Construction Of Wooden Bridge At Forest Rest House Jampore At Daman Construction Of Wooden Bridge At Forest Rest House Jampore At Daman
Tender Value
52.34 Lakhs
Estimated cost
Bid Submission
09 Sep 2022
0 days left
EMD
1.04 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
daman → Daman And Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Wooden Bridge At Forest Rest House Jampore At Daman Construction Of Wooden Bridge At Forest Rest House Jampore At Daman
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEM : |
| 2 | Excavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials anddisposing off the excavated stuff at safe place as directed by engineer incharge.(B)Dense or Hard soil. |
| 3 | Excavation for foundation fordepth from1.5 mto3.0 m includingsortingoutandstacking of useful materials anddisposing off theexcavated stuffupto all lift & lead. (B)Dense orHard soil etc completed as directed by the engineer incharge |
| 4 | Providing and layingcement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- Graded brick bat aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (more than 10 ton) etc completed as directed by the engineer incharge |
| 5 | Providing and laying controlled cement concrete M.200 andcuring complete includingthe cost of formwork but excluding reinforcement for reinforced concrete work in (A) Foundations,footings, Baseof columnsandMassconcrete. (upto 10 ton) etc completed as directed by the engineer incharge |
| 6 | Filling available excavatedearth (excluding rock) in trenches.plinth, sides of foundations etc. in layers not exceeding 20 cm. in depthconsolidating each dispositedlayer by ramming and watering etc completed as directed by the engineer incharge |
| 7 | Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc completed as directed by the engineer incharge. |
| 8 | Providing material & labour TMT Bar 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton) etc completed as directed by the engineer incharge |
| 9 | Providing material & labour for fusion bonded epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/astm-775M including testing of coating at plant and all taxes (A) 10mm to 16mm dia. Bars. complate. |
| 10 | Providing materail and labour for teakwood column having size of 150 x 150 mm including cross-bracing of 100 x 100 mm in longitudnal direction & height as per site condition in R.C.C. footing as per design details including all necessary fixtures & fitting stainless-steel plate, ss bolt & nut, washer, gasket, etc.including sanding, dent filling, staining and 2 coat of pu weather protection paint for exterior wood etc completed as directed by the engineer incharge |
| 11 | Providing materail and labour forteakwood rafter having size of 100 x 150 mm & length as per site condition on teakwood column as per design details including all necessary fixtures & fitting stainless-steel plate, ss bolt & nut, washer, gasket, etc. including sanding, dent filling, staining and 2 coat of pu weather protection paint for exterior wood. etc completed as directed by the engineer incharge. |
| 12 | Providing materail and labour teakwood battens having size of 75 x 100 mm & length as per site condition on teakwood rafter as per design details including all necessary fixtures & fitting stainless-steel plate, ss bolt & nut, washer, gasket, etc completed as directed by the engineer incharge |
| 13 | Providing materail and labour teakwood planks having thickness of 50 mm & length as per site condition on teakwood rafter & battens as per design details including all necessary fixtures & fitting stainless-steel plate, ss bolt & nut, washer, gasket, etc. making hole in planks & cover it after bolting with wood dust & wood adhesive to hide bolt cap on top. Etc. including sanding, dent filling, staining and 2 coat of pu weather protection paint for exterior wood. etc completed as directed by the engineer incharge. |
| 14 | Providing materail and labour teakwood railing having height of 1.20 meter & length as per site condition on teakwood rafter as per design details having 100 x 50 mm thick bottom rail, 100 x 50 mm top rail, 100 x 100 mm baluster, 75 x 50 mm bracing. including all necessary fixtures & fitting stainless-steel plate, ss bolt & nut, washer, gasket, etc.including sanding, dent filling, staining and 2 coat of pu weather protection paint for exterior wood. etc completed as directed by the engineer incharge. |
AI Tender Summary
Tender Timeline
Aug 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender