Haryana Urban Development Authority-HUDA has published Replacement Of Hpsv Sodium Lights 1X250 Watt And Steel Tubular Pole 9 / 10 Mtr. Long With Led Flood Light Fitting 100 Watt And 9 Mtr. Long Octagonal Pole On 45 Mtr. Wide Outer Road Of Sector-4-Ii And 5, U / E, Karnal. ( Including Three Years Fr. Submission Date for this Tender is 05-09-2022. Halogen Light Tenders in karnal Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.1.9:- 4 pole MCCB 6 amp to 100 amp , 25 K |
| 2 | 23.22.5.1 Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 23.22.5.1:- 6 amp. to 32 amp Single Pole |
| 3 | 24.5.1 Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. 24.5.1.1Submersible Copper Cable 3 Core 1.5 sqmm |
| 4 | 22.91 Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to 0.30m to 1.00m depth and refilling etc. 22.91.650 mm dia nominal bore |
| 5 | 24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 6 | 24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 7 | 24.1.12 Supplying and laying 6 S.W.G G.I. wire at 0.50 m below ground level from earth electrode including thimbles, soldering etc. as required. |
| 8 | 23.27 Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1 :2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineerin-charge of the work:- 23.27.4M.S. pedestal of size 900 mm wide, 1500 mm high, 450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1050 mm x 600 mm x 200 mm above ground level ,having a base of size 1200 mm x 750 mm x 250 mm below ground level . |
| 9 | 24.5.2 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HOPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. 24.5.2.3DWC/HDPE pipe 63/50 mm outer dialinner dia |
| 10 | 24.4.8 Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 24.4.8.79 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm. |
| 11 | N.S. Item Supply Erection of PVC insulated and sheathed underground cable, loose in existing pipe or trenches 1100 volts core having solid aluminium conductor wires confirming to IS: 694 including making necessary connection complete in all respect up to entire satisfaction of the Engineer-in-charge. (xl)16 sqmm. 4 core cable (Armoured.) |
| 12 | (xli)25 sqmm. 4 core cable (Armoured.) |
| 13 | Appd. Item Supply & Erection of Sensor based AMSON’s/ Indo Asian make automatic Electronic timer to Switch ON/OFF the street / Road light automatically. It will change switching ON/OFF timings automatically on daily basis throughout the year as per change in timing of sun rising and sun setting suitable for street/ Road lights. It will have three contractors of 24 Volt of BCH (Bhartiya Cutler Hammer) to control load upto 40 Amp. Per phase with voltage ratio @230/240. It will have light activated automatic Switching system to switch ON/OFF of the Road street lights. It will have Auto/ manual systems for maintenance of street light during day time. It should have Transformers with voltage ratio 230/240 and other allied accessories as required. Bakelite sheet to assemble the components etc. It should have Kit Kat of 20 Amps capacity to save the time switch from power fluctuation. The device will be housed in the existing pedestal/box/pole etc. in such a way so that it operates at correct timings and erection of the same at site complete in all respect upto the entire satisfaction of Engineer-In-Charge. |
| 14 | Appd. Item Supply & Erection of Hot Dip Galvanized bracket 1500 mm overhang made of 3.25 thickness sheet 50mm dia (ID) M.S. Pipe welded to 450 mm long Octagonal canopy with an angle of inclination of 105o to the vertical. The top end of canopy should be closed made of M.S. sheet of 16 SWG, 25 mm dia M.S. Pipe 2mm thickness sheet should be welded diagonally at top side of bracket & between arm & canopy. The bracket should be as per design attached. Double Arm Bracket |
| 15 | Appd. Item Execution/ Trench less digging for laying of HDPE pipe (Excluding cost of pipe) complete in all respect upto the entire satisfaction of Engineer-In-Charge. |
| 16 | Appd. Item Supply and erection of LED Flood light Luminaires 100 Watt of Makes: Bajaj of Model BJFL 100W LED I or other equivalent make & model Phillip’s/GE/ Bajaj/LT with lense with high power LED street light in aluminium PDC housing, toughened glass cover with IP 65 protection complete assembly with LED driver and accessories required to complete the job in all respect including erection and fixing including connection and other petty material for the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect)(Including Three Years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. |
| 17 | Appd. Item Credit of Dismantlement of Old Flood Light HPSV fitting 250 Watt complete in all respect. |
| 18 | Appd. Item Credit of dismantled old S.T. Poles 10 Mtr. Long (Swaged type) Single bracket(20 Nos. x 100.75 Kg. Per Pole) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
