|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, complete all as specified. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, complete all as specified. |
| 3 | Taking down shutter of any description not exc 1 Sqm each complete all as specified. |
| 4 | Taking down shutter of any description exc 1 Sqm and n. exc 2.0 sqmeach complete all as specified. |
| 5 | Taking down cement plaster/dado (terrazzo) on brick/concrete or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed by Engr in charge. |
| 6 | Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc all as spd. |
| 7 | Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing all as directed. |
| 8 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks andsteel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete,Fe-290 (Gde E-165), complete all as specified. |
| 9 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 10 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified. |
| 11 | Providing and fixing factory made PVC door frame of the size 100mm x 45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam PVC sheet of density 600kgs/cbm manufactured by an ISO-9000 certified company mitre,mitre cut at two corners and joined with 4 nos .of 150mm long brackets of 15mm x15mm M.S. tube of 19 guage through out the frame .The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using anchor fasteners.A minimum of 4 nos .of screw to be provided for each vertical member & minimum 2 nos. for horizontal membersetc. complete as per manufactures specification and direction by Engr-in-charge. |
| 12 | S& F for 35mm thick, factory made, 2nd class hardwood, plain framed, panelled shutter (two panel)(single/Double leaf) with lock rail and panel of12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated completeall as spd |
| 13 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thickprelam PVC Sheet on back face, complete all as specified. |
| 14 | S&F for Factory made, 35mm thick, 2nd class harswood Glazed and skeleton shutters (single/Double leaf), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. complete all as specified. |
| 15 | M&L for 25mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work, fixed in repairs complete all as specified. |
| 16 | M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repairs, complete all as specified. |
| 17 | M & L for 2nd class hardwood plain fillets, square, rectangular or triangular in section clean sawn, secured with nails exc 13and n.exc 25 sqcm complete all as specified. |
| 18 | Supply and fixing Steel window with tubular frame factory made (with double shutter, one side wire gauge shutter and one side glazed shutter) of size 79 mm x 39 mm 16 gauze rectangular tubular frame with side hung shutters with glazing bars 12X3 mm flat iron including box/pintol type hinges with steel handles and steel peg stays complete dovetailed or welded complete andincluding 10 mm mild steel square bar @ 100mm spacing as grillcomplete all as specified. |
| 19 | Steel ventilator with tubular frame factory made of size 79mmx39mm 16 gauge rectangular tubular frame with top hung shutter in half portion and balance fixed to frame incl.T bolt to top hung shutter & peg stays incl 10 sqmm mild steel square bar as grill/guard bar @100mm spacing complete all as specified and directed. |
| 20 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 21 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified. |
| 22 | All as per item no 21 but fixing as in repair, complete all as specified. |
| 23 | S&F Aluminium alloy, anodised sliding door bolts 300mm long with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified. |
| 24 | S&F Aluminium alloy, anodised sliding door bolts 250mm long with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified. |
| 25 | All as per srl item No. 24 above but fixed in repairs, complete all as specified. |
| 26 | S&F Aluminium handle 100 mm long cast type anodised, complete all as specified. |
| 27 | S&F Aluminium handle 150 mm long cast type anodised, complete all as specified. |
| 28 | All as per srl item No.27 above but fixed in repairs, complete all as specified. |
| 29 | S&F Aluminium tower bolt 200 mm long, anodised barrel tower bolts of extruded section complete all as specified. |
| 30 | All as per srl item No.29 above but fixed in repairs, complete all as specified. |
| 31 | S&F Aluminium floor door stopper (150 mm long) of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified |
| 32 | All as per srl item No.32 above but fixed in repairs, complete all as specified. |
| 33 | S&F mildsteel 300mm ordinary rat tail helical door springincluding roller and roller plate complete all as specified |
| 34 | All as per srl item No. 33 above but fixed in repairs, complete all as specified. |
| 35 | S&F Butt hinges 100 mm medium weight cold rolled mild Steel complete all as specified. |
| 36 | S&F Butt hinges 100 mm medium weight cold rolled mild Steel fixed in repairs, complete all as specified. |
| 37 | S&F Butt hinges 50mm medium weight stainless steel complete all as specified and directed |
| 38 | S&F Butt hinges 100mm medium weight stainless steel complete all as specified and directed |
| 39 | S&F Sheet glass, ordinary quality 4.00 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd |
| 40 | All as per item no 39 but fixing as in repair,(in single/double/triple storey bldgs) complete all as specified. |
| 41 | S&F figured sheet glass , ordinary quality 4.00 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd |
| 42 | All as per item no 41 but fixing as in repair, (in single/double/Triple storey bldgs) complete all as specified. |
| 43 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40mm, complete all as specified. |
| 44 | Hasp and staple, 100mm size, safety type, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified. |
| 45 | Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified. |
| 46 | M&L of brick work withsub class\"B\" burnt bricks straight or curved on planexc. 6 m mean radius bult in CM 1:6 complete all as specified. |
| 47 | Rendering 15mm thick cement plaster in cement mortar 1:4 on on fair faces of brick work or concreteand mix with water proofing compound and finished even and smooth (without using extra cement) complete all as specified.(WPC shall be measured & paid separately) |
| 48 | M&L for 10 mm thick renderingon fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, complete all as specified. |
| 49 | M&L for PCC 1:2:4, type B-1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 50 | S&FforStainless steel drapery rod 25mm dia 1.6mm thickincl end caps and fixed to brackets fixed in repairs,complete all as specified. |
| 51 | M&L for preparation of new or previously untreated surface of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 52 | M&L for preparation of new or previously untreated surface ofsteel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 53 | M&L for two coats of cement based paints over a coat of primer incl preparation to newly plastered surfaces of walls etc completed all as spd |
| 54 | M&L incl preparation of newly plastered surfaces ofwalls and applying two coats ofdistemper oil emulsion over a coat of primer completed all as spd |
| 55 | Supply only liquid water proofing compound. |
| 56 | SCHEDULE \"A\" PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch \"A\" Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. |
| 57 | Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the PCDA(NC) Jammu area |
