|
| 1 | Constg. Water supply Schemeat TulshiTal MadhaBhimNagar |
| 2 | Sub work:- Bore Well |
| 3 | Item No 1 :- Drilling 150 mm Dia. Bore with drilling machinary as per G.S.D.A. Certificate...etc. Complete. |
| 4 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 5 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 6 | Item No 4 :- Bore Well Cap |
| 7 | Item No 5 :- Initial Survey of Finalising the point of Bore by G.S.D.A.in Charge officer . |
| 8 | Sub Work :- Pumping Machinery |
| 9 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage |
| 10 | 3.0 HPSubmersible Pump |
| 11 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete. |
| 12 | HDPE 63 mm 6 kg |
| 13 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 14 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts |
| 15 | 3 Core 4 Sq mm |
| 16 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 17 | Sub Work :- Katta & HDPE Tank |
| 18 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 19 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 20 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 21 | Item No. 4 :- Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 22 | Item No.6 :-Providing UCR (1:6 with 30% morter) of genesis stones in cement mortar proportion as below in foundation and plinth of inner walls or in plinth of external walls including bailing out water manually striking out joints on unexposed faces including providing headers/ bond stone as required etc. complete. |
| 23 | Item No.7 :-Providing dry trap / granite / quartzite / gneiss, rubble stone soling in 15cm to 20cm thick layers (including hand packing and compacting) etc. complete |
| 24 | Item No.8 :- Providing and laying in situ cement concrete M10/ M 15 /1:2:4 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing out water manually formwork, compacting, covring newly laid concrete by gunny bag, plastic or tarpaulin, curing etc. complete. |
| 25 | PCC M10 at Foundation |
| 26 | PCC M15 in Plinth |
| 27 | Item No. 10 :- Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 28 | Item No. 11 :- Providing andlaying in situ cc 1.:6 cement pointing .. etc. complete. |
| 29 | Item No. 12 :- Providing & fixing MS angle 35 x 35 x 3 mm size, including cutting & fabricating, as directed by engineer in- charge 3.00 x 4 nos. =12 |
| 30 | Item No. 13 :- GI Sheet 22 BWG Providing supplying GI Sheet . |
| 31 | Sub Work:- Pipe Line |
| 32 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 33 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 34 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 35 | Item No. 4 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 36 | Item No. 5 :- Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores andincluding cost of jointing material i.e. solvent cement, etc. complete. |
| 37 | 75 mm Diam. PVC4 Kg/cm2 |
| 38 | Item No. 6 :- Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. |
| 39 | 75 mm Diam. PVC4 Kg/cm2 |
| 40 | Item No. 7:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 41 | GST 12% |
| 42 | Constg. Water supply Scheme@ TulshiTal MadhaMagaswargiy Wasti Samajmanadir |
| 43 | Sub work:- Bore Well |
| 44 | Item No 1 :- Drilling 150 mm Dia. Bore with drilling machinary as per G.S.D.A. Certificate...etc. Complete. |
| 45 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 46 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 47 | Item No 4 :- Bore Well Cap |
| 48 | Item No 5 :- Initial Survey of Finalising the point of Bore by G.S.D.A.in Charge officer . |
| 49 | Sub Work :- Pumping Machinery |
| 50 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage |
| 51 | 3.0 HPSubmersible Pump |
| 52 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete. |
| 53 | HDPE 63 mm 6 kg |
| 54 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 55 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts |
| 56 | 3 Core 4 Sq mm |
| 57 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 58 | Sub Work :- Katta & HDPE Tank |
| 59 | Item No. 4 :- Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 60 | 3000 Ltr |
| 61 | Item No.8 :- Providing and laying in situ cement concrete M10/ M 15 /1:2:4 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing out water manually formwork, compacting, covring newly laid concrete by gunny bag, plastic or tarpaulin, curing etc. complete. |
| 62 | PCC M15 in Plinth |
| 63 | Item No. 10 :- Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 64 | Item No. 11 :- Providing andlaying in situ cc 1.:6 cement pointing .. etc. complete. |
| 65 | Item No. 12 :- Providing & fixing MS angle 35 x 35 x 3 mm size, including cutting & fabricating, as directed by engineer in- charge 3.00 x 4 nos. =12 |
| 66 | Item No. 13 :- GI Sheet 22 BWG Providing supplying GI Sheet . |
| 67 | GST 12% |
