |
16 | Refebrication work with existingsteel work including cutting, welding & refebrication as per requirement with fixing at site complete as per direction of Engineer In charge(B/13.44) |
17 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : |
18 | (A) Two or more coats on new work(B-12.68.1) |
19 | (B) Old work (One or more coats).(B/12.68.2) |
20 | Pointingonstonemasonryincementsandmortar 1:3 (1 cement : 3 sand) Raised and cut pointing.:(B-12.36.2) |
21 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone.:(B-13.1) |
22 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shadetogive an even shade including all scaffolding: |
23 | (A) Two or more coats on new work(B-12.53.1) |
24 | (B) Old work (One or more coats).(B/12.53.2) |
25 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide : Extra if square,rectangular hollow tubularsections are used or grill made by flats only(B-9.18+ 9.19) |
26 | Supply and installation of Multi Rib Proofing /Cladding Sheet Manufacture out of 0.50mm TCT( Total Coated thickness) high tensile Zinc aluminum alloy coated galvaiume steel ( as per 150gsm zinc aluminum coated 550Mpa yield strength)confirming to IS: 1397/astm A -792 sheet to have wide pens 30mm high nb at 250centre and centre width of 1020 mm shets be casted with regular modifedpolyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have propportionality with siphoned plate atmade at to prevent lrakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12 mts with all scaffolding.(B-17.1) |
27 | Repair to cement plaster in cement mortar 1 : 6 (1 cement : 6 fine sand) including removal of old plaster in regular shape and white or colour washing.(B-13.4) |
28 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor Three level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc.(B-4.11.2) |
29 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size).(B/3.2.1) |
30 | Renewing glass panes, with putty and nails wherever necessary: |
31 | (A) Float glass panes of thickness 4 mm (B-13.17.1) |
32 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete.(B-13.39) |
33 | LABOUR charges for repair to door / window without using any MATERIAL such as applying randha (finishing) tightening of bolts & screw etc.(B/13.40) |
34 | Repair to damaged cement plaster of stone chajja with CM 1 : 3 of required thickness on top &bottom as per existing pattern and making patta etc complete up to three floor level as per direction of Engineer in charge including all necessary scoffolding etc(B-13.47) |
35 | Repairofdoor,windowshuttersincludingcostofMATERIALandLABOURforchangeofdamaged :(B/13.49) |
36 | (A) (B)Shuttering Ply - 9mm thick (Commercial)Panel by b (i) |
37 | (B)Wire Gauge 14 mesh x 24 gauge |
38 | (C)Aldrop of mild Steel12" long x12mm dia |
39 | (D) Stopper of Aluminium with Double Rubber Gutka |
40 | (F) Steel Hinges For Wooden Chowkhat 4" size |
41 | (H)Steel Locking Bolt Steel Handle 6" size |
42 | Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth complete(B-15.61) |
43 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect.(B-12.67.1) |
44 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:Newwork(twoormorecoats)overandincludingscrappingandprimingcoatwithcement primer.(B-12.51.1) |
45 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ).(B-12.48) |
46 | Mechanised cleaning of storage tanks comprises of following 6 stage as mentioned below : 1. Mechanical dewatering 2. Desalting removal of leftover dirty water and sludge with sludge pump 3. Cleaning of wall, ceiling and floor by high pressure water jet with help of equipments which creates a pressure of 100-150 bar 4. Removal of remaing sludge from floor with the help of industrial vacuum cleaner. 5. Spraying of non toxic, bio degradable ecofriendly and bacterial agent certified by a govt approved LABOrary to disinfect the tank from all harmfull pathogens. The dose should be safe as per the UECD guidelines & 23 adopted on 17 th december 2001. 6. Treatment of inside tank by exposing UV radiation to kill further suspended or floating bacteria if any |
47 | (A) Upto 500 ltr.(B-13.48.1) |
48 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure "A":30 mm thick .Commercial Veneer both side(B-8.18.2) |
49 | Applying priming coat :With ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood.(B-12.55.1) |
50 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. (B4.10) |
51 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level.Cold twisted deformed bars (IS : 1786). (B-4.12.2) |
52 | Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix(B-4.1) |
53 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide : (B-9.18) |
54 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.)(B:10.50.2) |
55 | Supply of different varieties of rose plants in poly bag/ earthen pot according to height growth and age of the plant at site including loading unloading and transportation etc. complete Different varieties of drafted rose plants in poly pot/earthen pot (H/1.13.4) |
56 | Supply of different sized pots at site store including loading unloading & transportation etc. complete.Cement pot 450 mm size.(H-1.6.4) |
57 | Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc.complete.Different flowering plants 900mm to1500mm (H/1.11.1) |
58 | Supply of different varieties of palms in poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. completeFox talepalm 5 to 8 feet(H/1.14.6) |
59 | Supply of different varieties of indoor plantsin poly bags/earthen pot according to height growth and age of plant at site including loading unloading and transportation etc. complete. |
60 | (A)Selective varieties of crotons 2 to 3 feet (H/1.16.2) |
61 | (B)Song of India 1.5 to 2.5 feet(H/1.16.6) |
62 | (C)Aglonmia 1.5 to 2 feet(H/1.16.7) |
63 | Random rubble dry stone Kharanja under floor.(B-11.44) |
64 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete :300mm dia Internal (S-3.8.5) |
65 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable MATERIAL within 50 metres lead as per direction of Engineer-in-charge. (B-14.3) |
66 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand(B/1.32) |
67 | Polished Blue Kota stone flooring skirting, laid over 20 mm thick base of C.M. 1 : 4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete : |
68 | For area of each slab from 2001 to 5000 Sq.Cm : 25 mm thick slab.(B-11.35.3) |
69 | For area of each slab upto 900 Sq.Cm : 25 mm thick slab.(B-11.35.1) |
70 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete.50mmthickwith20mmthicknominalsizeaggregate.(B:11.3.3) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail