Military Engineer Services-MES has published Repair And Maint Of Summer Appliances And Other Connected Work At Tbrl Range Ramgarh And Chandigarh Area Under Ge ( I ) R And D Chandgiarh. Submission Date for this Tender is 12-09-2022. Air Conditioner Tenders in Ramgarh Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-09-2022 |
| Sl. No. | Item Description |
| 1 | SECTION-I (RAMGARH AREA) Providing services for attending all types of day to day complaints of maintenance, repair, replacement of unserviceable worn out spare parts, overhauling including soldering, spraying, chemical cleaning with detergents, leak repairing, charging fresh refrigerant, dismantling, reassembling and periodical services in respect of all make, work & type of cooling appliances i.e., Air Conditioners (window type, split type, cassette type and ductable type) , water coolers , desert coolers and voltage stabilizers installed at various labs/locations in TBRL range Ramgarhby providing skilled qualified refrigerator mechanic cum electrician with helper per day alongwith required tools/equipments/machine/test kits/gas filling gauge, gas charging adopter, gas charging valve, drill machine with drill bit, allen key set, ladders, ropes ,clamp meter, brazing rod, butane gas cylinder, tape roll, vacuum pump, suction discharge valve, washing pump, spanner set, copper tube cutter, flaring tool, &other instruments which are required for maintenance, repair and to make the equipment functional and for keeping all equipments in perfectly clean, tidy and functional condition in all times . The complaints record to be maintained on the complaint register & complaint slips completed all as specified and directed. Note: (i) Cost of spares including refrigerent for charging and rewinding /replacement of condensor fan motors,compressor,blower fan etc if required shall be measured and paid seperately under respective item of sch"A" (ii) 01x refmechanic and 1 x helper to be provided from 0900 hrs to 1700hrs. (iii) Non attending of complaints will be recovered @ Rs 250 per complaint |
| 2 | Supply only in replacement of starting relay for split type AC units of capacity 2 TR as required at site completed all as specified and directed. |
| 3 | Supply only in replacement of starting capacitor 80-100/100-120 mfd for split type A/C"s of capacity1.5TR/2 TR completed all as specified and directed. |
| 4 | Supply only in replacement of running capacitor 30/36 mfd for split type AC unit as required at Site completed all as specified and directed. |
| 5 | Supply only capcitor 10 MFD suitable for Air conditioner/ water cooler |
| 6 | Supply only in replacement of contactor, as per existing model, coil voltage 230V installed in split type AC units completed all as specified and directed. |
| 7 | Rewinding/replacement of bush/bearings condenserfan motor of split type AC units of capacity 1.5 TR/2 TR completed all as specified and directed. |
| 8 | All as per serial item No 7.00 above but blower motor |
| 9 | Supply only in replacement of indoor unit blower suitable for Split AC Capacity 1.5 / 2.0 TR |
| 10 | Disconnecting and taking down burnt compressor of capacity 2TR from split type AC unit and replacingthe same with new one from the company as per existing model completed all as specified and directed. |
| 11 | Disconnecting and taking down burnt compressor of capacity 1.5TR from split type AC unit and replacingthe same with new one from the company as per existing model completed all as specified and directed. |
| 12 | Supply only the new remote control unit (cordless)as per existing model for 1.5 TR/ 2 TR split type A/C unit completed all as specified and directed. |
| 13 | Supply only the new blower motor for split type A/C unit of capacity 1.5/2.0TR as per existing model completed all as specified and directed. |
| 14 | Supply only in replacement of air filter for split type A/C units of capacity 1.5 TR/2 TR as per sample completed all as specified and directed. |
| 15 | Material only for providing insulation to copper tubing’s from Indoor to outdoor units with foam insulation followed with PVC flexible pipe 50mm with clamps completed all as specified and directed. |
| 16 | Supply only of gas R-22 completed all as specified and directed. |
| 17 | Supply only of gas R-32 completed all as specified and directed. |
| 18 | Supply only of gas R-134A completed all as specified and directed. |
| 19 | Supply only of gas R-410A completed all as specified and directed. |
| 20 | Supply only of copper tubing 3/8” outer dia suitable for AC 1.5TR/ 2TR capacity completed all as specified and directed. |
| 21 | All as per serial item no 19.00 above but 5/8” outer dia. |
| 22 | All as per serial item no 19.00 above but 1/2” outer dia |
| 23 | All as per serial item no 19.00 above but 1/4” outer dia. |
| 24 | Supply only condenser fan blade for split AC 1.5/2.0 TR |
| 25 | Supply only drain hose pipe of length 05 meter for air conditioner/ water cooler complete all as specified and directed. |
| 26 | Supply only PCB of cooling unit of split AC 1.5TR/2.0TR complete all as specified and directed |
| 27 | Supply, installation and testing of printed control board of indoor unit and outdoor unit both of cassette type AC (inverter type) Cap 2.5 TR as per sample completed all as specified and directed. |
| 28 | Supply, installation and testing of printed control board of indoor unit and outdoor unit both of cassette type AC (inverter type) Cap 4.0 TR as per samplecompleted all as specified and directed. |
| 29 | Supply only in replacement of thermostatas required at site completed all as specified and directed. |
| 30 | Supply only in replacement of overload protector for compressor as reqd at site for AC 1.5/2.0TR completed all as specified and directed. |
| 31 | Supply only in replacement of starting relay as requiredat site for water coolers complete including connecting, testing completed all as specified and directed. |
| 32 | Disconnecting and rewinding of condensermotor single phase of 1/16 HP for water coolers & refixing the same with clamps bolts, nuts and rubber bushes including connecting, testing completed all as specified and directed. |
| 33 | Supply only in replacement of waste water tray as required at site made out of 20 gauge GI sheet complete with PVC drain pipe including painting with PVC drain pipe including painting with aluminum paint completed all as specified and directed. |
| 34 | Supply only in replacement of brass float valves accessories 15mm size as required at site completed all as specified and directed. |
| 35 | Disconnecting and taking out compressor ("R type) from water cooler and fixing new including flushing dehydration and gas charging completed all as specified and directed. |
| 36 | Supply only self closing taps of cast iron galvanised, chromium plated screwed for iron pipe suitable for water coolers completed all as specified and directed. |
| 37 | Supply only in replacement of starting capacitor 100/120 mfd for compressor completed all as specified and directed. |
| 38 | Supply only in replacement of new condenser motor single phase of 1/16 HP as required at site for water cooler with clamps, bolts, nuts & rubber bushes complete including connecting testing acompleted all as specified and directed. |
| 39 | Supply and fixingonly Distribution box with plug and socket & 20 A DP with plastic cover completed all as specified and directed. |
| 40 | Supply only in replacement the new desert cooler pump. including testing for proper functioning completed all as specified and directed. |
| 41 | Supply only in replacement desert cooler moter single phase, 50 Hz, 250 Volt, 180 W, 1400 RPM completed all as specified and directed. |
| 42 | Fixing only Geysers including grouting of fastners and inlet / outlet with elect /water connection completed all as specified and directed.. ( Gysers will be issued under Sch B) |
| 43 | Supply only in replacement new body of desert cooler as per sample duly painted of 20 SWG sheet with 22 SWG flops, front grill, PVC pipe, nozzle, distributor and nut bolts washers for fixing fanclamps, completed all as specified and directed. |
| 44 | Taking down and rewinding of exhaust fan/kit of desert cooler with super enameled copper winding wire including replacement of bush completed all as specified and directed.. |
| 45 | Supply only front grill of desert cooler as per sample completed all as specified and directed. |
| 46 | Supply only PVC distributor heavy duty as per sample completed all as specified and directed. |
| 47 | Supply only in replacement plug top 5 Amps completed all as specified and directed. |
| 48 | Supply only in replacement plug top 15 Amps completed all as specified and directed. |
| 49 | Taking out worn out existing 6mm/3mm thick ply wood and S&F 6.0 mm thick ply wood for making air tight of desert coolers/air conditioners completed all as specified and directed.. |
| 50 | Supply only PVC flexible pipe 15mm bore heavy duty for desrt cooler completed all as specified and directed. |
| 51 | Supply only in replacement of air filter of w/AC 1.5 TR capacity Make-Coir foam or equivalent as required at site completed all as specified and directed. |
| 52 | Supply only in replacement starting relay for W/T AC as required at site completed all as specified and directed. |
| 53 | Supply only in replacement of starting capacitor 80Mfd for A/C 1.5 TR as required at site completed all as specified and directed. |
| 54 | Supply only in replacement of running capacitor for 30/36 mfd for AC window type 1.5 TR as required at site completed all as specified and directed. |
| 55 | Supply only in replacement of capacitor 50+6 mfd for AC as required at site completed all as specified and directed. |
| 56 | Supply only in replacement of capacitor 40/45 mfd for AC as required at site completed all as specified and directed. |
| 57 | Supply only in replacement of capacitor 10 mfd for AC as required at site completed all as specified and directed. |
| 58 | Supply only in replacement of capacitor 5.0 mfd for desert/water cooler as required at site completed all as specified and directed. |
| 59 | Supply only in replacement of capacitor 4 mfd for desert/water cooler as required at site completed all as specified and directed. |
| 60 | Supply only in replacement selector switch as required at site completed all as specified and directed. |
| 61 | Supply only in replacement of over load protector for 1.5/2.0 TR W/AC completed all as specified and directed. |
| 62 | Supply only in replacement ofblower motoras required at site for W/Ac single phase 230 volts double shaft with clamp bolts, nuts and rubber bushes completed all as specified and directed. |
| 63 | Supply only in replacement of thermostats as required at site complete for window type AC 1.5 TRall completed all as specified and directed. |
| 64 | Disconnecting and taking down compressor 1.5 TR W/AC as per existing make and Refixing the same after replacing with new one including flushing, dehydrationand gas changing completed all as specified and directed. |
| 65 | Disconnecting and taking down compressor 2.0 TR W/AC as per existing make and Refixing the same after replacing with new one including flushing, dehydrationand gas changing completed all as specified and directed. |
| 66 | Disconnecting & taking down of window type AC 1.5 TR of any make and refixing the same after replacement of cooling coil including soldering/welding dehydration completed all as specified and directed. |
| 67 | Supply & fixin replacement of Blowerof Window AC capacity 1.5 / 2.0 TR completed all as specified and directed. |
| 68 | Disconnecting & taking down of window type AC of any capacity and Refixing the same after replacement of condenser coil including soldering/weldingand commissioning completed all as specified and directed. |
| 69 | Supply only copper capillary Tube for refigerator asper existing |
| 70 | Supply only magnetic door gasket for refigerator as per existing |
| 71 | Supply only chiller tray PVCfor refigeratoras per existing |
| 72 | Supply only chiller tray PVCfor refigeratoras per existing |
| 73 | Supply only vegetable tray PVC for refigeratoras per existing |
| 74 | Supply only Aluminium grill rack PVC Coated) |
| 75 | Supply only hermitically sealed compressor unit comprising of the compressor coupled with inbuilt AC single phase 230V motor and other standard compressor accessories complete for refrigerator of 165 ltrcapacity |
| 76 | Supply only anti vibration pad for compressor mountings suitable for refrigerator, water cooler and air conditioner compressors completed all as specified and directed. |
| 77 | Servicing and minor repair if any to voltage stabilizer of capacity 5 KVA. |
| 78 | Servicing and minor repair if any to voltage stabilizer of capacity 4 KVA. |
| 79 | Supply onlyPVC insulated copper conductor cable of size 3 core, 1.0 sqmm, 1100 volt grade completed all as specified and directed. |
| 80 | Supply onlyPVC insulated copper conductor cable of size 3 core, 1.5 sqmm, 1100 volt grade completed all as specified and directed. |
| 81 | Supply only PVC insulated copper conductor cable of size 3 core, 2.50sqmm, 1100 volt grade completed all as specified and directed. |
| 82 | Taking outof old, unserviceable worn out existing mild steel standwith welding of replace the rusted anlges of any size and replacementof MS stand of suitable size fabricated out of angle iron alongwith 02 Nos legs duly grouted on walls of the buildingnear window and 02 Nos diagonal angle iron supports duly welded to frame and legs and painted with two coat of synthetic enamelled paint over a coat of red oxide primer completed all as specified and directed. |
| 83 | Material and labour for shifting of AC"s any type/capacity from any height & location and refix the same on another location after making necessary cutting on wall/roof/window/glass/grills as per requirement of users, complete all as specified and as directed.(Note:- Necessary insulation for copper tubing,gas filling,ply work shall be measured and paid seperately under respective item) |
| 84 | Taking down carefully by sub main wiring/service connection of any type completed all as specified and directed. |
| 85 | Material and labour for sub main wiring with two runs of single core, PVC insulated, unsheathed ,multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade and one run of 4.0 Sqmm PVC insulated earth continuity copper conductor cable drawn through and inculding suitable size of PVC concealed conduit with all necesary accessories such as bends, tees, junctions boxes, elbows etc complete with all in coming and out going cable connections complete all as specified and as directed. (Note : Two runs of 4 Sqmm cable, one run of 4.0 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one unit length). |
| 86 | Supply and fixing in replacement PVC connections 15 mm size with PTMT nuts of length 450 mm suitable for Water coolers/Geysers completed all as specified and directed. |
| 87 | Supply and fixing in replacement PVC connections 15 mm size with PTMT nuts of length 600 mm suitable for Water coolers/Geysers completed all as specified and directed. |
| 88 | Supply and fixing in replacement stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle, fancy type and chromiun plated screwed both ends for iron pipe or for unions all as specified and as directed of size 15 mm bore , completed all as specified and directed. |
| 89 | Supply and Fixing in replacement 15 mm nominal size, screw down bib taps, cast copper alloy with crutch or butterfly handle screwed down, fancy type, chromium plated completed all as specified and directed. |
| 90 | Supply and Fixing in replacement of apparatus plate (Geyser Assembling Unit) with rubber gasket including nuts, bolts and washers consisting of 6 Nos of holes suitable for existing geysers completed all as specified and directed. |
| 91 | Taking down ceiling fan any type & size (including flameproof) from its position by isolating electric connection carefully down from existing point refixing the same to in original position after carrying out repairs completed all as specified and directed. Note :- i) Repairs will be measured and paid separately ii) Rate deemed to inclusive of replacement of new flexible copper wire between ceiling rose to fan connector. iii) Rate deemed inclusive provn of split pin, lock pin, rubber shackle, PVC connector, nut & bolt. |
| 92 | All as per serial item no 87.00 above but for exhaust fan/air circulator/wall mounted fan of any size/make and capacity. Note :- i) Repairs will be measured and paid separately ii) Rate deemed to inclusive replacement of rubber bushes for exhaust fan. |
| 93 | Opening up of fan motor of fan, cleaning stator, rotor, cleaning of all parts greasing oiling of bushes and bearing reassembling and testing for smooth functioning (including flameproof) for celling fan 1200/1400 mm sweep |
| 94 | All as per serial item no 88.00 above but Exhaust fan 300/ 375/ 450mm sweep |
| 95 | All as per serial item no 88.00 above but Wall/cabin fan 300/400 mm sweep |
| 96 | All as per serial item no 88.00 above but Table/pedastal fan 400 /600/750 mm sweep |
| 97 | Material and labour for rewinding of the ceiling fan of 1200 mm to 1400 mm sweep of any type & make with same gauge of super enamelled copper conductor of good insulation, varnishing, heating up (including flameproof) and removing the old defective winding carefully cleaning the inner parts and reassembling complete all as specified and directed |
| 98 | Material and labour for replacement of defective ball bearing for ceiling fan / table fan / pedestal fan or Air-circulators fan of any size and sweep 6201/6202. |
| 99 | Material and labour for replacement of defective ball bearing for ceiling fan / table fan / pedestal fan or Air-circulators fan of any size and sweep 6203/6204. |
| 100 | Material and labour for replacement of defective capacitor of capacity 2.5 to 3.15 mfd for any type of fans suitable for 250 V including making connection complete all as specified and directed. |
| 101 | All as per serial item 92.00 above but4.0 Mfd. |
| 102 | Material and labour for replacement of gun metal bush suitable for 1200 mm to 1400 mm sweep ceiling fan complete all as specified and directed. |
| 103 | Material and labour for replacement offan regulator, five steps, electronic rotary type 230/240 Volts suitable for 120/280W complete with all fixing accessories including necessary electric connection all as specified and directed. |
| 104 | Supply and fixing in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 105 | Supply only of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with brushless direct current motor (BLCD). |
| 106 | Supply only thermostst 7"/11" for geyser with adjustable temperature setting range complete all as specified and directed. |
| 107 | Butane cylinder 230 Gram for brazing rod welding |
| 108 | Brazing rod for copper tubes welding |
| 109 | Sucton valve with dead end cap at outdoor unit of split type air conditioner 1.5/ 2.0 TR |
| 110 | Discharge valve with end cap at outdoor unit of split type air conditioner 1.5/ 2.0 TR |
| 111 | SECTION-II (CHANDIGARH AREA) Providing services for attending all types of day to day complaints of maintenance, repair, replacement of unserviceable worn out spare parts, overhauling including soldering, spraying, chemical cleaning with detergents, leak repairing, charging fresh refrigerant, dismantling, reassembling and periodical services in respect of all make, work & type of cooling appliances i.e., Air Conditioners (window and split type AC ) , water coolers , desert coolers,fridge,Geysers and voltage stabilizers off capacity installed at various labs/locations in Chandigarh areaby providing skilled qualified refrigerator mechanic cum electrician with helper per day alongwith required tools/equipments/machine/test kits/gas filling gauge, gas charging adopter, gas charging valve, drill machine with drill bit, allen key set, ladders, ropes ,clamp meter, brazing rod, butane gas cylinder, tape roll, vacuum pump, suction discharge valve, washing pump, spanner set, copper tube cutter, flaring tool, &other instruments which are required for maintenance, repair and to make the equipment functional and for keeping all equipments in perfectly clean, tidy and functional condition in all times . The complaints record to be maintained on the complaint register & complaint slips all as directed. Note: (i) Cost of spares including refrigerent for charging and rewinding /replacement of condensor fan motors,compressor,blower fan etc if required shall be measured and paid seperately under respective item of sch"A" (ii) 01x refmechanic and 1 x helper to be provided from 0900 hrs to 1700hrs. (iii) Non attending of complaints will be recovered @ Rs 250 per complaint |
| 112 | Supply only in replacement of starting relay for split type AC units of capacity 2 TR as required at site complete all as specified and directed. |
| 113 | Supply only Refrigerant gas R 22 inair conditioner at different site as required including brazing and removal of leakage in equipment |
| 114 | Supply only Refrigerant gas R 32 inair conditioner at different site as required including brazing and removal of leakage in equipment |
| 115 | Supply only Refrigerant gas R 134a inrefrigerators/water coolers at different site as required including brazing and removal of leakage in equipment |
| 116 | Material and labour for repair to wall mounted Stablizer of capacity 3 KVA including Fuze assy, terminal panels, indicators, time delay relay and 3 core PVC lead and re-assembling and fixing in position complete all as specified and directed. |
| 117 | Material and labour for repair to wall mounted Stablizer of capacity 5 KVA including Fuze assy, terminal panels, indicators, time delay relay and 3 core PVC lead and re-assembling and fixing in position complete all as specified and directed. |
| 118 | Supply and fixing for single pole and neutral enclosure with a two pin and socket complete with one single pole MCB SPN 240 volts, 20 Amps |
| 119 | Supply only aluminium fan blade suitable for condenser of window type AC of any capacity. |
| 120 | Supply onlyPVC fan blower of cooling side of window type AC of any capacity complete all as specified and directed. |
| 121 | Supply only wiring kit of split type AC complete with lugs, thimble and selector switch, complete all as specified and directed. |
| 122 | Supply only condensing fan motor for window type AC of 1.5/2 TR capacity,complete all as specified and directed. |
| 123 | Supply only blade for condensing fan motor for Split type AC of any capacity complete all as specified and directed. |
| 124 | Supply only capacitor 45 Mfd for split type Ac of capacity 1.5/02 TR. |
| 125 | Supply only capacitor 6 Mfd for condensing fan motor of Split type AC of capacity 1.5/02 TR. |
| 126 | Supply only capacitor 2.5 Mfd indoor blowert motor of capacity 1.5/02 TR |
| 127 | Supply only running capacitor, 36 Mfd suitable for split type AC of capacity 1.5/02 TR complete all as specified and directed. |
| 128 | Supply only starting capacitor, 100-120 Mfd suitable for split type AC of capacity 1.5/02 TR complete all as specified and directed. |
| 129 | Supply only cooling fan motor of capacity 1/30 or 1/35 HP for split type AC of capacity 1.5/02 TR complete all as specified and directed. |
| 130 | Supply only compressor sealed unit of existing make from water cooler of capacity 40/80 ltr incl jointing of copper refrigerent pipe line charging gas to required level including testing for smooth functioning complete all as specified and directed. |
| 131 | Supply only compressor sealed unit of existing make from water cooler of capacity 60/120 ltr incl jointing of copper refrigerent pipe line charging gas to required level including testing for smooth functioning complete all as specified and directed. |
| 132 | Supply only compressor sealed unit of existing make for split type AC of capacity 1.5 TR after cutting copper tubing without any damage to existing parts complete all as specified and directed. |
| 133 | Supply only compressor sealed unit of existing make for split type AC of capacity 02 TR after cutting copper tubing without any damage to existing parts complete all as specified and directed. |
| 134 | Supply only aluminium fan blade for water cooler off capacity complete all as specified and directed. |
| 135 | Supply only thermostat suitable for water cooler off capacity complete all as specified and directed. |
| 136 | Supply only waste water tray, stainless steel with coupling suitable for water cooler off capacity complete all as specified and directed. |
| 137 | Supply only PVC drain out flexible pipe of 20mm dia 70 cms length with two mild steel clamps and necessary brass screws etc for water cooler of any size complete all as specified and directed. |
| 138 | Supply only push cock 15mm bore made out of brass chromium plated self closing vertical/angle type complete all as specified and directed. |
| 139 | Supply only freezer unit of refrigerator capacity 165/170/175 ltrs of existing make including jointing, brazing, recharging of refrigerator gas and testing for smooth functioning. complete all as specified and directed. |
| 140 | Supply only bulb for pin/screw type 230 Volts suitable for refrigerator 165 to 310 ltrs capacity. |
| 141 | Supply only PVC flexible pipe 16mm outer dia complete with PVC elbow etc. |
| 142 | Supply only selector switches three way 230 Volts single phase of standard quality for desert coolers. |
| 143 | Supply honney pad (set of three) fixed in side panels of desert coolers complete all as specified and directed. |
| 144 | Supply only switch piano type 250 Volts, single pole one ways 5 amps, fixed in desert coolers. |
| 145 | Supply only PVC insulated and PVC sheathed round flexible three core copper conductor cable of size 40/0.0076 Sqmm including necessary connection fixed in desert coolers. complete all as specified and directed. |
| 146 | Supply only capacitor 4 Mfd for fan motors of desert coolers complete all as specified and directed. |
| 147 | Supply only submerssible pump 230 volts suitable for desert cooler of capacity 4000/5000 including necessary wiring complete all as specified and directed. |
| 148 | Supply only side shutter (set of three) made out from 24 guage thick galvanized iron sheet suitable for 4000/5000 cum/hrs capacity desert coolers complete all as specified and directed. |
| 149 | Supply only float valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball, screwed for 15mm bore iron pipe, weight not less than 142gm/each. complete all as specified and directed. |
| 150 | Supply only Aluminium fan blade for fan motor of desert cooler 20 inch sweep complete all as specified and directed. |
| 151 | Supply only PVC, 3 way distributor suitable for 15 mm pipe with nut/screws complete all as specified and directed. |
| 152 | Supply only desert cooler body complete suitable for 4000 Cum/hr complete all as specified and directed. |
| 153 | Supply only desert cooler fan motor 3 speed copper winding ISI mark including suitable legs set of three including nut bolt washercomplete all as specified and directed. |
| 154 | Supply only the new remote control unit (cordless)as per existing model for 1.5 TR/ 2 TR split type A/C unit complete all as specified and directed. |
| 155 | Supply only in replacement of air filter for split type A/C units of capacity 1.5 TR/2 TR as per sample complete all as specified and directed. |
| 156 | Supply only for foam insulation copper tubing from Indoor to outdoor units with clamps complete all as specified and directed. |
| 157 | Supply only of copper tubing 3/8” outer dia suitable for AC 1.5TR/ 2TR capacity complete all as specified and directed. |
| 158 | Supply only of copper tubing 5/8” outer dia suitable for AC 1.5TR/ 2TR capacity complete all as specified and directed. |
| 159 | Supply only of copper tubing 1/2” outer dia suitable for AC 1.5TR/ 2TR capacity complete all as specified and directed. |
| 160 | Supply only PCB of cooling unit of split AC 1.5TR/2.0TR complete all as specified and directed. |
| 161 | Supply only in replacement of overload protector for compressor as reqd at site for AC 1.5/2.0TR complete all as specified and directed. |
| 162 | Supply only in replacement of starting relay as requiredat site for water coolers complete including connecting, testing complete all as specified and directed. |
| 163 | Supply only in replacement of new condenser motor single phase of 1/16 HP as required at site for water cooler with clamps, bolts, nuts & rubber bushes complete including connecting testing complete all as specified and directed. |
| 164 | Supply only in replacement plug top 5 Amps complete all as specified and directed. |
| 165 | Supply only in replacement plug top 15 Amps complete all as specified and directed. |
| 166 | Supply only Copper capillary Tube for refigerator off capacity. |
| 167 | Supply only Magnetic door gasket for refregerator off capacity. |
| 168 | Supply only anti vibration pad for compressor mountings suitable for refrigerator, water cooler and air conditioner compressors complete all as specified and directed. |
| 169 | Supply & Fixing in replacement PVC connections 15 mm size with PTMT nuts of length 450 mm suitable for Water coolers/Geysers complete all as specified and directed. |
| 170 | Supply & Fixing in replacement PVC connections 15 mm size with PTMT nuts of length 600 mm suitable for Water coolers/Geysers complete all as specified and directed. |
| 171 | Supply only thermostst suitable for existing geyser with adjustable temperature setting range complete all as specified and directed. |
| 172 | Fixing only split type AC of capacity 1.5/2 TR at various locations at chandigarh (sch "B") |
| 173 | Fixing only Condensor coil of capacity 02 TR complete all as specified and directed. |
| 174 | Fixing only Condensor coil of capacity 1.5 TR complete all as specified and directed. |
| 175 | Fixing only cooling coil of capacity 02 TR complete all as specified and directed. |
| 176 | Fixing only cololing coil of capacity 1.5 TR complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
