Construction Of Theatre Block For Phc Trehgam Construction Of Theatre Block For Phc Trehgam
Tender Value
27.92 Lakhs
Estimated cost
Bid Submission
18 Aug 2022
0 days left
EMD
79000
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
trehgam → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Theatre Block For Phc Trehgam Construction Of Theatre Block For Phc Trehgam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Aug-2022 | CDR Amount | Other | 18-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 2 | Providing and laying of stone soling/boulders (Hand Packed) including ramming, dressing and watering all complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level with 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level with 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal) crushed. |
| 6 | Reinforced cement concrete work in beams suspended floors , roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases upto floor five level including curing but excluding the cost of centering , shuttering, finishing and rienforcement with 1:1.5:3 (1 cement : 1.5 coarse sand: 3 graded crushed stone aggregate 20 mm nominal size) |
| 7 | Fillling with available excavated good earth in layers not exceeding 20cm in thickness including ramming watering all complete |
| 8 | Second class sand/ boulder back fillling hand packed including ramming watering all complete |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structure above plinth up to floor 5th level in cement mortar 1:6 mix (1 Cement : 6 Fine Sand). |
| 13 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 14 | 12mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand). |
| 15 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 16 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 17 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded @ 42.50 kg/sqm |
| 18 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withnwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick with zinc coating not less than 275 gram/m2). |
| 19 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 20 | Providing and fixing plained eaves boarding. 2nd class kail wood 250x32 mm (nominal size ) |
| 21 | Wood work in soffit uisng budloo wood planks including cost of necessary fixtures and fixing. Over budloo wood jambs 2\"\"x1.5\"\" frame work at a spacing of 15\"\" and 30\"\" c/c using nails and screws the job also includes fixing in structural steel using stainless stell nails/ screws complete job |
| 22 | Providing and laying vitrified floor tiles (anti skid )in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 23 | Providing and applying anti microbial wall clading 2.5mm thick stain resistant, glossy finish of size2500 x 1220mm,Weight 3.5kg/m², Max Temp: 60°C, Fire rating: BS 476 Part 7 - Class1 BS 476 Part 6 - Class 0 (when fixed to a non-combustible substrate) of stanadardquality and make. all complete |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) second class kail wood. |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).second class kail wood. 35mm |
| 26 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 27 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 28 | Providing and fixing aluminium harware fittings Concealed locks |
| 29 | Providing and fixing aluminium harware fittings Tower bolt 150mmx10mm |
| 30 | Providing and fixing aluminium harware fittings Tower bolt 100mmx10mm |
| 31 | Providing and fixing aluminium harware fittingsHandle 125mm |
| 32 | Providing and fixing aluminium harware fittingsHandle100mm |
| 33 | Providing and fixing aluminium harware fittingsHooks |
| 34 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. a. PN-16 pipe , 20mm (External) |
| 35 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. b. PN-16 pipe , 25mm(External) |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge.a. PN-16 pipe , 32mm (Internal) |
| 37 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threadedPolypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge.b. PN-16 pipe , 40mm (Internal) |
| 38 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and antimicrobial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. c. PN-16 pipe , 75mm (Internal) |
| 39 | Providing and fixing of PVCWaste pipes of approved and standard manufacture prince brandfor soil waste and ventilationincl. Jointing of pipes with rubber washer and solutionb. 100mm dia |
| 40 | Providing and fixing of PVCWaste pipes of approved and standard manufacture prince brandfor soil waste and ventilationincl. Jointing of pipes with rubber washer and solutionb. 75mm dia |
| 41 | Providing and fixing of PVC fittings of standard quality (prince) complete100mm floor trap |
| 42 | Providing and fixingof C.P.brass angle value for basin mixer and gyser points etcof approved make conforming to IS 893115mm nominal bore. |
| 43 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 44 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittingrrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 45 | Providing and fixing of soap dish/tray of standard quality and make incl. screws |
| 46 | Providing and fixingof C.P.brasstambler holder of approved make incl. screws complete |
| 47 | Providing & Fixing C.P. wall mixer (Non Telphonic) of approved make including cutting and making good the walls wherever required. |
| 48 | Providng and fixing of bip cock of standard quality and make |
| 49 | Providing and fixing of water heater (Gyser) of 25ltrs capacity of approved qualityincl. all fittings complete. |
| 50 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 51 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. .like jaguar etc |
| 52 | Coarse aggregates for an average lead of 25 Kms |
| 53 | Fine aggregates sand for an avearage lead of 60 Kms |
| 54 | Bricks for an average lead of 135 kms |
AI Tender Summary
Tender Timeline
Aug 17, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 18, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender