Military Engineer Services-MES has published Special Repair To Overhead Tank And Provn Of Certain Sanctioned Works At Saa ( Phase-18 ) Under Ge ( S ) Tezpur. Submission Date for this Tender is 08-09-2022. Over Head Tank Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Aug-2022 | Amdt | Other | 01-09-2022 |
2 | 01-Sep-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-09-2022 |
Sl. No. | Item Description |
1 | Surface excavation n exc 30 cm deep and averaging 15 cm deep and gettion out in soft/loose soil.Complete all as specified and as directed. |
2 | M&L for hard core of guage not exc 63mm with broken bricks deposited spread & levelled in layers n exc 15cm thick, watered & ramed to a true surface.Complete all as specified and as directed. |
3 | Excavation in trenches n exc 1.5 m wide and n exc 1.5m depth for foundation and getting out in hard/dense soil for foundation etc.Complete all as specified and as directed. |
4 | Returning filling incl spreading levellig watering and well ramming in layers not exc 25 cm for soft/loose soil.Complete all as specified and as directed. |
5 | Removing excavated material n exc 50m nd depositing where directed at a level n exc 1.5m above the starting point.Complete all as specified and as directed. |
6 | Demolition in cement concrete (unreinforced) in ground floor and paving n exc15cm thickness (below or above ground level) all as specified and directed |
7 | M&L PCC 1:4:8 type D2 Cement concrete in foundations filling and mass concrete complete all as specified and as directed |
8 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copingand like including waterhreing slightly rounded or hamfered angles and throating as directed including formwork Complete all as specified and as directed. |
9 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels drains including all necessary form work complete all as specified and directed |
10 | M & L for PCC 1:3:6 ( 20 m graded stone aggregate) as sub floor, sub baseeven and rough to recieve the topping layer all as specified and directed |
11 | M&L Pre cast RCC (1:2:4)type B1 using 20mm graded stone aggreate for cover slab of mahole/soak pit etc set in cement mortrar 1:4 complete all as specified and as directed by Eing-in-Charge |
12 | M & L for Rainforced cement concrte M-20 (design mix) type B1 20 mm graded aggregate , roof beam cantilevers, lintels,slabs, balconies, canopies, deck slabs etc. or in similar articles upto 5th floor level all as specified and directed |
13 | Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, all as directed |
14 | M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking bending for columns hooking ends and binding with mild steel wire.Complete all as specified and as directed. |
15 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.Complete all as specified and as directed. |
16 | S&F aluminium magnatic water level indicator display type including fittings fixture for RCC overhead tank staging height 18 to 21 mtr complete all as specified and directed |
17 | Demolition of Brick work or stone/boulders masonry built in cement mortar complete all as specified and as directed by the Engr-in-Charge |
18 | Material and labour for bricks work masonry using sub class B bricks straight or curved on plan exc 6 mm mean radius built in cement mortar (1:6) having compressive strength not less thant 75 Kg/sqcm all as specified and directed |
19 | Material and labour for sub Class Bbricks bricks, straight or curved on plan to any radius in halfbrick thick wall built in cement mortar ( 1:4) having compressive strenght notless than 75 kg/Sq cm all as specified and directed. |
20 | Dismantling structural steel work including door,gates but exculding framed truss etc complete all as specified and ditected by Engr-in-Charge |
21 | S&F framed work as door or gates of hollow tubular or other sectin with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed by Engr-in-Charge |
22 | S&F frame work such as grills grating etc with ends of bar shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors , ladders framd balusters, wal ways railings framework of water tanks and similar works conforming to Fe 290, Ged-165 all as specified and as directed by Engr-n-Charge |
23 | S&F framed work as in ladders, stairs including stringers ,treadrs ,handrails etc including brackets ,cleats, base plateetcand similar articles confirming to Fe 290 Gde E-165complete all as specified and directed |
24 | S&F plates (plain or chequred ) channel square cut or notched (ordinary and coounter sunk) forming holes without any attachment conforming to Fe 410-W (Gde-E-2500 quality-A complete all as specified and as directed by Engr-in-Charge |
25 | Taking down cement or cement lime plaster on brick or stone walls etc incl racking out joints hacking for key scrubbing down with water etc complete all as directed by Engr-in-Charge |
26 | M&L 15mm thick rendering in C.M (1:4) on fair faces of brick work finished even and fair without using extra cement.Complete all as specified and as directed. |
27 | M&L for 10 mm thick plaster in CM 1:3 on fair face of brick wall finished even and smooth without using extra cement complete all as specified |
28 | M&L for 10 mm thick plaster in ceiling of CM 1:3 on brick wall finished even and smooth without using extra cement complete all as specified |
29 | M&L preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetci enamel paint.Complete all as specified and as directed. |
30 | M&L for preparation on new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxideprimer complete all as specified and directed |
31 | M&L for complete removal of exisitng treatmen on old painted surfaces of walls with wire brushed/gunny bags etc ans washing the surface with water mixed with bleaching powder and applying a layer of external wall cement putty to achieve smooth surface and applying two coats of weather proof exterior emulsion paint over a coat of primer by smart painting method. all as specified and as ditected Note : The exterior emulsion weather coat paint as specified shall be applied with roller only |
32 | M&LApplying one coats of Oil bound (Acrylic) distember by smart painting method to old plastered wallincludingpreparation of old plastered or un plastered of surface of wall all as specified and directed. |
33 | M&L applying two coats of Oil bound disteber by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coate of primer including complete removal of existing treatment all as specified and directed |
34 | M&L for preparation of newly plastered surface of ceiling and applyng two coasts of oil bound distemeper of approved tint over a coat of 1mm thick wall care putty by smart painting method on ceiling complete all as specified and directed |
35 | M&L for preparation of new undecorated surface of wall and applying two coats of cement base painton wall.Complete all as specified and as directed. |
36 | Application of weather proof exterior emulsion on OH Tank (Approc 13.5 Lakh Ltrs) capacity on 21.6m high staging : M&L for complete removal of existing treatment by grinding the surface before preparation of surfaces of old painted surface by cleaning, rubbing with gunny bags and wasing the entire surface with water mixed with bleaching powder and applying two coasts of weather proof exterior emulusion paint (1st quality) by smart painting method entire surface of old tank incl columns, beams cross beams above slab, exterior surface of tank.The rate quoted by the contractor included all scaffolding arrangement to carryout the work on exterior surface of 3 Lakh GIn OH Tank.The second coat of paint shall be applied after getting the lst coat approved by the Engr-in-Charge.The application of paint shall be done with roller only.The contractor shall arrange all safety belt and all other equipment like helmets etc and shall be fully responsible for the safety of the labour.The contractor is advised to visit the site and work out the requirement before quoting the rates.The rate also includesminor repairs requested and nothing extra shall be cleaned by the contractor Note :- The work shall be got executed by the authorised applicator of manufactures as approved by GE before commencing the work. |
37 | Application of weather proof exterior emulsion on OH Tank (Approc 13.5 Lakh Ltrs) capacity on 21.6m high staging : M&L for complete removal of existing treatment by grinding the surface before preparation of surfaces of old painted surface by cleaning, rubbing with gunny bags and wasing the entire surface with water mixed with bleaching powder and applying one coasts of weather proof exterior emulusion paint (1st quality) by smart painting method entire surface of old tank incl columns, beams cross beams above slab, exterior surface of tank.The rate quoted by the contractor included all scaffolding arrangement to carryout the work on exterior surface of 3 Lakh GIn OH Tank.The application of paint shall be done with roller only.The contractor shall arrange all safety belt and all other equipment like helmets etc and shall be fully responsible for the safety of the labour.The contractor is advised to visit the site and work out the requirement before quoting the rates.The rate also includesminor repairs requested and nothing extra shall be cleaned by the contractor Note :- The work shall be got executed by the authorised applicator of manufactures as approved by GE before commencing the work. |
38 | M & L for cleaning the surface (inside of RCC OHT) RCC slab with wire brush or mechanical floor grinder and air bloweretc to remove loose particle from the surface of water proofing treatment at site and after cleaning, the whole slab to be cleaned with water and will be left for drying incl opening up the cracks and widening the same with hand grinder in V shape and repairing the same with hybrid PU sealant (upto 40mm) and for larger cracks first apply a bond coat of repair polymer and then apply two coat of single component elastromeric anticarbonation aliphatic acrylic coating system complelet all as specified and directed. |
39 | M & L forproviding chemical injection treatment in the form of pressure grouting to the construciton joint and cracked portion at 1.5 m c/c by injectiong cement slurry mixed with Asian paint or equivalent brand smart care injction grout additive for cement in the required consistency through the prefixed PVC nozzles in the 18 mm di holes, fixing the nozzles with instant setting cement including providing gola 75x75mm in cement concrete 1:2:4 incl finishing with cement mortar 1:3 complelet all as specified and directed. |
40 | M & L for providing a non wooven geo textile of 60 gsm between the first and second layer of the coating as an additional reinforcement complete all as specified and directed |
41 | M&L for providing of two component acrylic polymer modified cementitious flexible waterproof coating Asian paint or equivalent brand Smart Care Dampblock 2k applied in three coat to form a total thickness 1.5mm with a minimum elongation of 100% after base preparation of cleaning brushing and removal of flaky materials, grouting the porous area with cementitious grout, fixingof weep holes, grouting a pipe of outlets etc. Teh coating shall be applied at intervals and as per the manufacurers specifications and approved by consultants.Work to be excuted by specified company complete all as specified and directed |
42 | M & L for providing protection plaster of 12.-15 mm as per actual requirement with polymer modified mortar using Asian Paint or equivalent brand Smart Care Vitalia as per manufactures specifications approved by consultants complete all as specified and directed Note for ser item No 36 to 42 :- The work shall be got executed by the applicator of approved manufacturer.The contractor shall produe MOU with the manufacturers for execution of above items.The written guarantee for 10 years shall be given by the manufacturer. |
43 | M & L precast cement concrete type B0 1:2:4 louversand jallies, 25 mm thick set in cement mortar 1:4complete all as specified and directed |
44 | M & L PCC type B-2, 1:2:4 (40mm graded aggregate) 50mm thick as in floor complete ass as specified and as directed |
45 | M & L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregated as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.8 mtr and corner and filled with bituminous filler complete all as specified and as directed |
46 | Taking down existing window of area exc 1.0 Sqm but not exc 2.00 Sqm ., without taking down shutter from frame all as specified and as directed. |
47 | Taking down existingshutter of area exc 1.0 Sqm but not exc 2.00 Sqm., and refixing in same opening after resecuring and adjusting all as specified and as directed. |
48 | Refixing of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and directed |
49 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction. |
50 | S&F Anodised aluminium frame (Powder coated 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed |
51 | Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. ccomplete all as specified and directed |
52 | S&F Anodised aluminium (Powder coated 50 micron)window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws including locking arrangment adjustable roller 02 to 03 Nos on each shutter, fasteneretc.complete all as specified and directed |
53 | S& F 5.0 mm thick sheetglass ordinary/tinted quality and glazing with oil putty in squaresexc 0.5 sq. m in each panein squares.complete all as specified and directed |
54 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples.complete all as specified and directed |
55 | S&F stainless steel handles fancy types, 128 mm size.complete all as specified and directed |
56 | S&F magnetic catch suitable for cabinet and shelves fixed with screw.complete all as specified and directed |
57 | S & F continuous(Piano) hinges 30 mm width mild steel ,bright finishfixed with screw complete all as specified and directed. |
58 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
59 | Roughening surafces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified and directed |
60 | M&L Non skid glazed Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15mm thick screed bed in CM 1:4.complete all as specified and directed |
61 | All as per item No 60 above but in skirting over 10mm thick screeding in cement mortar 1:3. |
62 | S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 10 mm screed bed in Cement mortar (1:4)complete all as specified and directed. |
63 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 |
64 | All as per item No 63 above but in skirting over 10 mm thick screeding in cement mortar 1:3. |
65 | M&L Machine pressed precast concrete interlocking paver block (Glazed finish) with Grey cement and pigment any shape size confirming to IS 15658-2006 to 60 mm thickness, M-35 Grade.complete all as specified and directed |
66 | M&L for chequerred cement concrete tile of size of 300 x 300 x 22 to 25 mm thick with grey cement and pigment set and jointed and pointed in neat cment slurry in floors laid over & including 15mm thick screed bed in cement mortar 1:6.complete all as specified and directed |
67 | Supply and fix 110mm bore PVC (SWR) pipe single socketed with rubber ring joints fixed to wall or laid in trenched or floor.complete all as specified and directed |
68 | S&F 6-10 mm thick PVC Hallow panels with 0.5 mm plain PVC Sheet suitably placed in wall incliding same and matching colour wall angle,u clip and jointer as in ceiling and wall as per specification and drawing.complete all as specified and directed |
69 | S&F PVC Board 18 mm thick,exterior grade fixed with screw.complete all as specified and directed |
70 | Supply & fix in repair 20mm dia anodised aluminium alloycurtain rod with two Nos of socket complete for doors/window opening all as specified and directed. |
71 | Material and labour for point wiring for one light/call bell/fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn with PVC Concealed conduit with all accessories incl 1.5 Sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity conn ected to common earth dollyh complete with chasing cutting to surface of wall, re-plastering and colour washing as per existing sunk cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such asswtich , socket and speed regulatro with 3mm thick laminated bakelite sheet (Make "Hylum) cover all as specified and directed by Engr-in-Charge.Note :- Quoted rate whall be included chasing/cutting/plastering/painting etc to surface of wall (if required) |
72 | All as per Item No 71 here-in-before but wiring with 4.0 sqmm including 2.5 sqmm PVC insulated, unsheathed multistanded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected common earth dolly for one 3/5 pin 15 Amps socket out let on independent board |
73 | All as per Item No 71 here-in-before but for One 3 pin 5 Amp socket outlet on the same board |
74 | All as per Item No 71 here-in-before but for One 3 pin 5 Amps socket out let on independent board |
75 | S&F modularswitch, 16 Amp flush type 1 module all as directed/ specified.Make- Anchor/ Havells/Bajaj/ CG |
76 | S&F modularsocket outlet, 3 pin, 6/16 Amp flush type 2 module all as directed/ specified.Make- Anchor/ Havells/Bajaj/ CG |
77 | S&F of modular switch flush type, 6 Amp. SP, one way ,1 module all as directed specified. Make- Anchor/ Havells/Bajaj/ CG |
78 | S&F in repair of modularbell push, flush type, 5 Amp,1 module all as directed/ specified.Make- Anchor/ Havells/Bajaj/ CG |
79 | Supply and fix, mello- music bell moduler type, AC 230 volts single pole complete all as specified and directed. Make :- Havells Cat No. AHLDBW000 or equivelent Anchor-Woods/Legrand/ RR Kabel Ltd / MK Honey wail /Schneider / C&S Electric Ltd |
80 | S&Fof modular metal flush box of module 1/3/2 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed. |
81 | S&F of modular metal flush box of module 4 flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed. |
82 | S&Fof modular metal flush box of module 6 /8flush ISI marked make - Havells or equivalent make of Anchor all as specified and directed. |
83 | S&Fof modular white cover plate with frame of module 1 flush ISI marked Havells or equivalent make of Anchor all as specified and directed. |
84 | S&Fofmodular white cover plate with frame of module 2/3flush ISI marked Havells or equivalent make of Anchor all as specified and directed. |
85 | S&Fofmodular white cover plate with frame of module 4 flush ISI marked Havells or equivalent make of Anchor all as specified and directed. |
86 | S&Fof modular white cover plate with frame of module 6 ISI marked Havells or equivalent make of Anchor all as specified and directed. |
87 | Supply and fix ceiling rose surface backelite 65x50 mm having3 terminal.complete all as spacified and directed. |
88 | Supply and fix,of including taking down lamp holder insulated body with back plate batten/angle fittings all as specified and directed |
89 | Supply and Fixing including taking down wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make Havells Cat No LUMILINEBS20WLED865SPCWH or equivalent in Philips/Havells/CG/Orient all as directed by EIC. |
90 | S& F ceiling fan of sweep not less than 1200mm with hanger in replacement of existed old vintage unseviceable ceiling fan as specified and directed. Make- Crompton, cat No 1200MM ENERGION Riviera (w/o remote) as per CPWD or equivalent in Havells/Bajaj |
91 | Supply and fix ceiling fan regulator Electronic rotary Step type 80 wattsingle phase A/C 230 volts all complete as specified and directed |
92 | Supply and fixing wall mounting industirial socket incl top plugwith suitable straight plug, 180 to 250 volts, 2 poles (2P+E) , 20 Amps, Tempra Pro IP 67to used as single phase industrial load complete all as specified and directed. Make :- Schneider cat No . PKF32W734+ PKE32M723 in equivelent in L&T/ Seimens |
93 | S&FofMCB DB single pole and natural 8 way double door with 200 amps rated bus bar.Make : havells/Legrand/L&T/Merlin Gerin/Standard |
94 | S&Fof MCB SPN 40-63A, 240 Volts, 50 hz, 10 KA "c" series.Make : havells/Legrand/L&T/Merlin Gerin/Standard |
95 | S&F ofMCB SP 6 to 32 Amps 240 volts having "B" series complete Make : havells/Legrand/L&T/Merlin Gerin/Standard |
96 | Supply, installation, testing and commissioning of splittype Air conditioner electric driven 240 volt grade,50 Hzssingle phase 5star rated,energy saving 2 Ton capacity cordless remote controll unit with built air ioniser andinvertor tecnologyfor better indor air quality complete with all fixingfactory made steel stand set for mounting to out door unitnut ,bolt , washer etc and insulating materiels ,making all electric connectionas specified and directed by Engr-in-charge. Note: Quoted rate shall be included the rate of copper tube upto required length and factory made out door unit mounting bracket with fixing nut, bolt and other at site. Make : Voltas 245VADZ of equivalent in Godrej/Blue star/LG/Hitachi/Daikin |
97 | Supply and fixing and connecting of fully automatic single phase naturally air cooled indoor type wall mounting type digital voltage stabilizervoltage variation between 170 to270 voltswith output voltage stabilizer at 230 v with accuracyof +/- 2.5% of capacity 5 KVA(suitable up to 2 Ton or 24000 Btu/Hr) W TDR all as specified and directed Make : V-Guard model VD 500 in equivelent Mocrotek/AE Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractor"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor"s firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail