Probable Estimate For Development Of Hat Sarberia Dr. Bidhan Chandra Roy Smriti Sikshaniketan ( H.S. ) ( Rest Of Work Of Multi-Performance Hall Cum Gymnasium ) At Hat Sarberia
Tender Value
86.04 Lakhs
Estimated cost
Bid Submission
31 Aug 2022
0 days left
EMD
1.72 Lakhs
Bank guarantee accepted
Document Fee
17210
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
daspur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Probable Estimate For Development Of Hat Sarberia Dr. Bidhan Chandra Roy Smriti Sikshaniketan ( H.S. ) ( Rest Of Work Of Multi-Performance Hall Cum Gymnasium ) At Hat Sarberia
BOQ
| Sl. No. | Item Description |
| 1 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety.a) GroundFloor: |
| 2 | b) FirstFloor: |
| 3 | c) Second Floor: |
| 4 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation and upto roof of ground floor/upto 4 m. Tor steel/Mild Steel, JSW / JSPL / SHYAM / SRMB / BMASL / ELECTROSTEEL / SSL. (a) For works in foundation and upto roof of ground floor |
| 5 | (b) For works in first floor |
| 6 | (c) For works in second floor |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge, in ground floor |
| 8 | (b) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge, in first floor |
| 9 | (c) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge, in second floor |
| 10 | Brick work with 1st class bricks in cement morter (6:1).(a) In Superstructure, Ground Floor |
| 11 | (b) In Superstructure, First Floor |
| 12 | (c) In Superstructure, Second Floor |
| 13 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4), In Ground Floor. |
| 14 | (b) In First Floor. |
| 15 | (c) In Second Floor. |
| 16 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary .[Excluding cost of chipping over concrete surface].(a) With 6:1 cement morter, 20mm thick plaster.Gr. Floor |
| 17 | (b) With 6:1 cement morter, 20mm thick plaster.1st floor |
| 18 | (c) With 6:1 cement morter, 20mm thick plaster.2nd floor |
| 19 | (d) With 1:4 cement mortar, 15mm thick plaster.Ground floor |
| 20 | (e) With 1:4 cement mortar, 15mm thick plaster. |
| 21 | (f) With 1:4 cement mortar, 15mm thick plaster. |
| 22 | (g) With 1:4 cement mortar, 10mm thick plaster. Ground Floor |
| 23 | (h) With 1:4 cement mortar, 10mm thick plaster. 1st floor |
| 24 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 25 | Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughly.Two Coats. Other than yellow, pink. |
| 26 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost ofconcrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local. |
| 27 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made).40mm thick shutters with 19mm thick panel of size 30 to 45 cm.,Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 28 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.35 mm thick shutters (single leaf) |
| 29 | Supplying, fitting & fixing 1st quality Ceramic tiles in wall and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.a) In groundfloor |
| 30 | b) in first floor |
| 31 | c) in second floor |
| 32 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr\"s hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture ofwhite cement and colouring pigment to match with colour oftiles/ epoxy grout materials ofapproved make as directed and removal ofwax coating oftop surface oftiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost ofmaterials, labour and all other incidental charges complete true to thmanufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength > 1200 Na) In Ground Floor: |
| 33 | b) In first floor |
| 34 | c) In Second floor |
| 35 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall), 3 mm thick (weighing 7.4 kg/Sq.m) |
| 36 | Supplying, fitting and fixing M.S. clamps for door and window frame made offlat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately), 40mm X 6mm, 250mm Length. |
| 37 | Iron butt hinges of approved quality fitted and fixed with steel screws with ISI mark 100mm. X 50mm. X 1.25mm. |
| 38 | Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting, 250mm long. |
| 39 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes ofapproved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. |
| 40 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet. |
| 41 | Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.a) Fixed type steel windows as per IS sizes with horizontal glazing bars. |
| 42 | b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only] |
| 43 | c) Two point nose aluminium handle including fitting and fixing. |
| 44 | d) Aluminium peg stay 300 mm long including fitting and fixing. |
| 45 | e) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. |
| 46 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering. |
| 47 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 48 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface, with super gloss (hi-gloss) Two coats (with any shade except white) |
| 49 | (b) On steel or other metal surface, with super gloss (hi-gloss) Two coats (with any shade except white) |
| 50 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats ofpainting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately),(a) For Exposed Work, 15 mm. Dia. |
| 51 | (b) For Exposed Work, 25 mm. Dia. |
| 52 | (c) For Exposed Work, 32 mm. Dia. |
| 53 | (d) For Exposed Work, 40 mm. Dia. |
| 54 | (e) For Exposed Work, 50 mm. Dia. |
| 55 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality ofapproved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).a) 15mm |
| 56 | b) 40mm |
| 57 | c) 50mm |
| 58 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992a) 110 mm dia Single socket 3 m length. |
| 59 | b) 75 mm dia Single socket 3 m length. |
| 60 | c) Bend 87.5º, 110 mm |
| 61 | d) Bend 87.5º, 75 mm |
| 62 | e) Plain Tee, 110 mm. |
| 63 | f) Plain Tee, 75 mm. |
| 64 | g) Coupler, 110 mm |
| 65 | h) Coupler, 75 mm |
| 66 | i) Pipe Clip, 110 mm |
| 67 | j) Pipe Clip, 75 mm |
| 68 | k) 125/110 P Trap with W.C. Ring, 75 mm |
| 69 | l) Rubber Lubricant |
| 70 | m) Solvent Cement |
| 71 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size. |
| 72 | Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).a) 600 mm X 100 mm, White vitreous chinaware |
| 73 | b) Channel with outlet, stop end |
| 74 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware ofapproved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 470 mm X 280 mm X 340 mm |
| 75 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately)., 450 mm X 350 mm |
| 76 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With \"P\" trap |
| 77 | Supplying, fitting and fixing Closet seat ofapproved make with lid and C.P. hinges, rubber buffer and brass screws complete. Bestolite (solid type) white |
| 78 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 79 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets, Sink with drain board 1050 mm X 450 mm X 180 mm. |
| 80 | Supplying, fitting and fixing bib cock or stop cock.a) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 81 | b) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 82 | Supplying, fitting and fixing towel rail with two brackets. Aluminium, 25 mm dia. and 600 mm long. |
| 83 | Supplying, fitting and fixing soap holder. Polythene. |
| 84 | Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect. |
| 85 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand. C.P. urinal flush pipe fittings range of three |
| 86 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.600 mm X 450 mm |
| 87 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.Polythene Flush Pipe |
| 88 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia., 450 mm long |
| 89 | Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.a) 1050 mm long. |
| 90 | b) 900 mm long. |
| 91 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer, 2000litre capacity. |
| 92 | Supplying, fitting and fixing Waste fittings complete. |
| 93 | Supplying, fitting and fixing pillar cock of approved make., CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand). |
| 94 | Supplying fitting & fixing Sign Board with necessary letter writing. |
| 95 | Add GST @ 12% |
| 96 | Add Labour Welfare CESS @ 1% |
AI Tender Summary
Tender Timeline
Aug 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender