|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding asdirected in :a) All kinds of soil |
| 2 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | Providing & laying cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 4 | Centering & shuttering including Strutting, Propping & removal of forms for :(i) Foundations, Footings, Bases for columns |
| 5 | (iii) Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan) |
| 6 | (iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels plinth beams not exceeding 1m in depth |
| 7 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 8 | b) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 9 | c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 10 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 11 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 12 | Providing and erecting Chain link mesh fencing 2.00 m height with G.I Chain link of size 2.5\"x2.5\" of 10 guage and fixed with 75mm gap above ground level to vertical M.S.channel of size 75x40x6mm embedded in cement concrete block of 1:1.5:3 grade of size 350x350x700mm at 2.25 m c/c with iron bar 16mm dia as hold fast including welding link with the frame usinghorizontal M.S. angles of 50x50x6mm size , 2Nos. placed at top & bottom in the gridincluding flats, primer,3 coats of oil painting etc. complete as per drawing and as directed by the Engineer in charge. |
| 13 | Fabrication and fixing of Aluminium composite panel cladding with thick 4mm/ 0.25mm ACP sheets, aluminium framework, with 50 X 25 X 1.2 mm thick sections. Silicon sealants etc. including accessories complete. |
| 14 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm seriesshutters section. |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 16 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 17 | Distempering with dry distemper of approved brand and manufacturer two or more coats ofrequired shade on new work over and including priming coat of whiting to give an even shade |
| 18 | Providing and fixing vitrified antiskid tiles(320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed ofcement mortar 1:3 and jointed with cement slurry complete. |
| 19 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 20 | Providing and laying jet black mirror polish granite flooring and dado over 20mm thick base of cement mortar 1:4 laid |
| 21 | Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 complete |
