Construction Of Boys Toilet ( Secondary Ix - X ) In Gsss Nagal Sherpurblock Todabhim Dist. Karauli
Tender Value
2.98 Lakhs
Estimated cost
Bid Submission
23 Aug 2022
0 days left
EMD
5960
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
todabhim → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Boys Toilet ( Secondary Ix - X ) In Gsss Nagal Sherpurblock Todabhim Dist. Karauli
BOQ
| Sl. No. | Item Description |
| 1 | PART A CIVIL WORK |
| 2 | Earth Work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including taking out the excavated soil and depositing and refilling of Jhiri with watering& ramming and disposal of surplus excavated soil as directedwith ina lead of 50 meter. All kinds of soils. |
| 3 | Providing and laying inposition cement concrete including curring,compaction etc.complete in specified grade excluding the cost of centering and shuttering- All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Random Rubble stone masonry for foundation with hard stone in foundation and plinth in Cement Sand mortar above 30cm thick wall in. (Cement Mortar 1 : 6, 1 Cement : 6 Sand). |
| 5 | Providing and laying in position specified grade of Cement Concerete for RCC structural Elements in beams, suspended floors, roofs, griders having slope upto 15 degree landings, balconies, shelves, chajjas,lintels,bends plain window sills,staircasesupto three floors inclu. Curing, compaction, finishing with rendering in cement sand mortar 1:3 making good and joints exclu, Cost of centering, shuttering and reinforcement with M-20 grade nominal mix 1: 1.5 : 3 (1 cement 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) |
| 6 | Brick masonry with bricks of class designation 75 in CM 1:6 in Super Structure |
| 7 | Half Brik masonry in super structure, above plinth level up to floor V level using bricks of designation 75, C.M. 1:4 |
| 8 | Random Rubble dry stone kharanja under floor. |
| 9 | Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4, up to 15 cm thick. |
| 10 | Providing and fixing in cement sand mortar 1:4, single paitam (rebated) stone doors windows and ventilator frame of approved quarry. size 75x60mm |
| 11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. |
| 12 | Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 13 | P/F reinforcement for RCC work including straightening,cutting, bending, placing in position and binding (including cost of binding wire)all complete upto floor five leveTMT bars (Conforming of relevent IS Code). |
| 14 | Internal Plaster : Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 12mm thick |
| 15 | External Plaster : Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished 20 mm thick |
| 16 | Plaster(Ceiling): 6 mm thick cement plaster to ceiling of mix 1:3(1 cement: 3 fine sand) |
| 17 | Wire Gauge Supplying & fixing fixed wire Gauge to the Metal frame of rolled section by metal beading 20X3mm with suitable screw at not exceeding 150mm distance. 14 mesh X 24 Gauge |
| 18 | Guard Bars: Providing and fixing square bars or other flat welded to window/ventilators etc., Guard bar 10 x10mm |
| 19 | Providing and laying cement concrete including curing compaction etc. complete in retaining walls, return walls, walls including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window, sills, fillets, levelling course etc.up to floor level excluding the costof centering and shuttering. M-10 grade nominal mix. 1:3:6 |
| 20 | Providing & Fixing Ist quality standard White, gray, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 and IS: 15622 of size 300mmx200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and piller) |
| 21 | Providing and fixing MS sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats, including two coats of anti corrosive red oxide primer paint. 20% extra for double leaf shutter. ` |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture togive an even shade, two or more coats on new work. Quantity same as per Item No. 18=11.20 |
| 23 | Distempering with dry distemper of approved brand and shade (two or more coats) and of required shade on new work, over and including, priming coat of whiting to give an even shade including all scaffolding. |
| 24 | Exterior finishing :- Finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. New work (two or more coat applied @1.67/ ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm.) |
| 25 | PART BSANITARY WORK |
| 26 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 27 | P & F Indian type white glazed vitreous chila 1st quality W.C. orissa pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 530 x 410mm |
| 28 | P & F 1st quality WVC Urinal (IS : 2556 mark) with 25 mm dia G.I. waste pipe, dome waste coupling, concealed iron brakcets of screws etc. complete. Flat back (Small) size 440x265x315mm. |
| 29 | P & F WVC (IS : 2556 mark) squatting urinal of standard make complete. including cutting and making good the floor. Size 450x350mm |
| 30 | P & F WVC wash basin (1st quality, IS: 2556 mark) of approved make with C.I.brackets duly painted, 1 No. 15mm C.P. Pillar cock (IS : 8934 mark) & 32mm C.P.brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting & making good the wall. Size 450mm x 300mm. |
| 31 | P & F G.I. pipes (External work) with G.I. fittings excluding union (IS 1239) including trenching & refilling earth etc. and |
| 32 | 15mm dia nominal bore |
| 33 | 25mm dia nominal bore |
| 34 | P & F Flush Cock / Flush Valve 9758 Mark for WC of approved quality make. Brass / Cun metal Half turn Wt.1 Kg. of approved quality/ make 25mm nominal bore. |
| 35 | P&F Bib cock (IS:8931 Mark), superior quality of approved make. C.P. Brass bib cock 15mm nominal bore. |
| 36 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 37 | Providing and fixing 15mm dia connection pipe of approved quality/make. PVC Pipewith CP brass nuts up to length 450mm. C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
| 38 | P & F PVC Storage Tank ISI Makes (IS 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over flow pipe & 25 cm, long wash out pipe with plug & socket, including making connection etc, complete of approved design. 500 Litres capacity. |
| 39 | P & F Rigid PVC Pipe (IS 4985) Class II (4 Kg. cm2) approved quality make including jointing the pipe with solvent cement rubber ring and lubricant. 110mm dia |
| 40 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5110mm dia |
| 41 | Construction of soakage well in all type of soil with 300mm thick dry masonry, top and bottom 300mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40mm thick M-15 grade C.C. Flooring, earthwork complete asper approved drawing including disposal of earth within a lead of 50 mtr. Size 240cm. dia outside & 240cm depth. |
| 42 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.-do- size 450 x 450mm depth upto0.5 M Cement cover with frame |
| 43 | PART C ELECTRIC WORK |
| 44 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copperconductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulatedunsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit &it\"s ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick HotDipped Galvanized Modular Box with earth terminal, 10A Modularswitch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3way connector, screws, making connections, testing etc. as required.For specification of copper Conductor, Phenolic Laminated sheet\"s &Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 Foradditional technical parameters of product / work refer Annexure \"A\"attached with this BSR Light point & Fan Point Medium point (up to 6 mtr) |
| 45 | Supplying and drawing FR PVC insulated & unsheathed flexible copperconductor as per PWD specification for electrical Works with ISImarked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire shouldbe made from 99.90 % purity copper, class 5 stranding in acc. toIS:8130/IEC 60228 for lower watt loss , oxygen free for less chances ofoxidization, insulation PVC type A/C/D , flame retardant as per IS10810-53, better amperage rating as per IS:3961 part 5, in existingsurface or recessed PVC/ MS conduit/casing capping makingconnections with Copper Lugs of suitable size, Ferrules,testing etc. asrequired. OEM Must have its own in house NABL lab setup for alltesting facilities for wires. For additional technical parametersofproduct / work refer Annexure \"A\" attached with this BSR |
| 46 | 2 x 1.5 sq.mm |
| 47 | 2 x 2.5 sq.mm |
| 48 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10kA breaking capacity (B/ C/D tripping characteristic as per type ofload and site requirement) 4 KV impulse withstand voltage, ISImarked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3as per IEC, minimum phase termination capacity of 35sq.mm. ,conductor line load reversibility , IP 20 contact protection and fittedin existing distribution board/sheets, minimum electrical operation20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A &above rating including making connections, testing etc. as required.OEM shall have submit NABL / CPRI / ERDA accrediated lab typetest reports & All as per pre approved by Engineer in charge. Foradditional technical parameters of product / work refer Annexure\"A\" attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating |
| 49 | Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture madefrom Powder coated Extruded aluminium housing with in builtdriver, System lumenefficacy = 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuitprotection ,THD < 10% , P. F.=0.95, CRI >80 , life time of minimum 50000 Burning Hourswith , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K/6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more thanthe specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.).Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. OEMmust have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 &LM80) certificate / Report from OEM shall be submitted. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work , referAnnexure \"A\" attached with this BSR . 1170mm(+/-10%) LED batten with min. lumen output 2200 lm |
| 50 | Providing & Fixing of Heavy duty capacitor start, copper woindDouble ball bearing900/1400 RPM single phaseExhaustfan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 300 mm sweep (900/1400 RPM) |
| 51 | Supply and laying PVC Insulated and PVC Round Sheathed Multi Corecopper conductor (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade .Wire should be made from 99.90 % purity copper, stranding in acc. toIS:8130/IEC 60228 for lower watt loss , oxygen free for less chances ofoxidization, insulation PVC type A/C/D , flame retardant as per IS10810-53, better amperage rating as per IS:3961 part 5, in existingpipe / open trench / Cable tray / on surface including makingconnection etc. as required. For additional technical parameters ofproduct / work refer Annexure \"A\" attached with this BSR 2.5 sq.mm x 3 core |
AI Tender Summary
Tender Timeline
Aug 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender