Supply And Installation Of Furniture For Krushi Bhawan, Bbsr Supply And Installation Of Furniture For Krushi Bhawan, Bbsr , Providing Fitting, Fixing And Installation Of Godrej Make Workstation - System Offered • Wish Panel Thickness· 52.4 Mm / 23 Mm H, Khordha-Odisha

Supply And Installation Of Furniture For Krushi Bhawan, Bbsr Supply And Installation Of Furniture For Krushi Bhawan, Bbsr , Providing Fitting, Fixing And Installation Of Godrej Make Workstation - System Offered • Wish Panel Thickness· 52.4 Mm / 23 Mm Ht. -1200 Mm Approx Tile Configuration For Panels: Top Tile : Fabric Magnetic & Whiteboard ( 52 Mm ) Fabric Magnetic ( 23 Mm ) Intermediate Blocks -2 Nos Dl, Bottom Tile : Metal. Prelam Board Thk. • 25Mm; At Height 750Mm & Of Dimensions Recta - 1200 Mm Wx600 Mmd -1 Nos Novametal Pedestal 3Dr-2B+Lf, Size Of 390W X 646H X 585 D Metal Kbpt Cputrollycomplete As Per Approved Drawing And Specification Including Cost Of All Materials , Labour And Transportation As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Providing Fitting, Fixing And Installation Of Godrej Make Aero· Large Seat Depth : Seat / Back Assembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn. * Seat Size ( Larger Seat Depth ) : 47.0 Cm. ( W ) X 51.5 Cm ( D ) .“ Seat Size ( Standard Seat Depth ) 47.0 Cm. ( W ) X 49.5 Cm. ( D ) . * Back Size : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) . High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression. Armrests : The Adjustable Armrest Is Designed With The Following Features : • Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. • Fixed Armrest Top Is Pu Moulded Over Metal Insert. Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features.• 360° Revolving Type.• Single Point Control.• Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort.» Tilt Tension Adjustment.• 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°.Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Centerdia Is 66.1+0.5 Cm. Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nyloncomplete As Per Approved Drawing And Specification Including Cost Of All Materials , Labour And Transportation As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) , Providing Fitting, Fixing And Installation Of Godrej Make Enterprise 1500 Table With Cpu Hanger Size Shall Be1500mm Widthx 750Mm Depth X 728 Mm Height. Top Shall Be18 Mm Thick Pre Laminated Particle Board All Work Surface Edges Shall Be Having Duly Sealed With 2 Mm Thick Pvc Edgebanding. Understructure Modesty Panel 18 Mm Thick Pre Laminated Particle Board . The Rectangular Frame Shall Be Fabricated Component In 1.2 Mm Thick Crca , Finish : Powder Coat ( Epoxy Polyster ) . Leg Shall Be Fabricated Component In 38 Mm X 25 Mm 1.2 Mm Thick Ms Erw Atube , Finish Powder Coat ( Epoxy Polyster ) .The Plastic Cap For Cable Travel Shall Be Injection Moulded Polypropylene And Leveler Glide For Shall Be Nylon 6 & Ms Bolt. The Storage Shall Be Having Shell And Drawer Tray 0.6 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus The Drawer Front Shall Be 0.8Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Plus Lock With 10 Lever And Handle And Leveller. The Wire Management Shall Be Horizontal Wire Carrier 0.7 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) And Vertical Wire Carrier 0.8 Mm Thick Crca Finish Powder Coat ( Epoxy Polyster ) Complete As Per Approved Drawing And Specification Including Cost Of All Materials , Labour And Transportation As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) . , Providing Fitting, Fixing And Installation Of Godrej Makeaero Large Seat Depth Revolvfng Chair With Headrest. Seat / Back A Ssembly: The Seat Is Made Up Of 1.2 + 0.1Cm Thk. Hot Pressed Plywood Measured As Per Qa Method Described In Ocp-Qlta-Pl14-18.The Back Is Made Up Of Injection Mou1ded Glass Filled Nylon & Upholstered Using Mesh Fabric With High Tenacity Yarn. * Seat Size ( Larger Seat Depth ) : 47.0 Cm. ( W ) X 51.5 Cm ( D ) . “ Seat Size ( Standard Seat Depth ) 47.0 Cm. ( W ) X 49.5 Cm. ( D ) . * Back Size : 45.0 Cm. ( W ) X 65.3 Cm. ( H ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Seat Foam Is Moulded With Density 45+ / -2 Kg / M° And Hardness 16 + 2 Kgf As Per Is:7888 For 25% Compression. Armrests : The Adjustable Armrest Is Designed With The Following Features :• Up-Down Adjustment— 8 Steps ( 8 0+0.Scm Range ) . • Height Adjustable Armrest Structure Which Is Powder Coated & Fitted With An Armrest Top. • Fixed Armrest Top Is Pu Moulded Over Metal Insert. Lumbar Support Assembly: The Lumbar Support Consists Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric.The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pa6. Lumbar Pad Has An Adjustment Of 8.0 + 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Is Designed With The Following Features. • 360° Revolving Type. • Single Point Control. • Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. » Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat / Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment. The Pneumatic Height Adjustment Has An Adjustment Stroke Oi 10.0 + 0.3 Cn°. Pedestal Assembly : The Pedestal Is Injection Moulded In Black 30% Glass Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. H=The Pedestal Pitch Centerdia Is 66.1+0.5 Cm. Twin Wheel Castors: The Twin Wheel Castors Are Injection Moulded In Black Nylon Complete As Per Approved Drawing And Specification Including Cost Of All Materials , Labour And Transportation As Per Direction Of Engineer-In-Charge. ( Excluding Gst ) . , N.B - The Bidders Are Required To Quote Their Rates Excluding Of Goods & Service Tax ( Gst ) . Gst As Applicable Will Be Paid Extra. The Existing Rule Of Govt. And Any Amendment Made In Future Will Be Followed.

INR 7080 /-

Refer document