Manufacturing, Supply Of Spares(Components) For India Mark - Ii Hand Pumps And 32Mm Dia Gi Pipes Confirming To Relevant Is Specification Included Against Them Including Revision If Any During The Currency Of Agreement Period For Delivery To Any Divisional-Andhra Pradesh

Manufacturing, Supply Of Spares(Components) For India Mark - Ii Hand Pumps And 32Mm Dia Gi Pipes Confirming To Relevant Is Specification Included Against Them Including Revision If Any During The Currency Of Agreement Period For Delivery To Any Divisional / Sub Divisional / Mandal Stores Anywhere In Prakasam District Including Bis Packing, Loading, Unloading And Stacking Charges. The Rates Shall Be Inclusive Of Packing, Forwarding, Delivering At Destination Etc., Complete But Excluding Gst. , Head Assembly With Third Plate Including Cover And Cover Bolts,Hex - Bolt M 12 X 40 As Per Is 1363,Hex - Bolt M 12 X 20 As Per Is 1363,Hex - Nut M 12,Washer (4Mm Thick) For M 12 Bolts,Front Cover,Third Plate,Handle Assembly Without Axle,Handle Axles With Two Nuts And One Washer 4Mm Thick,Plunger Rods 450Mm Long With Two Couplers M 12 X 40,Chain With Coupling,Spacer For Handle Assembly,Water Tank Assembly,Stand Assembly (Normal),Stand Assembly (Telescopic),Socket (Riser Pipe Holder),Connecting Rods 12Mm Dia 3M Length (Electro Galvanizing),Hex Bolt M. 10 X 1.5 X 40 Is-1364 (Part-I),12Mm Dia Rod Coupling,Chain Bolts And Nuts,Cylinder Body With Brass Liner (The Brass Liner Shall Confirm),Reducer Cap,Plunger Yoke Body,Upper Valve,Check Valve,Deep Well Hand Pump Components With Leaded Tin Bronze. Check Valve Seat,Spacer For Cylinder Assembly Suitable For Nitrite Rubber Pump Bucket,Follower,Upper Valve Guide,Check Valve Guide,Rubber Seating (Upper Valve),Rubber Seating (Lower Valve),Sealing Ring,Pump Bucket,Cylinder Assembly Complete Unit Inclusive Of Stainless Steel,Handle Axle Washer - 4Mm Thick To Suit M 12 As Per Is 2016,Prevailing Torque Steel Hex Lock Nut M 10 X 1.5 Is 7002 X 1972,Single Side Shielded Bearing Confirming To Is 6455-1972 Sil,Upper Valve Assembly With (2 No) Nitrite Rubber Pump Buckets,Lower Valve Assembly Comprising Rubber Seat Retainer, Rubber,Im - Ii Extra Deep Well Hand Pump Head Assembly,Im - Ii Extra Deep Well Handle Assembly Without Counter Weight,Im - Ii Extra Deep Well Hand Pump Cylinder Assembly,Counter Weight For Handle Assembly,Manufacture And Supply Of Galvanized Mild Steel Pipes (Medium Class) Of The 32Mm Nominal Bore Confirming To Is: 1239/Part-I/1990 Continuously Welded/High Frequency Induction Welded (Hfiw) Type And Screwed At Both Ends As Per Is: 554 And One End Fitted With Socket (Medium Class) Manufactured From Seam Less Pipe As Per Is: 1239/Part-2/1992 And Other End Fitted With A Plastic Cap And Delivery At Departmental Stores In Prakasam District. Each Pipe Should Bear Isi Mark And Manufacturers Trade Mark And Correct Length Of 3.00M + 0 Mm Or - 25 Mm Including Cost Conveyance Delivery At Destination. The Rates Shall Be Excluding Gst.

Refer document

INR 10000.0 /-

Refer document

Sl. No.	Item Name
1	Head assembly with third plate including cover and cover bolts
2	Hex - bolt M 12 x 40 as per IS 1363
3	Hex - bolt M 12 x 20 as per IS 1363
4	Hex - nut M 12
5	Washer (4mm thick) for M 12 bolts
6	Front cover
7	Third plate
8	Handle assembly without axle
9	Handle axles with two nuts and one washer 4mm thick
10	Plunger rods 450mm long with two couplers M 12 x 40
11	Chain with coupling
12	Spacer for handle assembly
13	Water tank assembly
14	Stand assembly (normal)
15	Stand assembly (telescopic)
16	Socket (riser pipe holder)
17	Connecting rods 12mm dia 3m length (electro galvanizing)
18	Hex bolt M. 10 x 1.5 x 40 IS-1364 (part-I)
19	12mm dia rod coupling
20	Chain bolts and Nuts
21	Cylinder body with brass liner (the brass liner shall confirm)
22	Reducer cap
23	Plunger Yoke body
24	Upper valve
25	Check valve
26	Deep well hand pump components with leaded tin bronze. Check valve seat
27	Spacer for cylinder assembly suitable for nitrite rubber pump bucket
28	Follower
29	Upper valve Guide
30	Check valve guide
31	Rubber seating (upper valve)
32	Rubber seating (lower valve)
33	Sealing ring
34	Pump bucket
35	Cylinder assembly complete unit inclusive of stainless steel
36	Handle axle washer - 4mm thick to suit M 12 as per IS 2016
37	Prevailing torque steel hex lock nut M 10 x 1.5 IS 7002 x 1972
38	Single side shielded bearing confirming to IS 6455-1972 SIL
39	Upper valve assembly with (2 No) nitrite rubber pump buckets
40	Lower valve assembly comprising rubber seat retainer, rubber
41	IM - II extra deep well hand pump head assembly
42	IM - II extra deep well handle assembly without counter weight
43	IM - II extra deep well hand pump cylinder assembly
44	Counter weight for handle assembly
45	Manufacture and supply of galvanized mild steel pipes (medium class) of the 32mm nominal bore confirming to IS: 1239/part-I/1990 continuously welded/high frequency induction welded (HFIW) type and screwed at both ends as per IS: 554 and one end fitted with socket (medium class) manufactured from seam less pipe as per IS: 1239/part-2/1992 and other end fitted with a plastic cap and delivery at departmental stores in Prakasam district. Each pipe should bear ISI mark and manufacturers trade mark and correct length of 3.00m + 0 mm or - 25 mm including cost conveyance delivery at destination. The rates shall be excluding GST.