Military Engineer Services-MES has published Repair To Flooring Roof Joinery And Cleaning And Repair Of Sewage Line Manholes Drain Path Etc At Amar Vihar At Anand Parbat Under Age Br Ii Under Ge North Delhi Cantt10. Submission Date for this Tender is 07-09-2022. Drainage Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Aug-2022 | Corrigendum | Other | 31-08-2022 |
| 2 | 31-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-09-2022 |
| Sl. No. | Item Description |
| 1 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grithcomplete all as specified and directed. |
| 2 | M&L for preparation of old decoreatedexternal wall surface by sand paper of required sizes , filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coats of weather proofing exterior acrylic emulsion paint complete all as specified anddirected . |
| 3 | S & F PVC Water tank top cover (Lid) 1000 ltr capacity fixing with screw complete all as specified and directed. |
| 4 | M/L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, cemplete all as directed and specified |
| 5 | Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed. |
| 6 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed. |
| 7 | M&L for 10 mm thick granite (of any type) work (table rubbed and polished) in walls, pillars and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete |
| 8 | S & FFibre glass reinforced transparent plain sheet 2 mm thick inany colour complete all as specified |
| 9 | S&F in repair glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge. |
| 10 | S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified. |
| 11 | S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with clamps etc including taking out/dismantling of old pipes complete all as specified. |
| 12 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor etc including taking out/dismantling of old pipes complete all as specified. |
| 13 | S&Fin repairPVC (SWR) bends any radius bore 75 mm with access door |
| 14 | S&Fin repairPVC (SWR) bends any radius bore 110 mm with access door |
| 15 | Demolition of brick/stone masonry built in CM. all as specified. |
| 16 | M&L brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified. |
| 17 | M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specifiedand as directed. |
| 18 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water , |
| 19 | M&L for ready mix plaster of 15mm thick on brick or conc surfaces in wall (External surfaces) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed(Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) |
| 20 | M/L for preparation of newly plastered surfaces of any description and applying two coats of weather proofing exterior acrylic emulsion paint over a coat of primer all as specified and directed. |
| 21 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) andall as directed. |
| 22 | Ditto as per itemabove but exc 1.5 sqm but n.exc 4sqm each |
| 23 | S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d)Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i)Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx "B" |
| 24 | S&F foraluminium anodised powder coated Deco grill (DG-104), 10mm widewith U shape snap beading complete all as specified and directed. |
| 25 | S & F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. Complete all as specified. |
| 26 | S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 27 | S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane completed all as specified and directed. |
| 28 | S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge. |
| 29 | S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling ofplain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheetbeading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified. |
| 30 | S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed. |
| 31 | S & F100mmmedium weight stainless steel butt hinges complete all as specified |
| 32 | S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified. |
| 33 | S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified. |
| 34 | Dismantling of floor, hearth or wall tiling with cement mortar bedding, backingand dispose rubbish out off the premises complete all as specified and directed. |
| 35 | M&Lnon skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. |
| 36 | M&LViterified ceramic tiles 10 mm thick square/rectangularlight shade texture polished,area of each tilesNot exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tileincluding 15mm thick cement mortar screed bed in CM (1:6) complete all as specified and directed. complete all as specified and directed. |
| 37 | All as per ser Item No-36 here -in-before but on vertical surface as in dados/ skirting over 10mm thick rendering as backing coat in CM 1:4 complete complete all as specified and directed. |
| 38 | M&Lglazed ceramic coloured tiles size 350x250x7mm/450x350x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 39 | S&F in repair SS decorative curtain rod 20mm dia ofincluding brackets, side knobs and fixed to wall complete all as specified and directed. |
| 40 | Complete removal of old roof treatment incudingcement mortar ( except mudfushka , brick tile ) andremoval of grass, small trees by picking sweeping , cleaning and washing down with water to remove dust etcincuding removing debries out side MOD land ,complete all as specified and directed. |
| 41 | M&L for 15 mm thick cement plasterover the concrete / brick roof surfacesin cement mortar 1:4mixed with liquid water proofing compound@ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately. |
| 42 | M & L for applying apriming coat of@ 0.30 Kg / Sqm with Bituminous primer for use in water proofing treatment including prepration of surface , complete all as specified and directed . |
| 43 | M & L for applyingevenly a tack coat of industrial hot blown grade bituminen 85/25 @ 1.2 Kg/Sqm including cleaning surfaces over |
| 44 | M & Lfor water proofing treatment of roof with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) shall be laid with 100mm side lap/end lap on primed surfaces as per manufacturers instruction , complete all as specified and directed. |
| 45 | M& L for applying a coat of heat solar reflective resisting paint ( aluminium bitumen paint)@ 0.15 Ltr/Sqm over APPsurface, complete all as specified and directed . |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 47 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed |
| 48 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified. |
| 50 | S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 51 | S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 52 | Dismantling boarding,any description, fixed in any position with nails. |
| 53 | M & L for 18mm thick PVC Sheet consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesiveand self tapping screws all as specified and directed. |
| 54 | M & L for 6mm thickPVC Sheet consisting of carcass one side decorative lamination and other side balancing white sheet consisting of carcassfixed with approved adhesiveand self tapping screws all as specified and directed. |
| 55 | S & F for20mm wide & 1mm thick PVC EDGE BENDING pasted to Edges of PVC Furniture with suitable adhesive complete all as specified and directed. |
| 56 | S&F soft close heavy duty steel nickel plated telescopic drawer channel size 500mm ( width required 12.8 mm available channel hight 45 mm)includingfixing arrangement to drawer/ baskets etc complete all as specified and directed. |
| 57 | S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed . |
| 58 | S&Fperforated cutlary size (21x20x6)Cut (P)(475x485x350) mm stainless steel of grade 304 complete all as specified and as directed. |
| 59 | S&FThree tier trolley bottle pull out (21x20x6) Bottleof size 485x530x150mm of stainless steel of grade 304 complete all as specified and directed. |
| 60 | S&Fplate basket of size (21x20x6) Plate (470x535x200)mm stainless steel of grade 304 complete all as specified and directed. |
| 61 | S&FMP basket of size (21x20x6) Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. |
| 62 | S&FC&S Basket of size(21x20x6) Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. |
| 63 | S&FVEG Basketof size(21x20x6) Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. |
| 64 | S&FThal Basketof size(21x20x6)Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. |
| 65 | S&FGrain Basketof size ( 21x20x6) Cut (P)(475x485x350)mm stainless steel of grade 304 complete all as specified and as directed. |
| 66 | S& F Soft close heavy dutySlow motion hinge steel nickel plated, 4 holes mounting plate, half overlayadjustment height/ depth fixedin repair completeall as specified and directed. |
| 67 | S&F in repair Stainleless steel handle 75mmfancy type for cub board shutter complete all as specified and directed. |
| 68 | Cleaning ofEWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC pipes all types top to bottom including junctions etc,cleaning of sewage line upto GTcomplete all as specifiedand as directed. |
| 69 | Cleaning of manhole up to 1.00 meter depthany size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhifor dumpingorout side Defence land complete all as specifiedand as directed. |
| 70 | Cleaning of manhole depth exc1.00 meter and n exc 2.00 meter of any size of manhole and taking out sludge and depositing the same in notified area by Municipal Corp of Delhifor dumpingorout side Defence land complete all as specifiedand as directed. |
| 71 | Cleaning of sewage line from GT to Ist manholecomplete all as specifiedand as directed. Note:-Cleaning of sewage line of daimeter upto 100mm to 150mm |
| 72 | Cleaning of sewage line 100 mm dia from manhole to man hole by manual/ mechanicalrooding removing all sludge/waste aqnd making the line functional incl depositing of all waste etc out side MOD land complete all as specifiedand as directed. |
| 73 | Cleaning of sewage line 150 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specifiedand as directed. |
| 74 | Cleaning of sewage line 200 mm dia from man hole to man hole by manual/ mechanical roding, removing all sludge/waste and making the line functional incl depositing of all waste etc out side MOD land complete all as specifiedand as directed. |
| 75 | Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and burried off the same out side the defence area notified by Municipal Corporation of Delhi all as specifiedand as directed by Engr-in-Charge. |
| 76 | Cleaning of sewage line, man holes exc 1.25 m depth and septic tank etc using mechanically oprated Hydraulic pressure machine equpied with jet and suction pressure cleaning all as specified and directed.(08 working hours for one job). Note work will be executed in foul condition |
| 77 | S & F in repairfor precast fibre reinforced cement concreteManhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mmx500mmx 80mmcomplete all as specifiedand as directed. |
| 78 | S & F in repairprecast fibre reinforced cement concreteManhole cover(Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specifiedand as directed. |
| 79 | S & F in repairprecast fibre reinforced cement concreteManhole cover(Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 600mm dia x80mm thick complete all as specifiedand as directed. |
| 80 | Excavation in any type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting outcomplete all as specifiedand as directed. |
| 81 | Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specifiedand as directed. |
| 82 | Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specifiedand as directed. |
| 83 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia SGSW / RCCpipes after they are laid and tested including demolition of old bed and pipes omplete all as specifiedand as directed. (thickness of concrete bed 100mm). |
| 84 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 200mm internal dia SGSW / RCCpipes after they are laid and tested including demolition of old bed and pipes omplete all as specifiedand as directed. (thickness of concrete bed 100mm). |
| 85 | Supply and laying, jointing150mm internal dia of salt glazed stoneware pipes grade "A"incl testing and laid in trenches to a level on concrete bed complete all as specified. |
| 86 | All as per item No.85 here-in-before but200mm internal dia of salt glazed stoneware pipes grade "A" . |
| 87 | Cutting into existing manholes for connecting new drains making good to pipe and rendering,cutting out existing benchingfor and forming branch channel (1/2 or 3/4section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150 dia pipes omplete all as specifiedand as directed. |
| 88 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for all as specified. |
| 89 | Demolition of cement concrete in ground floor (unreinforced) and pavingsincluding tiles etc ,n exc 15cm thickness (below or above ground level) complet all as specified. |
| 90 | M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified |
| 91 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified |
| 92 | M & L machine precast colour concrete decorative interlocking paver blockof a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified. |
| 93 | M & Lsand filling under floors including watering and consolidation. |
| 94 | M&L in repair for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.Make: Coral, A-1, Hindustan. |
| 95 | M & L adequate coat of Painting lines, dashes, arrows, letters, etc. on roads pavements and the like exc 10cm wide with road marking paint, white or golden yellow |
| 96 | S & F in repair vitreous china wash hand basinwhite flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia,brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified. |
| 97 | Scheduleof Credit - Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 81,400.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
