|
| 1 | State Plan 2021-2022:- Supply, erection, testing and commissioning of Mechanical flow meter in Raw/clear water transmission and GLSR/OHSR Tanks under PH Section Nenmara |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 6 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 7 | Supply and installation of Mechanical flow meters |
| 8 | Supplying a Mechanical flow meter of Woltman type confirming to ISO 4064 Class B of ARAD/ZENNER/REYCHEM RPG/ITRON make and the flow meter shall be tested and certified by FCRI Palakkad. (KWA/HO/SP-4014/2012/flow meter & soft starter;-Proceedings of MD KWAdt 27/06/2012)- Mechanical flow meter of350mm dia |
| 9 | Supplying a Mechanical flow meter of Woltman type confirming to ISO 4064 Class B of ARAD/ZENNER/REYCHEM RPG/ITRON make and the flow meter shall be tested and certified by FCRI Palakkad. (KWA/HO/SP-4014/2012/flow meter & soft starter;-Proceedings of MD KWAdt 27/06/2012)- Mechanical flow meter of300mm dia |
| 10 | Supplying a Mechanical flow meter of Woltman type confirming to ISO 4064 Class B of ARAD/ZENNER/REYCHEM RPG/ITRON make and the flow meter shall be tested and certified by FCRI Palakkad. (KWA/HO/SP-4014/2012/flow meter & soft starter;-Proceedings of MD KWAdt 27/06/2012)- Mechanical flow meter of200mm dia |
| 11 | Supplying a Mechanical flow meter of Woltman type confirming to ISO 4064 Class B of ARAD/ZENNER/REYCHEM RPG/ITRON make and the flow meter shall be tested and certified by FCRI Palakkad. (KWA/HO/SP-4014/2012/flow meter & soft starter;-Proceedings of MD KWAdt 27/06/2012)- Mechanical flow meter of 150mm dia |
| 12 | Engaging Coolie |
| 13 | Engaging Fitter ( grade 1) |
| 14 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 150mm Dia. |
| 15 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 200mm Dia. |
| 16 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia. |
| 17 | Supply of DI K9 Pipe Conforming to IS 8329/2000, 350mm Dia. |
