Construction Work Of Boys And Girls Toilet At Gsss Deri Block-Nayagaon Udaipur
Tender Value
5.97 Lakhs
Estimated cost
Bid Submission
23 Aug 2022
0 days left
EMD
11940
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nayagaon → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Work Of Boys And Girls Toilet At Gsss Deri Block-Nayagaon Udaipur
BOQ
| Sl. No. | Item Description |
| 1 | PART A ( CIVIL WORK) BASED ON PWD BSR 2019 UDAIPUR CIRCLE |
| 2 | Earth Work in excavation in foundation trench or drains including dressing of sides & ramming of bottoms,lift up to 1.5 m. including taking out the excavated soil & depositing & refilling of jhiri with watering & rammingand disposal of surplus excavated soil as directed with in lead of 50 m. ( all kinds of Soil) |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade using stone aggregate 40mm nominal size (Handbroken) in foundation plinth , excluding the cost of centering & shuttering, using 1:4:8 Nominal mix. |
| 4 | Random Rubble Stone masonry forfoundation and plinth in cement sand mortar above 30cm thickwall in cement sand mortar 1:6mix. |
| 5 | Providing& laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost pf centering and shuttering. All work upto plinyh level using crusher broken aggregate. M-15 Grade(1:2:4) 20mm aggregate |
| 6 | Brickmasonarywork in super structure up to third storeyincementmortar1:6 withbricks of class designation75 Add extra over respective itemsall type of bricks for using clay fly ash bricks. |
| 7 | Half brick masonry in super structure using bricks of designation 75 in cement mortar 1:6 Add extra over respective itemsall type of bricks for using clay fly ash bricks. |
| 8 | P&F T - iron / angel doors frames for doors window and ventilation of mild steel Tee-section, jionts mitred and welded with 15x3 mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) or with wooden plug and screw or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer |
| 9 | Providing and fixing M.S.steel Single leaf shutter in angle iron frame 35x35x5mm suitabilly diagonally bracked with 35x3mm flat iron above & below lock rail of size 50x5mm beading extra including all fittings,including two coats of anti-corrosive red oxide primer paint M.S. sheet 20 S.W.G. |
| 10 | Random rubble dry stone kharanja under floor |
| 11 | Providing & laying in postion cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shutering-all work up to plinth level. M 10 (1:3:6 Nominal mix) 20 mm Aggregate |
| 12 | Providing & Fixing Ist quality standard White/Ivory ,grey,fuma red brown,light green, light blue and other light shades Glazed Tiles (conforming to IS : 13753& IS 13622) of size 300mmx200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster onwalls and pillars ) |
| 13 | Providing & Fixing Ist quality MAT finished ceremic tiles size 300X300 mm conforming to IS 13755 & IS 15622 colour such as White,Ivory ,grey,fuma red brown, in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) |
| 14 | PLASTERon new surface on wall in cement sand mortar 1:6 including ranking of joints etc. complete fine finished 20mm thick. |
| 15 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement forBeams, suspended floors, roofs, griders having slopes up to 15° , landings,balconies , shelves ,chajjas, lintels, bands ,plain window, sills ,staircases and spiral staircases M 20 grade nominal mix ( with graded stone aggregate 20mm nominal size) |
| 16 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for foundation, footings, strap beam, raft, base of column etc |
| 17 | Centering & shuttering with steel plates including strutting , propping, barcing both ways with wooden members and removal of form work up to floor three level for:Suspended floors, roofs, landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blockes sills, chhajjas, lintel, beams etc. |
| 18 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three levelThermo mechanically treated bars (conforming to relevant IS:1786.) |
| 19 | 6 mm cement plaster to ceiling of mix 1:3 ( 1 cement : 3 fine sand) |
| 20 | Grading for roof water proofing treatment with cement concrete 1:2:4 with water proofing compound as per manufacture\"s specification |
| 21 | PANTING ON DOORS & WINDOWS Painting with Enamel paint of approved brand and manufacture in all shade on new steel work (2 or more coat ) |
| 22 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade two or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. |
| 23 | Providing and fixing angle iron frame 25x25x3mmfor ventilators with fixed wire gauge 16 mesh 24 gauge including 10 mm square bars at interval of 100 mm welded screwed to frame with metalbeading 20x3mm complete in all respect as per design. |
| 24 | PART-B (Sanitary Work) Based on BSR PWD - 2019, Circle Udaipur |
| 25 | Providing and fixing Indian Type white glazed vitreous china 1st Quality W.C. Orissa Pan (I.S. 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor size 580x440mm. |
| 26 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & making good the wall.: Size 510mm x 400 mm |
| 27 | P&F I st quality WVC urinal ( IS:2556 mark) with 25 mm dia G.I waste pipe, dome waste couplings, concealed iron brackets or screw etc. complete Flat back small size 456x355x265 mm |
| 28 | P&F WVC Half-Round Channel of approved make in CM 1:3 joints finished in white cement of size 100 mm dia |
| 29 | P&F Bib cock (IS:8931 Mark), superior quality of approved make.Brass 400 gm, 15mm nominal bore. |
| 30 | P&F Inlet connection (Angle Valves) Superior quality of approved makefor wash basin, gyser etc. C.P. Inlet connection 15mm Brass (IS:8931 Marked). |
| 31 | P& F rigid PVC Pipe (IS 4985 Mark) Class 2nd /(4 kg /sqcm) approved quality / Make including joining the pipe with solvant cement rubber ring and lubricant 110 mm dia. |
| 32 | P&F rigid PVC pipe fittings (IS4985 mark) of approved quality/ make including joining the pipe with solvant cement rubber ring and lubricant : Bend 87.5 110mm dia. |
| 33 | P&F rigid PVC pipe fittings (IS4985 mark) of approved quality/ make including joining the pipe with solvant cement rubber ring and lubricant : Bend 45 110mm dia. |
| 34 | Vent Covel 110 mm dia |
| 35 | P & F 15 mm dia connection pipe of approved quality make PVC Pipes with nuts 450 mm. |
| 36 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant Plain floor trap 110 mm dia |
| 37 | Pipe clip 110 mm dia |
| 38 | P&F G.I. Pipes (External work) with G.I. Fittingexcluding union (IS:1239 Mark) & MS Clamps, including cutting and making good the wall and floors. Exposed on wall. 15mm dia. nominal bore.B Class |
| 39 | P&F G.I. Pipes (External work) with G.I. Fittingexcluding union (IS:1239 Mark) & MS Clamps, including cutting and making good the wall and floors. Exposed on wall.25mm dia. nominal bore.B Class |
| 40 | P&F Ball cock (IS:1703 Mark) with Road & PVC Ball complete weight 1000gm 25mm. |
| 41 | P & F Looking Mirrors with P.V.C. frame of approvedSize 500 x 400 mm |
| 42 | P&F Full way valve (IS:778 Mark) or wheel valve of approved make. Gun metal 25 mm nominal bore. |
| 43 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplearthwitalead of 50 mtr:-Size 400x140x150 cms (for 50 users) |
| 44 | P & F PVC Storage tank (IS 12701 marked indicating the BIS licence No.) of approved make with cover, 25mm dia 1M long G.I. Over flow pipe and 25 cm long wash out pipe with plug & socket including making connection etc complete of approved design. 500 liters capacit y |
| 45 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth |
| 46 | Construction of chambers in all type of soil with 300 mm thick masonary in cement sand mortar 1:6, 10 cm thick CC 1:5:10 in foundation, 20 mm thick insider plaster in CM 1:6 finished with floating neat cement ,50 mm thick M-15 grade CC flooring , Earth work etc. complete as per design including disposal of surplus earth within a lead of 50 Mtr. Inside size 450x450 mm depth upyo 0.50 m cement cover with frame |
| 47 | PART-C (Electric Work) Based on BSR PWD 2022, Jaipur Circle |
| 48 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it\"sISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 49 | Short point (up to 3 mtr.) |
| 50 | Medium point (up to 6 mtr) |
| 51 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it\"s ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheet\"s & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure \"A\" attached with this BSROn board |
| 52 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR |
| 53 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 54 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy = 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.=0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 570mm (+/-10%) batten with min. lumen output 1000 lm |
| 55 | Providing & Fixing ofISI marked (IS:371) 6 amp surface type 3 pin ceiling rose with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screws including making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 56 | Providing & Fixing of ISI marked (IS:1258) batten/angle lampholder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal & captive screwsincluding making connection testing etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 57 | Providing & Laying P.V.C. / XLPE insulated & P.V.C.sheathed Un-armoured / Armoured aluminium cable 1.1 KV grade as per PWD specification for electricalWorks in existing RCC / Hume / Stoneware /PVCpipe/openduct/cable trench with filling of excavatedearth in trench , on existing cable trays or onsurfaceetc. including making necessary connection, testingetc. as required of size and as per points (a),(b), (c),mentioned below:-Un-armoured 6.0 Sq. mm 2 core |
| 58 | Providing & Fixing of 240/415 V isolatorISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage,true contact indication,Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm.IP 20 contact protection and fitted in existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR Double pole isolator 30 A / 40 A rating |
AI Tender Summary
Tender Timeline
Aug 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender