Sanitary Fittings, Soakage Pit, Electric Fittings And Balance Work Of Je Shift Quarter Or Shift Quarter For 3Mw Igo Mercellong At Mercellong
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kharu → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Sanitary Fittings, Soakage Pit, Electric Fittings And Balance Work Of Je Shift Quarter Or Shift Quarter For 3Mw Igo Mercellong At Mercellong
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, includidng dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of surplus excavated earth as directed within a lead of 50m : in all kinds of soils |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand :68 graded stone aggregate 20 mm nominal size) carriage including |
| 3 | Random rubble masonry with hard stone from quarry in foundation and plinth including levelling upto with cement concrete 1:6:12 at plinth level with cement mortar 1:6 ( 1:cement : 6 coarse sand) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 5 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column, slab and complete job |
| 7 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in position in cement mortar 1:3 , costof required centering centering, shuttering and curing complete 1:3:6 ( 1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia and length (hold fast lugs or with dash fastners shall be paid for separately). Second class kail wood |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for seperately all complete as per direction of engineer-in-charge. Second Kail Wood 35mm thick |
| 10 | Applying priming coat with easy mixed pink or grey primer approved brand and manufacture on woodwork (hard and soft wood) |
| 11 | Primingwith synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work |
| 12 | Cement Plaster in two coats : 15mm cement plaster on the rough side of single or half brick wall of mix:1:4 ( 1 cement : 4 fine sand ) internal plaster |
| 13 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface smooth and even complete |
| 14 | Cement Plaster in two coats : 15mm cement plaster on the rough side of single or half brick wall of mix:1:4 ( 1 cement : 4 fine sand ) external plaster |
| 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work over and including primingn coat of water thinnable cement primer internal |
| 16 | Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 l/10sqm) over and including base coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 17 | Cement concrete flooring 1:2:4 stone aggregate 20mm nominal size finishing with a floating coat of neat cement including slurry but excluding the cost of nosing of steps etc 50mm thick 20mm monimal size stone aggregate crushed |
| 18 | Wooden flooring tongued and grooved in flooring including fixing with iron screws complete: 8 mm thick |
| 19 | Providing reinforced by organic fibres and/or inorganic synthetic fibrescement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer with water absorption less than 0.08% and condormation to IS 15622 of approved make in all colours and shades laid on 20mm tick cement mortar 1:4 including groutng the joints with shite cement and matching pgiments etc ciomplete : size of tiles 500x500 |
| 21 | Providing and fixing 1st class quality cermaic glazed tiles conforming to IS 15622 of approved make in all colours, shades expect burgundy, bottle green black of any thickness as approved byn Engineer-In-charge in skirting, risers in steps and dado over 12mm thck bed of cement mortar 1:3 and jointng with grey cement slurry in all complete job |
| 22 | Providing and fixing one piece construction white vitreous chinasquatting plate with an integral longitudinal flushing pipe. white P.V.C automatic flushing cistern. with fittings. standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings.G.I clamps and in C.P brass coupling complete. including painting of fittings and cutting and making good the walls and floors etc. whereverrequired: |
| 23 | Providing and fixing wash basin with C.I. brackets. 15 mm dia CP Brasssingle hole basin mixer of approved quality and make. including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 24 | Providing and fixingstainless steel kitchen sink as per IS 13983 with CI brackets and stainless steel plug 40mm including and making good the walls wherever required Kitchen sink with drain board 610x460mm bowl depth 200mm |
| 25 | Providing and fixing polypropylene random copolymer (PPR) having thermal stability for hot and cold water supply capable to withstand temperature upto 80degree including all special fittings eg elbow, tees, reducer, couplers and connectors etc including testing of joints complete as per direction of engineer -in-charge : 20mm nominal dia |
| 26 | Providing and fixing CP brass bib cock 15mm nominal bore = 4 Nos |
| 27 | Providing and fixing CP brass angle valve for basin mixer and gyser point of approved make |
| 28 | Providing and fixing CP brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.97kg 15mm nominal bore |
| 29 | Providing and fixing gun metal gate valve of approved quality 25mm nominal bore |
| 30 | Providing and fixing PVC waste pipes for sink and wash basin including PVC waste fittingscomplete |
| 31 | Providing and fixing PTMT grating of approved quality circular type 100mm dia |
| 32 | Providing and fixing of gyser for bathroom including fittings and all accessories complete job |
| 33 | Providing and placing on terrace at all floor levels polythylene water storage tank with cover and surface looking arragement and making necessary holes for inlet outlet and overflow pipes like sintex, electroplast, star lotus etc 1000 ltr |
| 34 | Wiring for lighting point /fan point/exhaust fan point/call bell point with 1.5sqm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sqmm FRLS PVC insluated copper conductor single core cable etc as required |
| 35 | Wiring for light/power plug with 2X4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 36 | Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required a)2x2.5 sqmm + 1x2.5sqmm earth wire |
| 37 | Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required a)2x2.5 sqmm + 1x2.5sqmm earth wire b)2x6 sqmm + 1x6 sqmm earth wire |
| 38 | Supplying and fixing following modular type, switch/socket on the existing switch box cover including connections etc as required A) 3 pin 5/6 A socket outlet |
| 39 | B) 3pin 5/6 A socket outlet |
| 40 | C) 15/16 A socket |
| 41 | D) 6 pin 15/16 a socket outlet |
| 42 | E) telephone socket outlet |
| 43 | F) TV antenna socket outlet |
| 44 | G) Bell Push |
| 45 | Supply and fixing 3 pin, 5A ceiling rose on the existing junction box, wooden block including connection etc as required |
| 46 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.Module (125mmX75mm) |
| 47 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3pin 5/6 amps & 15/16 amps modular switch connection etc as required |
| 48 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V on surface/recess complete with tinned copper bus bar neurtal bus bar, earth bar, din bar interconnections powder painted including earthing etc as required :A) 4 ways (4+12)double door |
| 49 | B) 8 way (4+18)double door |
| 50 | Supplying and fixing 5A to 12 A rating 240/415 V, 1o KA, C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required A) Single pole 6/16 amp |
| 51 | B) Single pole and neutral 32 amp |
| 52 | Supply and fixing of following sizes of PVC conduit along accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required A) 25mm |
| 53 | B) 40mm |
AI Tender Summary
Tender Timeline
Aug 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender