Vellanadu Gp-2021-22-Pro.No.220-Roof Changing Of Anganawadies Vellanadu Gp-2021-22-Pro.No.220-Roof Changing Of Anganawadies
Tender Value
5.64 Lakhs
Estimated cost
Bid Submission
22 Aug 2022
0 days left
EMD
14123
Bank guarantee accepted
Document Fee
1130
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
vellanad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Vellanadu Gp-2021-22-Pro.No.220-Roof Changing Of Anganawadies Vellanadu Gp-2021-22-Pro.No.220-Roof Changing Of Anganawadies
BOQ
| Sl. No. | Item Description |
| 1 | 1. Roof |
| 2 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 3 | 51.20 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. |
| 4 | od1712612/2021_2022 : :Od-Supplying and fixing Rain water gutter 110 mm |
| 5 | 10.26.1 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube |
| 6 | 50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters |
| 7 | 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 8 | 15.7.1 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar |
| 9 | 50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 10 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | od1712625/2021_2022 : Od-Providing fixing Welded Mesh in Sqm |
| 12 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 13 | 13.71 : Lettering with black Japan pint of approved brand and manufacture |
| 14 | od1712863/2021_2022 : od688701/2020_2021 :Artistic wall painting with acrylic emulsion paint of approved brand and<br>manufacture,first coat as plain back ground and second coat as artistic or further coats to finish the picture<br>if necessary over a prepared even and smooth surface by applying one coat of water thinnable cement<br>primer of approved brand and manufacture.<br> |
AI Tender Summary
Tender Timeline
Aug 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender