Bids Are Invited For Item1 Scissors Iron Handle - Small - Specification- The Scissors Shall Be Made Of Suitable Steel .Properly Heat Treated With Satisfactory Cutting Edges. The Finger Holes Shall Comfortable. The Scissors Shall Be Brightly Plated And P

Sharing tender

Bids Are Invited For Item1 Scissors Iron Handle - Small - Specification- The Scissors Shall Be Made Of Suitable Steel .Properly Heat Treated With Satisfactory Cutting Edges. The Finger Holes Shall Comfortable. The Scissors Shall Be Brightly Plated And Plating Shall Not Readily Peel Off. The Surface Shall Be Free From Forge Marks. The Scissors Should Be Quality Marked And Should Be Able To Cut Silk Pieces.If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Cost. Each Pair Of Scissor Should Be Wrapped In A Thin Wax Paper And Supplied In Grease Proof .The Scissors Shall Be Properly Greased At The Time Of Supply To Avoid Rusting. Item2 Stapler Machine No -10 – Kangaroo Specification - Stapler Machine Of 10 Nos Having Capacity To Hold Staples Of 10 Nos Only. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item3 Stapler Machine No 24-6– Kangaroo Specification - Stapler Machine Of 24-6 Nos. Having Capacity To Hold Staples Of 24-6 Nos. Only. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item4 Stapler Machine Hp 45 - Kangaroo Specification - Stapler Machine Hp45 Having Capacity To Hold Staples Of 24-6 Nos. Only. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item5 Stapler Wire 10 Nos - Kores Specification – Staples 1000 In A Box Shall Be Uniform Pieces Of 50 Size 10 No. Machine. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item6 Stapler Wire 24-6 No. -Kores Specification – Staples 1000 In A Box Shall Be Uniform Pieces Of 50 Size 24-6 No. Machine. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item7 Dak Pad Cloth Superior - Colour Red Specification Of Material -The Base Should Be Length 39.5Cms±1 Cm And Width 26.5±1 Cm.It Should Have Four Flaps To Cover The Dak. The Cloth Should Be Of Good Quality And Water Proof In Nature.If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item8 Thread Cotton Ball White 125 Gram Per Ball Specification –The Thread Should Be Continuous Of White Cotton 3 Ply Should Be Wound In Balls Of 125 Gm Each. The Tensile Strength Must Not Be Less Than 15Lb. On 7’ Sample. Should Be Free From Knots And Other Blemishes. Weight Of One Metre Thread Should Not Be More Than 1.5 Gm. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. 1 Dozen Balls Should Be Wrapped In Strong Kraft Paper Packets. Item9 Thread Cotton Ball Red / Yellow 125 Gm Per Ball Specification –The Thread Should Be Continuous Of Dark Brown And Yellow Cotton 2 Ply ( 4 Brown+4 Yellow Strands ) Should Be Wound In Balls Of 125 Gm Each. The Colour Should Be Fast To Water. The Tensile Strength Must Not Be Less Than 15Lb. On 7’ Sample. Should Be Free From Knots And Other Blemishes. Weight Of One Metre Thread Should Not Be More Than 1.5 Gm. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. 1 Dozen Balls Should Be Wrapped In Strong Kraft Paper Packets. Item10 Two Pen Set Pen Stand Plastic Specification Of Material – Having Length 26.6 Cm±5Mm Width 20Cm±5Mm. Two Pen Holders Along With Two Golden Ball Point Pen With Jotter Refills, Arrangement To Hold Paper Rolls For Notes Space To Hold Paper Strips, Visiting Card, Pins And Sponge Etc. Auto Writer Pen Stand Should Be Made Of Good Acrylic Transparent Plastic. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item11 Short Hand Pencil - Kohinoor Indigenous Make Length 177±3 Mm Diameter 7.5 Mm Specification Of Material – The Slips Shall Be Of Uniform Composition And Free From Grittiness Shall Write Smoothly And Be Sufficiently Strong To Withstand Sharpening With Knives Or Machines. The Slip In Each Pencil Shall Be Continuous Throughout And The Grading Shall Conform To The Recognized Commercial Standards. The Wood Used Shall Be Seasoned, Preferably Cedar, Straight Grained Should Be Free From Knots And Pores And Not Liable To Warp, Machines Or Knives Shall Easily Cut It Without Putting The Slip Inside To Undue Strain. The Axis Of The Slip Shall Coincide With That Of The Wood. The Gluing Of The Wood Each Other And To The Slip Shall Be Faultless And Shall Not Be Affected By Dampness Of Weather. The Finish And General Appearance Of Each Pencil Shall Be Uniformly Satisfactory, The Word Shorthand Should Be Imprinted On Each Stenographers Pencil. The Useful Qualities Should Not Deteriorate For 18 Months From The Date Of Supply And It So Happens The Suppliers Will Have To Make Free Replacement. Item12 Pencil Hb Natraj Specification – Superior Quality Hexagonal, With Attractive Lacquering And Finish, With Stripes And Designs Multi-Colored ( Not Less Than Three Colours ) Brand Name Etc. Printed In Golden Letters. Length 177±3Mm. Diameter 7.5 To 8 Mm. The Slips Shall Be Of Uniform Composition And Free From Grittiness Shall Write Smoothly And Be Sufficiently Strong To Withstand Sharpening With Knives Or Machines. The Slip In Each Pencil Shall Be Continuous Throughout And The Grading Shall Conform To The Recognized Commercial Standards. The Wood Used Shall Be Seasoned, Preferably Cedar, Straight Grained Should Be Free From Knots And Pores And Not Liable To Warp, Machines Or Knives Shall Easily Cut It Without Putting The Slip Inside To Undue Strain. The Axis Of The Slip Shall Coincide With That Of The Wood. The Gluing Of The Wood Each Other And To The Slip Shall Be Faultless And Shall Not Be Affected By Dampness Of Weather. The Finish And General Appearance Of Each Pencil Shall Be Uniformly Satisfactory, The Word “Hb Natraj Should Be Imprinted On Each ‘Pencil’. The Useful Qualities Should Not Deteriorate For Three Years From The Date Of Supply And It So Happens The Suppliers Will Have To Make Free Replacement. Item13 Pencil Apsara Specification – Superior Quality Hexagonal, With Attractive Lacquering And Finish, With Stripes And Designs Multi-Colored ( Not Less Than Three Colours ) Brand Name Etc. Printed In Golden Letters. Length 177±3Mm. Diameter 7.5 To 8 Mm. The Slips Shall Be Of Uniform Composition And Free From Grittiness Shall Write Smoothly And Be Sufficiently Strong To Withstand Sharpening With Knives Or Machines. The Slip In Each Pencil Shall Be Continuous Throughout And The Grading Shall Conform To The Recognized Commercial Standards. The Wood Used Shall Be Seasoned, Preferably Cedar, Straight Grained Should Be Free From Knots And Pores And Not Liable To Warp, Machines Or Knives Shall Easily Cut It Without Putting The Slip Inside To Undue Strain. The Axis Of The Slip Shall Coincide With That Of The Wood. The Gluing Of The Wood Each Other And To The Slip Shall Be Faultless And Shall Not Be Affected By Dampness Of Weather. The Finish And General Appearance Of Each Pencil Shall Be Uniformly Satisfactory. The Useful Qualities Should Not Deteriorate For 18 Months From The Date Of Supply And It So Happens The Suppliers Will Have To Make Free Replacement. Note - The Pencil Shall Not Be Effected By Moth, The Gluing Of Slates Should Remain Perfect For At Least 18 Months From The Date Of Supply Otherwise The Firm Will Have To Replace Them Free Of Cost. If Any Defect Arises Then The Supplier Will Have To Make Replacement Free Of Cost At Its Own Risk. Item14 Rubber Pencil Natraj 6±1 Gram Each Specification – Shall Be Free From Coarse And Gritty Substances, Shall Completely Erase Writing With Ink, Pencil Or Typewritten Matter As The Case May Be With Out Fouling The Paper And Shall Preserve Its Usefull Properties For At Least 18 Months From The Date Of Supply, If The Erasers Loose Their Useful Properties Or Deform Within 18 Months Then The Suppliers Will Have To Make Free Replacement. Item15 Rubber Pencil Apsara Non Dust 9±1 Gram Each Specification – Shall Be Free From Coarse & Gritty Substances, Shall Completely Erase Writing With Ink, Pencil Or Typewritten Matter As The Case May Be With Out Fouling The Paper And Shall Preserve Its Usefull Properties For At Least 18 Months From The Date Of Supply, If The Erasers Loose Their Useful Properties Or Deform Within 18 Months Then The Suppliers Will Have To Make Free Replacement. Item16 Cutter Plastic Natraj Specification Of Material - The Pencil Sharpeners Shall Be Made Of Good Plastic. Sharp Brightly Plated Blades Mounted On Cones. The Tip End Of Sharpening Cones Shall Be Kept Open To Allow The Slip To Protrude Out While Sharpening Them To A Fine Point. The Sharpeners Shall Sharpen The Pencils To A Fine Point And In The Process The Slips Should Not Break. The Sharpeners Shall Give Satisfactory Service For At Least 18 Months From The Date Of Supply. If Any Defect Arises Then Firm Will Have To Make Replacement At Its Own Risk And Cost. Item17 Bodkin Specification Of Material - A - Bodkin Steel With Split Type Eye Suitable For Working With Sutli And Thread Cotton Red Or Yellow With Polished Wooden Handle Or Plastic Handle Length Of Protruded Steel 8.5±0.5 Cms. Length Of Handle 8.5±0.5 Cms. A - The Metal Portion Should Be Brightly Plated Steel With Split Type Eye Suitabale For Working With Sutli. The Length And The Gauge Of Proturbed Steel Portion Should Be 8.5±0.5 Cms And 8 S.W.G Respectively. It Shall Be Provided With Polished Wooden Handle Or Plastic Handle Of 8.5±0.5 Cms. Length Properly Fitted With Steel Portion Handling A Comfortable Grip. The Steel Portion Shall Remain Rust Free For Atleast 18 Months From The Date Of Supply. Twelve Number Of Bodkins Shall Be Properly Packed In A Strong Cardboard. Item18 Paper Weight Coloured Specification – It Shall Be Made Of Coloured Glass. The Weight Shall Not Be Less Than 180 ±10 Grams. The Shape Shall Be Globular / Uniform Square. If Any Defect Arises Then The Firm Will Replace The Goods At Its Own Risk And Cost. Item19 Scale Steel 12 Inch - Camlin Specification Of Material- It Should With Division In Inches And Centimeters Width 25 Mm And Thickness 1 Mm ± 2 Percent. The Scale Should Be Made Of Good Quality Steel. Item20 Cloth Lined Envelop 16”X12” Specification Of Material 1- Size Of Envelop- 16”×12 ” 2- Flap - 3” 3- Ends / Picks - 18 / 20 Per Square Inch 4- Grammage - Kraft- 120 5- Bursting Strength- 20 Pound / Inch² Item21 Cloth Lined Envelop 12”×10 ” Specification Of Material 1. Size Of Envelop- 12”×10 ” 2. Flap - 2.5” 3. Ends / Picks - 18 / 20 Per Square Inch 4. Grammage - Kraft- 120 5. Bursting Strength- 20 Pound / Inch² Item22 Desk Calender Stand Plastic Or Steel Specification- The Desk Calendar Made Of Plastic Having Length 23 Cms±2Cm. And Width 20Cms. ±1Cm. It Should Have Space To Hold Desk Calendar Refill And Pins. Item23 Suja 15 Cms Specification Of Material- Length Of Suja 15 Cm Long With Narrow Hole At Back.It Is Specially Stitching By Country Jute Twine Sutli. Item24 Desk Knife Specification Of Material - 1 Total Length Of Desk Knife Should Be 25Cm±2Mm ( Length Of Blade Should Be 15 Cm And Length Of Plastic Handle Is 10 Cm ) Width Of Blade Is 2Cm±2Mm And Thickness Of Blade Should Be 1.5Mm±.2Mm. Plastic Handle Should Be Of Polypropylene Material In Sheet.Blade Of Knife Made Of Good Quality Stainless Steel With Sharp Edge, Multipurpose In Use. Item25 Matches Box Home Lite Large Specification –Match Box Having 300 Nos. Of Sticks. Sticks Tip Should Be Carbonized In Nature. Item26 Candle Wax Pack Of 6 Specification– Six Sticks In A Packet , Each Stick Should Weight 38 / 45 Garm. The Candle Shall Be White Of Minimum Length 20 Cms, Shall Burn For Atleast 4 Hours Under Normal Atomospheric Condition Without Sooty Flame And Be Free From Moisture. The Candle Smust Not Melt , Deform Or Stick With Each Other Under Normal Storing Condition For Atleast 18 Months From The Date Of Supply, If Otherwise The Supply Should Be Replaced Free Of Cost. Item27 Tag Cotton - White Specification Of Material – The Tag Should Be Bleached White And 18.0 Cms. Long, 2.5 Cms. Brightly Plated Metal Pierces Which Shall Be Securely Fastened To Both Ends. The Tensile Strength Must Not Be Less Than 11 Lbs. If Any Defects Arises Then The Firm Will Have To Make Replacement Free Of Cost. Packing And Marking – The Supply Should Be In Packets Of 100 Tags In Each. 10 Such Packets Should Be Bundled In A Strong Kraft Paper.