Purchase Of Furniture For Faculty House At Cdlu, Sirsa. Purchase Of Furniture For Faculty House At Cdlu, Sirsa. , Providing And Fixing Of Reception Table Of Size - 1800 X 680 X 1140(H) Mm Fabricated Out Of 18Mm/25Mm Thick Commercial Ply With Top Made Of 1, sirsa-Haryana

Purchase Of Furniture For Faculty House At Cdlu, Sirsa. Purchase Of Furniture For Faculty House At Cdlu, Sirsa. , Providing And Fixing Of Reception Table Of Size - 1800 X 680 X 1140(H) Mm Fabricated Out Of 18Mm/25Mm Thick Commercial Ply With Top Made Of 19Mm Thick Prepolished Granite ( Cherry Red ) Over 19Mm Thick Commercial Ply With Power And Data Outlet Points And All Internal Surfaces And Back To Be Finished With 4Mm Thick Teak Veneer. Table Should Be Finished With Adequate Provision For Storage By Way Of Drawers And Shuttered Storage With Multipurpose Locks/Handles/Drawer Channel, Etc. With Accessories, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 01, Item No. 1. (In Waiting Reception) , Providing And Placing Storage St Of Size - 1800 X 530 X 750 Mm (H) Fabricated Out Of 18Mm/ 12Mm/ 6Mm Thick Commercial Ply, Teak Wood Skirting, Shelves Made Of 18Mm Thick Commercial Ply Complete In All Respect As Per Drawing, Storage Shall Comprise Of 2 Rows Of Filing Drawers, Drawers Shall Be Fitted With Drawer Slides, Handles, Locks Etc., Ball Catchers, External Exposed Surfaces Shall Be Finished With 1.5Mm Thick Laminate And All Internal Surfaces And Back With 1.0Mm Thick Laminate. Shutters To Be Fabricated Out Of 18Mm Thick Commercial Ply Finished With 1.5Mm Thick Laminate, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 01, Item No. 2. (In Waiting Reception) , Providing And Placing Fully Upholstered Three- Seater Sofa Of Size - 2350 X 790 X 750 Mm(H) With 4 Rubber Foam Of Jindal, Sleepwell, Mm Foam In Seat And 3 Rubber Foam In Back, Fabricated Out Of Teak Wood Wooden Members. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 01, Item No. 3. (In Waiting Reception) , Providing And Placing Static Single Seater Sofa. The Dimensions Of Seat Should Be610(W) X 620 Mm(D) And Of Back Shall Be 610Mm(W) X 850 Mm(H). The Seat Shall Be Made Up Teak Wood And Woven Cane With Additonal Portable Cushioned Back And Seat Upholstered With Fabric Of Approved Make. The Moulded Polyurethane Foam Used In The Seat And Back Shall Be Of Density [45-55]+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Legs Shall Be Made Up Of Teak Wood Wood. The Chair Shall Be Fabricated Correct To Shape, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect Sand To Be Manufactured Strictly As Per Drawing No. 01, Item No. 4. (In Waiting Reception) , Providing And Placing Teak Wood Corner Table Of Size - 750 X 750 X 450 Mm(H). Table Top Shall Have 4Mm Thick Decorative Teak Veneer Over 25Mm (19 +6Mm) Thick Commercial Ply With Teak Wood Edge Lipping With Teak Wood Wooden Legs 50 X 50 Mm At Top And 25 X 25 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 01, 02,03,04 & 05 Item No. 5, 6, 8, 6 & 3 Respectively. (In Waiting Reception, Meeting Room, Drawing & Dining Cm Suit) , Providing And Fixing Teak Wood Center Table Of Size - 1200 X 1200 X 450 Mm(H). Table Top Shall Have 4Mm Thick Decorative Teak Veneer Over 25Mm (19 +6Mm) Thick Commercial Ply With Teak Wood Wooden Legs 50 X 50 Mm At Top And 25 X 25 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 01, Item No. 6. (In Waiting Reception, Meeting Room, Drawing & Dining Cm Suit) , Providing And Placing Receptionist Chair [Godrej (Versa Neo Mid Back) Or Similar Model Of Durian/Nilkamal/Wipro/Veils Make]. The Overall Dimensions Of The Chair Shall Be 76.1Cm X 76.1Cm X (98.6-116.1Cm). The Seat Height Shall Be 44.5Cm54.5Cm. The Cushioned Seat And Back Is Made Of Injection Moulded Plastic Outer And Inner. Plaster Inner Is Upholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45Kg Per Meter Cube. The Stitched Cover Is Made From Spacer Fabric And Leatherette. Seat Size Shall Be 47Cm X 48Cm. The Back Size Shall Be 45Cm X 60.5Cm. The Armrests Top Is Moulded From Pu And Mounted On To A Drop Lift Adjustment Type Tubular Armrest Support Made Of 3.8Cm Diameter X 0.2Cm Thick Ms Erw Tube. The Chair Shall Be Bifma Level Certified From Bifma Authorized Certifier. The Armrest Height Is Adjustable Upto 6.5Cm In 5 Steps. The Chair Shall Be Green Guard Certified From Ul Environment. The Armrest Structure Is Powder Coated Minimum 50 Microns. It Shall Have Active Bio Synchro Mechanism With Features Like 360 Degree Revolving, Front Pivot Tilt Mechanism, Tilt Tension Adjustment, 5-Position Tilt Limiter, Etc.. The Chair Shall Be Griha Certified. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is 6Cm. It Shall Also Have Adjustable Back Support. Back Frame Is Connected To Up/Down Mechanism Housed In Plastic T Spine. It Can Be Adjusted Fro 7.2Cm For Comfortable Back Support To Suit Individual Need. The Pneumatic Height Adjustment Has An Stroke Of 10Cm. The Pedestal Is Injection Moulded In Black 33 % Glass Filled Nylon 66 And Fitted With 5 Nos. Of Twin Wheel Castors. The Pedestal Is 66Cm Pitch Center Dia Complete In All Respects. (In Waiting Reception) , Providing And Placing Fully Upholstered Three- Seater Sofa Of Size - 2350 X 790 X 750 Mm(H) With 4 Rubber Foam Of Jindal, Sleepwell, Mm Foam In Seat And 3 Rubber Foam In Back, Fabricated Out Of Teak Wood Wooden Members. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 02, Item No. 1. (In Meeting Room) , Providing And Fixing Teak Wood Center Table Of Size - 680 X 1200 X 450 Mm (H). Table Top Shall Have 4Mm Thick Decorative Teak Veneer Over 25Mm (19 + 6Mm) Thick Commercial Ply With Teak Wood Wooden Legs 50 X 50 Mm At Top And 25 X 25 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 02, Item No. 3. (In Meeting Room, Cm Suit) , Providing And Placing Teak Wood High Table Of Size - 1350 X 570 X 830Mm(H). Table Top Shall Have 4Mm Thick Decorative Teak Veneer Over 25Mm (19 +6Mm) Thick Commercial Ply With Teak Wood Edge Lipping Supported Over 25 X 75Mm Block Board Members. Teak Wood Wooden Legs Reducing Legs 62.5 X 62.5 Mm At Top, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 02, Item No. 4. (Inmeeting Room) , Providing And Placing Display Unit Of Size - 1800 X 530 X 830 Mm(H). Table Top To Be Fabricated With Pre Polished 19Mm Thick Granite Top Of Approved Shade With Edges Moulded, Over 19Mm Thick Commercial Ply, Sliding Cabinets Made Of 18Mm Thick Commercial Ply Storage Shall Comprise Of 2 Rows Of Filing Drawers, Internal Surfaces Of Drawers Shall Be Finished With 0.8Mm Thick Laminate, Drawers Shall Be Fitted With Drawer Slides, Locks Etc., Ball Catchers. Back To Be Finished With 0.8Mm Thick Laminate Over 6Mm Thick Commercial Ply. Shutters To Be Fabricated Out Of 19Mm Thick Commercial Ply Finished With 4Mm Thick Teak Veneer. Teak Wood Wooden Legs 62.5 X 62.5 Mm At Top And 40 X 40 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 02, Item No. 5. (In Meeting Room) , Providing And Placing Teak Wood Bed Of Size 1800 X 2100 Mm Made Of 18Mm Plywood Over 38 X 75Mm Hardwood Members. Exterior Surfaces To Be Finished In 4Mm Thick Decorative Teak Veneer Over (12Mm + 19Mm) Thick Commercial Ply With 35 X 4Mm Thick Edge Lipping With Head Board Finished With Quilting In Leatherite Over 50Mm Thick Foam Over 12Mm Thick Commercial Ply And Edging In 50 X 25Mm Thick Teak Wood Wooden Band Made To Shape. Teak Wood Wooden Legs Of Size 100 X 100 Mm With Reducing Ends, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No. 1. (In Bed Room Cm Suit) , Providing And Fixing Teak Wood Bed Side Table Of Size 600 X 450 X 530Mm(H) To Be Finished In 4Mm Thick Decorative Teak Veneer Over 19Mm Thick Commercial Ply Consisting Of Two Drawers Finished With 0.8Mm Thick Laminate On Interior Surfaces With Drawer Channel Etc. Teak Wood Wooden Legs Of Size 75 X 75 Mm With Reducing Ends, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No. 1. (In Bed Room Cm Suit) , Providing And Placing Fully Upholstered Three- Seater Sofa Of Size - 2000 X 900 X 800Mm(H) With 4 Rubber Foam Of Jindal, Sleepwell, Mm Foam In Seat And 3 Rubber Foam In Back, Fabricated Out Of Teak Wood Wooden Members. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03 & 05, Item No.2. (In Bed Room Cm Suit & Vip Dining) , Providing And Placing Fully Upholstered Single Seater Sofa With 2 Rubber Foam Of Jindal, Sleepwell, Mm Foam Make In Seat And Back. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No. 3. (In Bed Room Cm Suit) , Providing And Placing Fully Upholstered Easy Chair With 2 Rubber Foam Of Jindal, Sleepwell, Mm Foam Make In Seat And Back. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No.4. (In Bed Room Cm Suit) , Providing And Placing Static Study Chair. The Dimensions Of Seat Should Be- 475Mm(W) X 475 Mm(D) And Of Back Shall Be 480Mm(W) X 755 Mm(H). The Seat Shall Be Made Up Teak Wood And Woven Cane With Cushioned Back Upholstered With Fabric Of Approved Make. The Moulded Polyurethane Foam Shall Be Of Density [45-55]+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Legs Shall Be Made Up Of Teak Wood. The Chair Shall Be Fabricated Correct To Shape And Geometry, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03 & 06, Item No. 5 & 2 Respectively. (In Bed Room Cm Suit & Guest Room) , Providing And Fixing Coat Stand Made Of Teak Wood As Per Image And Drawing To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No.6. (In Bed Room Cm Suit) , Providing And Placing Cupboard Of Size - 1300 X 600 X 2100 (H) With Vertical Members Fabricated Out Of 12Mm Commercial Ply Over 25Mm Commercial Board Finished With 0.8Mm Thick Laminate On Interior Surfaces And 4Mm Thick Teak Veneer On Exterior Surface, Shelves Made Of 18Mm Thick Commercial Ply Complete In All Respect As Per Drawing. The Shutters Shall Have 25Mm Wide Teak Wood Wooden Louvers At 25Mm C/C Distance Fixed On Teak Wood Wooden Frame (75 X 25Mm), Shall Be Fitted With Self Closing Hinges, Ball Catchers, Handles, Locks Of Approved Make, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No.9. (In Bed Room Cm Suit) , Providing And Fixing Of Dressing Table Of Size 1050 X 600 X 750 Mm Fabricated Out Of 4Mm Thick Teak Veneer Over (6Mm + 19 Mm) Thick Commercial Ply Table Top With 29 X 4Mm Thick Teak Wood Edge Lipping Made To Shape As Per Drawing With Keyboard Drawer Made Of 1Mm Thick Laminate Over 8Mm Thick Commercial Ply And Teak Wood Edging Made To Shape. The Drawers Shall Be Fitted With Drawer Slides, Handles, Locks Etc., Shutters Shall Be Fitted With Self Closing Hinges, Ball Catchers, Handles Locks Of Approved Make. Teak Wood Wooden Legs Of Size 62.5 X 62.5 Mm At Top And 38 X 38 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No.9. (In Bed Room Cm Suit) , Providing And Fixing Teak Wood Luggage Rack Of Size 1050 X 600 Mm X 450Mm With Vertical Members Fabricated Out Of With 12Mm Commercial Ply Over 19Mm Commercial Ply Finished With 4Mm Thick Teak Veneer With 25 X 6Mm Ss Oval Strips Fixed At 75Mm C/C Distance As Shown In Drawing. Vertical Member Over Wall To Be Finished In 4Mm Teak Veneer Over 8Mm Thick Commercial Ply, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect Sand To Be Manufactured Strictly As Per Drawing No. 03, Item No.9. (In Bed Room Cm Suit) , Providing And Fixing 1800 X 1100 Mm Lcd Unit (Excluding Lcd) Fabricated Out Of 4Mm Thick Decorative Teak Veneer Over 19Mm Thick Commercial Ply Finished In Pu Polish. Additional Unit Consisting Of Drawer Of Size 1200 X 225 X 300Mm Depth Fabricated Out Of 4Mm Thick Decorative White Oak Veneer Over 12Mm Thick Commercial Ply With 12Mm Thick Toughened Glass On Top Of 1800Mm Length And 300Mm Width, And All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 03 & 05, Item No. 10 & 6 Respectively. (In Bed Room Cm Suit & Vip Dining) , Providing And Fixing Of Study Table Of Size 1600 X 600 X 750 Mm Fabricated Out Of 4Mm Thick Teak Veneer Over (6Mm + 19 Mm) Thick Commercial Ply Table Top With 29 X 4Mm Thick Teak Wood Edge Lipping Made To Shape As Per Drawing With Keyboard Drawer Made Of 1Mm Thick Laminate Over 8Mm Thick Commercial Ply And Teak Wood Edging Made To Shape. The Drawers Shall Be Fitted With Drawer Slides, Handles, Locks Etc., Shutters Shall Be Fitted With Self Closing Hinges, Ball Catchers, Handles Locks Of Approved Make. Teak Wood Wooden Legs Of Size 62.5 X 62.5 Mm At Top And 38 X 38 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 03, Item No. 11. (In Bed Room Cm Suit) , Providing And Fixing Tea/Coffee Unit Of Size 1000 X 600 X 830Mm(H) With Vertical Members Fabricated Out Of 12Mm Commercial Ply Over 19Mm Commercial Ply Finished With 4Mm Thick Teak Veneer. Vertical Member Over Wall To Be Finished In 4Mm Teak Veneer Over 8Mm Thick Commercial Ply. Table Top With Pre Polished 19Mm Thick Granite (Cherry Red) With Edges Moulded, Over 19Mm Thick Commercial Ply, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect Sand To Be Manufactured Strictly As Per Drawing No. 03& 06, Item No. 11 & 5 Respectively. (In Bed Room Cm Suit & Guest Room) , Providing And Placing Fully Upholstered Three- Seater Sofa Of Size - 2350 X 790 X 750 Mm(H) With 4 Rubber Foam Of Jindal, Sleepwell, Mm Foam In Seat And 3 Rubber Foam In Back, Fabricated Out Of Teak Wood Wooden Members. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 04, Item No. 1. (In Drawing/Dining Cm Suit) , Providing And Placing Static Single Seater Sofa. The Dimensions Of Seat Should Be610(W) X 620 Mm(D) And Of Back Shall Be 610Mm(W) X 850 Mm(H). The Seat Shall Be Made Up Teak Wood And Woven Cane With Additional Portable Cushioned Back And Seat Upholstered With Fabric Of Approved Make. The Moulded Polyurethane Foam Used In The Seat And Back Shall Be Of Density [45-55]+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Legs Shall Be Made Up Of Teak Wood. The Chair Shall Be Fabricated Correct To Shape, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 04, Item No. 2. (In Drawing/Dining Cm Suit) , Providing And Placing Static Teak Wood Dining Chairs. The Dimensions Of Seat Should Be - 554 Mm(W) X 560 Mm(D) And Of Back Shall Be 471 Mm(W) X 1020 Mm(H). The Seat Shall Be Made Up Teak Wood And Upholstered With Fabric And Moulded Polyurethane Foam. The Moulded Polyurethane Foam Shall Be Of Density [45-55]+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Back And Legs Shall Be Made Up Of Teak Wood, All Exposed Wood/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 04, Item No. 3. (In Drawing/Dining Cm Suit) , Providing And Placing Teak Wood Dining Table Of Size Table 2100 X 1200 X 750Mm(H) . Table Top Shall Have 1.5Mm Thick Laminate Over 25Mm Thick Commercial Ply, Adequate Hard Wood Framing Members To Support The Top With Teak Wood Edge Lipping Made To Shape, Legs To Be Made Out Of Teak Wood Wooden Members Of Size 75 X 75 Mm On Top And 50 X 50 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 04, Item No. 4. (In Drawing/Dining Cm Suit) , Providing And Placing Display Unit Of Size - 1200 X 530 X 830 Mm(H). Table Top To Be Fabricated With Pre Polished 19Mm Thick Granite Top Of Approved Shade With Edges Moulded, Over 19Mm Thick Commercial Ply, Sliding Cabinets Made Of 18Mm Thick Commercial Ply Storage Shall Comprise Of 2 Rows Of Filing Drawers, Internal Surfaces Of Drawers Shall Be Finished With 0.8Mm Thick Laminate, Drawers Shall Be Fitted With Drawer Slides, Locks Etc., Ball Catchers. Back To Be Finished With 0.8Mm Thick Laminate Over 6Mm Thick Commercial Ply. Shutters To Be Fabricated Out Of 19Mm Thick Commercial Ply Finished With 4Mm Thick Teak Veneer. Teak Wood Wooden Legs 62.5 X 62.5 Mm At Top And 40 X 40 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respect And To Be Manufactured Strictly As Per Drawing No. 04, Item No. 5. (In Drawing/Dining Cm Suit & Vip Dining) , Providing And Placing Dining Table Of Size 6000 X 1350 X 750Mm(H) . Table Top Shall Have 1.5Mm Thick Laminate Over 19Mm Thick Commercial Ply, Adequate Vertical 16 Gauge Ss Pipe 75 X 75Mm Supported On Base Of Twin 16 Gauge Ss Pipes Of 50 X 50Mm Support The Top Framing Members Of 16 Guage Ss Pipe Of 50 X 50Mm, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 05, Item No. 1. (In Vip Dining) , Providing And Placing Static Teak Wood Dining Chair. The Dimensions Of Seat Should Be- 420Mm(W) X 450 Mm(D) And Of Back Shall Be 420Mm(W) X 880Mm(H). The Seat Shall Be Made Up Teak Wood And Upholstered With Fabric And Moulded Polyurethane Foam. The Moulded Polyurethane Foam Shall Be Of Density [45-55]+/-2Kg/M ³, And Hardness Load 16+/-2Kgf As Per Is:7888 For 25% Compression. The Back And Legs Shall Be Made Up Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 05, Item No. 4. (In Vip Dining) , Providing And Placing 900 X 2100 Mm Teak Wood Bed Made Of 18Mm Plywood Over 38 X 75Mm Hardwood Members. Exterior Surfaces To Be Finished In 4Mm Thick Decorative Teak Veneer Over 12Mm + 19Mm Thick Commercial Ply With 35 X 4Mm Thick Edge Lipping With Head Board Finished With 100Mm Wide X 12Mm Thick Teak Wood Wooden Panels To Be Fixed On 40 X 100Mm Wooden Legs With Flat Nylon Castors Made As Per Shape . Teak Wood Wooden Legs Of Size 75 X 75 Mm With Reducing Ends, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 1. (In Guest Room) , Providing And Fixing Teak Wood Bed Side Table 900 (W) X 450 (D) X 530Mm (H). To Be Finished In 4Mm Thick Decorative Teak Veneer Over 19Mm Thick Commercial Ply Consisting Of One Drawers Finished With 0.8Mm Thick Laminate On Interior Surfaces With Drawer Channel Etc. Teak Wood Wooden Legs Of Size 75 X 75 Mm With Reducing Ends, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 1. (In Guest Room) , Providing And Fixing Teak Wood Side Table Of Size 680 X 680 X 450 Mm(H). Table Top Shall Be Fabricated Out Of 4Mm Thick Teak Veneer Over 25Mm (6Mm + 19Mm) Commercial Ply With 29 X 4Mm Thick Edge Lipping Made To Shape. Teak Wood Wooden Legs Of Size 50 X 50 Mm At Top And 25 X 25 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 3. (In Guest Room) , Providing And Placing Fully Upholstered Single Seater Sofa With 2 Rubber Foam Of Jindal, Sleepwell, Mm Foam Make In Seat And Back. The Leatherite Used Shall Be In The Range Of Rs 500 - 600 Per Metre. Arms And Legs To Be Fabricated Out Of Teak Wood, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 4. (In Guest Room) , Providing And Fixing Of Study Table Of Size 2100 X 570 X 750 Mm(H) Fabricated Out Of 4Mm Teak Veneer Over 6Mm + 19 Mm Thick Commercial Ply Table Top With 29 X 4Mm Thick Teak Wood Edge Lipping Made To Shape As Per Drawing & To Be Finished In Pu Polish. The Drawer Shall Be Fitted With Drawer Slides, Handles, Locks Etc. Of Approved Make. The Top Shall Rest Upon 25 X 75 Mm Hard Wood Members Over Teak Wood Wooden Legs Of Size 62.5 X 62.5 Mm At Top And 38 X 38 Mm At Bottom, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 5. (In Guest Room) , Providing And Fixing 1700 X 600 Mm X 450Mm Teak Wood Luggage Rack With Vertical Members Fabricated Out Of With 12Mm Commercial Ply Over 19Mm Commercial Ply Finished With 4Mm Thick Teak Veneer With 25 X 6Mm Ss Oval Strips Fixed At 75Mm C/C Distance As Shown In Drawing. Vertical Member Over Wall To Be Finished In 4Mm Teak Veneer Over 8Mm Thick Commercial Ply, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 6. (In Guest Room) , Providing And Placing Cupboard Of Size - 600 X 1200 X 2100 (H) With Vertical Members Fabricated Out Of 12Mm Commercial Ply Over 25Mm Commercial Board Finished With 0.8Mm Thick Laminate On Interior Surfaces And Teak Veneer On Exterior Surface, Shelves Made Of 18Mm Thick Commercial Ply Complete In All Respect As Per Drawing. The Shutters Shall Have 25Mm Wide Teak Wood Wooden Louvers At 25Mm C/C Distance Fixed On Teak Wood Wooden Frame (75 X 25Mm), Shall Be Fitted With Self Closing Hinges, Ball Catchers, Handles, Locks Of Approved Make, All Exposed Wooden/Veneer Work To Be Finished In Pu Polish, Complete In All Respects And To Be Manufactured Strictly As Per Design And Drawing No. 06, Item No. 6. (In Guest Room)

INR 5000 /-

INR 67300.0 /-

Refer document

Name of Work: Purchase of Furniture for Faculty House at CDLU, Sirsa.

Sl. No.	Item Description
1	Providing and fixing of Reception Table of size - 1800 X 680 X 1140(H) mm fabricated out of 18mm/25mm thick commercial ply with top made of 19mm thick prepolished granite ( Cherry Red ) over 19mm thick commercial ply with power and data outlet points and all internal surfaces and back to be finished with 4mm thick Teak Veneer. Table should be finished with adequate provision for storage by way of drawers and shuttered storage with multipurpose locks/handles/drawer channel, etc. with accessories, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 01, item no. 1. (In Waiting Reception)
2	Providing and placing Storage ST of size - 1800 x 530 x 750 mm (H) fabricated out of 18mm/ 12mm/ 6mm thick commercial ply, Teak Wood skirting, shelves made of 18mm thick commercial ply complete in all respect as per drawing, storage shall comprise of 2 rows of filing drawers, drawers shall be fitted with drawer slides, handles, locks etc., ball catchers, external exposed surfaces shall be finished with 1.5mm thick laminate and all internal surfaces and back with 1.0mm thick laminate. Shutters to be fabricated out of 18mm thick commercial ply finished with 1.5mm thick laminate, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 01, item no. 2. (In Waiting Reception)
3	Providing and placing fully upholstered Three- seater Sofa of size - 2350 x 790 x 750 mm(H) with 4" Rubber Foam of Jindal, Sleepwell, MM Foam in seat and 3" Rubber Foam in back, fabricated out of Teak Wood wooden members. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 01, item no. 3. (In Waiting Reception)
4	Providing and placing static Single Seater Sofa. The dimensions of seat should be610(W) x 620 mm(D) and of back shall be 610mm(W) x 850 mm(H). The seat shall be made up Teak Wood and woven cane with additonal portable cushioned back and seat upholstered with fabric of approved make. The moulded polyurethane foam used in the seat and back shall be of density [45-55]+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The legs shall be made up of Teak Wood wood. The chair shall be fabricated correct to shape, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect sand to be manufactured strictly as per Drawing no. 01, item no. 4. (In Waiting Reception)
5	Providing and placing Teak Wood Corner Table of size - 750 x 750 x 450 mm(H). Table top shall have 4mm thick decorative Teak Veneer over 25mm (19 +6mm) thick commercial ply with Teak Wood edge lipping with Teak Wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 01, 02,03,04 & 05 item no. 5, 6, 8, 6 & 3 respectively. (In Waiting Reception, Meeting Room, Drawing & Dining CM Suit)
6	Providing and fixing Teak Wood Center Table of size - 1200 x 1200 x 450 mm(h). Table top shall have 4mm thick decorative Teak Veneer over 25mm (19 +6mm) thick commercial ply with Teak Wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 01, item no. 6. (In Waiting Reception, Meeting Room, Drawing & Dining CM Suit)
7	Providing and placing Receptionist Chair [Godrej (VERSA NEO MID BACK) or similar model of Durian/Nilkamal/WIPRO/VEILS make]. The overall dimensions of the chair shall be 76.1cm x 76.1cm x (98.6-116.1cm). The seat height shall be 44.5cm54.5cm. The cushioned seat and back is made of injection moulded Plastic outer and Inner. Plaster inner is upholstered with stitched cover and moulded high Resilience Polyurethane foam of density 45kg per meter cube. The stitched cover is made from spacer fabric and leatherette. Seat size shall be 47cm x 48cm. The Back size shall be 45cm x 60.5cm. The armrests top is moulded from PU and mounted on to a drop lift adjustment type tubular armrest support made of 3.8cm diameter x 0.2cm thick MS ERW tube. The chair shall be BIFMA level certified from BIFMA authorized certifier. The armrest height is adjustable upto 6.5cm in 5 steps. The chair shall be Green Guard certified from UL environment. The armrest structure is powder coated minimum 50 microns. It shall have active bio synchro mechanism with features like 360 degree revolving, front pivot tilt mechanism, tilt tension adjustment, 5-position tilt limiter, etc.. The chair shall be GRIHA certified. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is 6cm. It shall also have adjustable back support. Back frame is connected to Up/Down mechanism housed in plastic T spine. It can be adjusted fro 7.2cm for comfortable back support to suit individual need. The pneumatic height adjustment has an stroke of 10cm. The pedestal is injection moulded in black 33 % glass filled Nylon 66 and fitted with 5 nos. of twin wheel castors. The pedestal is 66cm pitch center dia complete in all respects. (In Waiting Reception)
8	Providing and placing fully upholstered Three- seater Sofa of size - 2350 x 790 x 750 mm(H) with 4" Rubber Foam of Jindal, Sleepwell, MM Foam in seat and 3" Rubber Foam in back, fabricated out of Teak Wood wooden members. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 02, item no. 1. (In Meeting Room)
9	Providing and fixing Teak Wood Center Table of size - 680 x 1200 x 450 mm (h). Table top shall have 4mm thick decorative Teak Veneer over 25mm (19 + 6mm) thick commercial ply with Teak Wood wooden legs 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 02, item no. 3. (In Meeting Room, CM Suit)
10	Providing and placing Teak Wood High Table of size - 1350 x 570 x 830mm(H). Table top shall have 4mm thick decorative Teak Veneer over 25mm (19 +6mm) thick commercial ply with Teak Wood edge lipping supported over 25 x 75mm block board members. Teak Wood wooden legs reducing legs 62.5 x 62.5 mm at top, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 02, item no. 4. (InMeeting Room)
11	Providing and placing Display Unit of size - 1800 x 530 x 830 mm(h). Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, Sliding cabinets made of 18mm thick commercial ply storage shall comprise of 2 rows of filing drawers, internal surfaces of drawers shall be finished with 0.8mm thick laminate, drawers shall be fitted with drawer slides, locks etc., ball catchers. Back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. Shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick Teak Veneer. Teak Wood wooden legs 62.5 x 62.5 mm at top and 40 x 40 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 02, item no. 5. (In Meeting Room)
12	Providing and placing Teak Wood Bed of size 1800 x 2100 mm made of 18mm plywood over 38 x 75mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative Teak Veneer over (12mm + 19mm) thick commercial ply with 35 x 4mm thick edge lipping with head board finished with quilting in leatherite over 50mm thick foam over 12mm thick commercial ply and edging in 50 x 25mm thick Teak Wood wooden band made to shape. Teak Wood wooden legs of size 100 x 100 mm with reducing ends, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no. 1. (In Bed Room CM Suit)
13	Providing and fixing Teak Wood Bed Side Table of size 600 x 450 x 530mm(H) to be finished in 4mm thick decorative Teak Veneer over 19mm thick commercial ply consisting of two drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. Teak Wood wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no. 1. (In Bed Room CM Suit)
14	Providing and placing fully upholstered Three- seater Sofa of size - 2000 x 900 x 800mm(H) with 4" Rubber Foam of Jindal, Sleepwell, MM Foam in seat and 3" Rubber Foam in back, fabricated out of Teak Wood wooden members. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03 & 05, item no.2. (In Bed Room CM Suit & VIP Dining)
15	Providing and placing fully upholstered Single seater Sofa with 2" Rubber Foam of Jindal, Sleepwell, MM Foam make in seat and back. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no. 3. (In Bed Room CM Suit)
16	Providing and placing fully upholstered Easy Chair with 2" Rubber Foam of Jindal, Sleepwell, MM Foam make in seat and back. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no.4. (In Bed Room CM Suit)
17	Providing and placing static Study chair. The dimensions of seat should be- 475mm(W) x 475 mm(D) and of back shall be 480mm(W) x 755 mm(H). The seat shall be made up Teak Wood and woven cane with cushioned back upholstered with fabric of approved make. The moulded polyurethane foam shall be of density [45-55]+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The legs shall be made up of Teak Wood. The chair shall be fabricated correct to shape and geometry, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03 & 06, item no. 5 & 2 respectively. (In Bed Room CM Suit & Guest Room)
18	Providing and fixing Coat stand made of Teak Wood as per image and drawing to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no.6. (In Bed Room CM Suit)
19	Providing and placing Cupboard of size - 1300 X 600 X 2100 (H) with vertical members fabricated out of 12mm commercial ply over 25mm commercial board finished with 0.8mm thick laminate on interior surfaces and 4mm thick Teak Veneer on exterior surface, shelves made of 18mm thick commercial ply complete in all respect as per drawing. The shutters shall have 25mm wide Teak Wood wooden louvers at 25mm c/c distance fixed on Teak Wood wooden frame (75 x 25mm), shall be fitted with self closing hinges, ball catchers, handles, locks of approved make, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no.9. (In Bed Room CM Suit)
20	Providing and Fixing of Dressing Table of size 1050 X 600 X 750 mm fabricated out of 4mm thick Teak Veneer over (6mm + 19 mm) thick commercial ply table top with 29 x 4mm thick Teak Wood edge lipping made to shape as per drawing with keyboard drawer made of 1mm thick laminate over 8mm thick commercial ply and Teak Wood edging made to shape. The drawers shall be fitted with drawer slides, handles, locks etc., shutters shall be fitted with self closing hinges, ball catchers, handles locks of approved make. Teak Wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no.9. (In Bed Room CM Suit)
21	Providing and fixing Teak Wood Luggage Rack of size 1050 x 600 mm x 450mm with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick Teak Veneer with 25 x 6mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm Teak Veneer over 8mm thick commercial ply, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect sand to be manufactured strictly as per Drawing no. 03, item no.9. (In Bed Room CM Suit)
22	Providing and fixing 1800 x 1100 mm LCD Unit (excluding LCD) fabricated out of 4mm thick decorative Teak Veneer over 19mm thick commercial ply finished in PU Polish. Additional unit consisting of drawer of size 1200 x 225 x 300mm depth fabricated out of 4mm thick decorative white oak veneer over 12mm thick commercial ply with 12mm thick toughened glass on top of 1800mm length and 300mm width, and all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 03 & 05, item no. 10 & 6 respectively. (In Bed Room CM Suit & VIP Dining)
23	Providing and Fixing of Study Table of size 1600 X 600 X 750 mm fabricated out of 4mm thick Teak Veneer over (6mm + 19 mm) thick commercial ply table top with 29 x 4mm thick Teak Wood edge lipping made to shape as per drawing with keyboard drawer made of 1mm thick laminate over 8mm thick commercial ply and Teak Wood edging made to shape. The drawers shall be fitted with drawer slides, handles, locks etc., shutters shall be fitted with self closing hinges, ball catchers, handles locks of approved make. Teak Wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 03, item no. 11. (In Bed Room CM Suit)
24	Providing and Fixing Tea/Coffee Unit of size 1000 x 600 x 830mm(H) with vertical members fabricated out of 12mm commercial ply over 19mm commercial ply finished with 4mm thick Teak Veneer. Vertical member over wall to be finished in 4mm Teak Veneer over 8mm thick commercial ply. Table top with pre polished 19mm thick granite (Cherry Red) with edges moulded, over 19mm thick commercial ply, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect sand to be manufactured strictly as per Drawing no. 03& 06, item no. 11 & 5 respectively. (In Bed Room CM Suit & Guest Room)
25	Providing and placing fully upholstered Three- seater Sofa of size - 2350 x 790 x 750 mm(H) with 4" Rubber Foam of Jindal, Sleepwell, MM Foam in seat and 3" Rubber Foam in back, fabricated out of Teak Wood wooden members. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 04, item no. 1. (In Drawing/Dining CM Suit)
26	Providing and placing static Single Seater Sofa. The dimensions of seat should be610(W) x 620 mm(D) and of back shall be 610mm(W) x 850 mm(H). The seat shall be made up Teak Wood and woven cane with additional portable cushioned back and seat upholstered with fabric of approved make. The moulded polyurethane foam used in the seat and back shall be of density [45-55]+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The legs shall be made up of Teak Wood. The chair shall be fabricated correct to shape, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 04, item no. 2. (In Drawing/Dining CM Suit)
27	Providing and placing static Teak Wood Dining Chairs. The dimensions of seat should be - 554 mm(W) x 560 mm(D) and of back shall be 471 mm(W) x 1020 mm(H). The seat shall be made up Teak Wood and upholstered with fabric and moulded polyurethane foam. The moulded polyurethane foam shall be of density [45-55]+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The back and legs shall be made up of Teak Wood, all exposed Wood/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 04, item no. 3. (In Drawing/Dining CM Suit)
28	Providing and placing Teak Wood Dining Table of size Table 2100 x 1200 x 750mm(H) . Table top shall have 1.5mm thick laminate over 25mm thick commercial ply, adequate hard wood framing members to support the top with Teak Wood edge lipping made to shape, legs to be made out of Teak Wood wooden members of size 75 x 75 mm on top and 50 x 50 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 04, item no. 4. (In Drawing/Dining CM Suit)
29	Providing and placing Display Unit of size - 1200 x 530 x 830 mm(h). Table top to be fabricated with pre polished 19mm thick granite top of approved shade with edges moulded, over 19mm thick commercial ply, Sliding cabinets made of 18mm thick commercial ply storage shall comprise of 2 rows of filing drawers, internal surfaces of drawers shall be finished with 0.8mm thick laminate, drawers shall be fitted with drawer slides, locks etc., ball catchers. Back to be finished with 0.8mm thick laminate over 6mm thick commercial ply. Shutters to be fabricated out of 19mm thick commercial ply finished with 4mm thick Teak Veneer. Teak Wood wooden legs 62.5 x 62.5 mm at top and 40 x 40 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respect and to be manufactured strictly as per Drawing no. 04, item no. 5. (In Drawing/Dining CM Suit & VIP Dining)
30	Providing and placing Dining Table of size 6000 x 1350 x 750mm(H) . Table top shall have 1.5mm thick laminate over 19mm thick commercial ply, adequate vertical 16 gauge SS pipe 75 x 75mm supported on base of twin 16 gauge SS pipes of 50 x 50mm support the top framing members of 16 guage SS pipe of 50 x 50mm, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 05, item no. 1. (In VIP Dining)
31	Providing and placing static Teak Wood Dining chair. The dimensions of seat should be- 420mm(W) x 450 mm(D) and of back shall be 420mm(W) x 880mm(H). The seat shall be made up Teak Wood and upholstered with fabric and moulded polyurethane foam. The moulded polyurethane foam shall be of density [45-55]+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The back and legs shall be made up of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 05, item no. 4. (In VIP Dining)
32	Providing and placing 900 x 2100 mm Teak Wood Bed made of 18mm plywood over 38 x 75mm hardwood members. Exterior surfaces to be finished in 4mm thick decorative Teak Veneer over 12mm + 19mm thick commercial ply with 35 x 4mm thick edge lipping with head board finished with 100mm wide x 12mm thick Teak Wood wooden panels to be fixed on 40 x 100mm wooden Legs with flat Nylon Castors made as per shape . Teak Wood wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 1. (In Guest Room)
33	Providing and fixing Teak Wood Bed Side Table 900 (w) x 450 (d) x 530mm (h). to be finished in 4mm thick decorative Teak Veneer over 19mm thick commercial ply consisting of one drawers finished with 0.8mm thick laminate on interior surfaces with drawer channel etc. Teak Wood wooden legs of size 75 x 75 mm with reducing ends, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 1. (In Guest Room)
34	Providing and fixing Teak Wood Side table of size 680 x 680 x 450 mm(H). Table top shall be fabricated out of 4mm thick Teak Veneer over 25mm (6mm + 19mm) commercial ply with 29 x 4mm thick edge lipping made to shape. Teak Wood wooden legs of size 50 x 50 mm at top and 25 x 25 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 3. (In Guest Room)
35	Providing and placing fully upholstered Single Seater Sofa with 2" Rubber Foam of Jindal, Sleepwell, MM Foam make in seat and back. The leatherite used shall be in the range of Rs 500 - 600 per metre. Arms and Legs to be fabricated out of Teak Wood, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 4. (In Guest Room)
36	Providing and Fixing of Study table of size 2100 x 570 x 750 mm(H) fabricated out of 4mm Teak Veneer over 6mm + 19 mm thick commercial ply table top with 29 x 4mm thick Teak Wood edge lipping made to shape as per drawing & to be finished in PU Polish. The drawer shall be fitted with drawer slides, handles, locks etc. of approved make. The top shall rest upon 25 x 75 mm Hard wood members over Teak Wood wooden legs of size 62.5 x 62.5 mm at top and 38 x 38 mm at bottom, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 5. (In Guest Room)
37	Providing and fixing 1700 x 600 mm x 450mm Teak Wood Luggage rack with vertical members fabricated out of with 12mm commercial ply over 19mm commercial ply finished with 4mm thick Teak Veneer with 25 x 6mm SS oval Strips fixed at 75mm c/c distance as shown in drawing. Vertical member over wall to be finished in 4mm Teak Veneer over 8mm thick commercial ply, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 6. (In Guest Room)
38	Providing and placing Cupboard of size - 600 X 1200 X 2100 (H) with vertical members fabricated out of 12mm commercial ply over 25mm commercial board finished with 0.8mm thick laminate on interior surfaces and Teak Veneer on exterior surface, shelves made of 18mm thick commercial ply complete in all respect as per drawing. The shutters shall have 25mm wide Teak Wood wooden louvers at 25mm c/c distance fixed on Teak Wood wooden frame (75 x 25mm), shall be fitted with self closing hinges, ball catchers, handles, locks of approved make, all exposed Wooden/Veneer work to be finished in PU Polish, complete in all respects and to be manufactured strictly as per design and Drawing no. 06, item no. 6. (In Guest Room)