Military Engineer Services-MES has published Provision Of Toilet And Bathroom Set For Offices And Duty Clk In 114 Inf Bn ( Ta ) Jat, Fatehgarh Cantt. Submission Date for this Tender is 03-09-2022. Toilet Bathroom Tenders in fatehgarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-09-2022 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches in soft/loose soiln.exc. 1.5m wide and n.exc. 1.5 m depth for foundation etc & getting outall as specified. |
| 2 | M&L cement concrete 1:4:8Type D2 ( 40 mm graded aggregate) as in foundation,filling and mass concrete complete all as specified and directed. |
| 3 | M & L Brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed. |
| 4 | M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed. |
| 5 | M & L RCC Type B1 1:2:4 (using 20 mm graded stone aggt) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. |
| 6 | M&L for Reinforced Cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in beams, cantilevers, bressumers, lintels bandcomplete all as specified and directed. |
| 7 | M&L for RCC 1:2:4 type B-1 (using 20mm graded aggregate) slab supported on walls ,columns in floors, roofs landings, balconies canopies deck slab and in the shelves and the like, complete all as specified and directed. |
| 8 | M & L for form work as in sides of columns etc complete all as specified and directed. |
| 9 | M & L for form work as in roof beams,sides of suspended slabs etc complete all as specified and directed. |
| 10 | M & L for Use and waste of Form work to soffits of of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200cm thick (Horizontal or sloping)complete all as specified and directed. |
| 11 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batteretc complete all as specified and directed. |
| 12 | S&F mild steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for coloumn , hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed |
| 13 | S&F mild steel TMT bars 05mm dia and over and including 10mm dia as in stirrups, cut to length bent to shape required including cranking bending spirally for hooping for coloumn , hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed |
| 14 | M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement. |
| 15 | M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement. |
| 16 | M & L Rendering 5mm thick in CM (1:3) on fair faces of ceilling concrete surfaces to be finished even and smooth without using extra cement. |
| 17 | M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete. |
| 18 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as spfd and directed. |
| 19 | Spreading, levelling and well ramming to excavated soil including watering as required in layers n exc. 25 cm thick Note :(Soil taking from item No-1) |
| 20 | M&L broken bricks hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rolled/ rammed to a true surfaces complete all as specified and directed. |
| 21 | M&L Cement concrete type D-2 , 1:4:8 (40 mm graded aggregate) 100 mm thick in sub floor complete all as specified and directed. |
| 22 | M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete. |
| 23 | M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint including over a coat of alkali resistant primer complete all as specified and as directed. |
| 24 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete. |
| 25 | S&F15mm bore Chromium plated Bib taps fancy type, cast copper alloy , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 26 | S&F 600mmx450mm bevelled edge looking Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with aluminum beading on sides fixed to walls with screws complete all as specified and directed. |
| 27 | S&FVitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed |
| 28 | S&Fvitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)including all fittings complete all as specified and as directed . |
| 29 | S&F Vitreous China Urinals flat back of size 465 x 355 x 265 mm, bowl type including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass srews and pointing around urinal back in cement and union for discharge pipe including fixing supply pipe and waste pipe, waste couplingcomplete all as specified and directed. |
| 30 | S&F 15 mm bore ,Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated with long shank and cup (concealed type)complete all as specified and directed. |
| 31 | S&F 15 mm bore ,Stop valves angle cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and directed. |
| 32 | S & F 15 mm bore brass chromium plated showe rose 125mm size with shower arm complete all as specified an directed by Engineer - in - Charge . |
| 33 | S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed. |
| 34 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified |
| 35 | S & F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 36 | S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples,wodden beads to steel windows/wodden doors. |
| 37 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 38 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for top rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing. |
| 39 | S&F aluminium anodised butt hinges of size 100mm medium weight. |
| 40 | S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed. |
| 41 | S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed. |
| 42 | S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete. |
| 43 | S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed. |
| 44 | All as per item above but of size of 20mm bore |
| 45 | S&F 110 mm bore PVC (SWR) pipes single soketed in any length with rubber ring joints, laid in trenches or in floorcomplete all as specified and directed. |
| 46 | S&F 110 mm bore PVC (SWR) bends fixed to wall. |
| 47 | S&F 110mm PVC (SWR) floor trap ,plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 48 | S&F PVC (SWR) gully trap 125/110 mm with grating andsetting with cement concrete and jointing with solvent cementcomplete all as specified and directed. |
| 49 | Cutting into exisiting manholes for 150mm bore pipe for connecting new drains, making good to pipe and rendering ,cutting out existing benching for and forming branchchannel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished , and reforming benching as requiredcomplete all as specified and directed. |
| 50 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 1000 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I complete all as specified and directed. |
| 51 | M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregates as in plinth protection, subbase of floors complete |
| 52 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft /loose soilcomplete all as specified and directed. |
| 53 | Returning filling including spreading, leveling, watering and well ramming in layers n.exc. 25cm for soft/loose soil complete all as specified. |
| 54 | Removing excavated materials (soil) not exc 0.50m and depositing where directed of a level not exc 1.5m above the starting point. |
| 55 | M & L 150mm dia (internal) salt glazed stoneware drain pipes laid in trenches and jointed complete with collars all as specified and directed. |
| 56 | M&L for Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia (internal) after these are laid in trenches all as specified and directed. |
| 57 | M&L for point wiring of one light/fan/bell/exhaust fan point controlled by one switch with 1100 volt grade PVC insulated-unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable, with continuous earth wire of 1.5 Sq mm (FRLS) multistrandedcopper conductor cable PVC insulated-unsheathed, drawn in & including concealedPVC conduit medium grade with fittings (ISI marked) not less than 19 mm dia & 1.6 mm thick sunken pressed steelgalvanised terminal boxes with top cover 2.80 mm thick ISI marked plastic laminated hylam sheet of required colour for housing/ fixingswitches etc complete all as specified and directed. Note- Cost of cutting chases for concealed wiring and surfaces made good using CM (1:4) and surface finished to match the existing surface shall be included in quoted rate. |
| 58 | Ditto all as above but for one 5 pin 5 Amp switch socket out let point on an independent board. |
| 59 | S&F in replacement switch piano flush type 5 Amp single pole one way complete all as specified and directed. |
| 60 | S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed. |
| 61 | M& L lamp holder PVC/ Polycarbonate type insulatedbody with back plate angle type for batten fittings inclusing 12 LED Buld complete al as pecified & directed. |
| 62 | S & F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 Volts complete all as specified and directed. |
| 63 | S & FMCB distribution board SPN 240 Volt 6 way with 200 Amp rated bus bar having IP-43 protection and double metal door connealed in wall including connection with copper thimbles as reuired complete all as specified. |
| 64 | S & F MCB SPN 16-40 Amp 240 Volt "C" Curve complete all as specifed and directed. |
| 65 | S & F MCB SP 6 to 32 Amp 240 Volt "C"Curve 10 KA complete all as specifed and directed. |
| 66 | Supply & Fix exhaust fans AC single phase 230/240 V of Size 300mm sweep with louvercomplete all as specifed and directed. |
| 67 | S &F surface and wall mounted 18/20W LED extruded alumijnium batten fittir provided for efficient heat dissipationcomplete all as specifed and directed. |
| 68 | S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed. |
| 69 | M&L for earthing complete with galvanised earth plate electrode 60X60 cmX6 mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire, 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 conneted to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Note:- On testing after completion if desired earth ressistence is not obtainde. the earthing will be redone at no extra cost |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
