Construction Of Office Building Work -Nagar Palika Parishad, Palia Kalan Kheri Office Bhavan Nirman Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Aug 2022
0 days left
EMD
79963
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
palia → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Building Work -Nagar Palika Parishad, Palia Kalan Kheri Office Bhavan Nirman Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in ordinary soil i/c lift 1.5 M and lead up to 30 M as per DAR 281 |
| 2 | Local sand filling complete of work |
| 3 | Providing & Laying cement concrete 1:5:10 (1 cement 5 sand 10 graded stone agregate 40 mm nominal size) and curing complete i/c cost of farm work in foundation & floors as per DAR 4.1.10 |
| 4 | Class- 150 Brick work in 1:6 cement, C sand mortar in foundation & plinth, supply of all material, labor T&P etc required for proper com of work as per DAR 6.1.1 in Foundation |
| 5 | Provind and laying R.C.C. cement concrete with 1:1.5:3 cement C.sand and stone grit including supply of all materials labour T&P etc required for proper completion of work. DAR 5.3 of beam |
| 6 | Provind and laying R.C.C. cement concrete with 1:1.5:3 cement C.sand and stone grit including supply of all materials labour T&P etc required for proper completion of work.DAR 5.3 for slab |
| 7 | Provind and laying R.C.C. cement concrete with 1:1.5:3 cement C.sand and stone grit including supply of all materials labour T&P etc required for proper completion of work.(as per DAR 5.2.2 for column |
| 8 | M.S. or iron work. As per S.I. No. (13b+DAR 5.22.6) |
| 9 | Class- 150 Brick work in 1:4 cement, C sand mortar in foundation & plinth, supply of all material, labor T&P etc required for proper com of work as per DAR 6.4.1 |
| 10 | 12mm thick plaster with 1:4 cement & C. sand mortar i/c all material labor T&P etc. (as per DAR 13.4.1) internal |
| 11 | 12mm thick plaster with 1:4 cement & C. sand mortar i/c all material labor T&P etc. (as per DAR 13.4.2) Outer |
| 12 | 12mm thick plaster with 1:4 cement & C. sand mortar i/c all material labor T&P etc. (as per DAR 13.16.1) Ceiling |
| 13 | Putty work with all complete as per DSR 13.80 |
| 14 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished masine cut for kitchen plateforms vanity counters, windows sills, facias and similer locations for required size, aproved shade color and texture laid over 20mm thick base cement moter 1:4 cement and course sand, GRANITE OF ANY COLOUR AND SHADE AREA OF SLAB OVER 0.50 SQM DAR 8.2.2.1 |
| 15 | Finishing wall with premium acrylic smooth exterior paint with silicone additive of required shade as per DSR 13.47.1 two or more coat on new work including prime coat |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. al top, bollom and sides with required EPDM rubber! neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling. C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge (Glazing, paneling and dach factoners to be paid for separately): Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) DSR 21.1.1.3 |
| 17 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and foxing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). DSR21.17 |
| 18 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) DSR 21.1.2.3 |
| 19 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc, with EPDM rubber/neoprene gacket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) DSR 21.3.3 |
| 20 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness DSR 21.4.2 |
| 21 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. DSR 21.18 |
| 22 | fixing of door window chaukhat |
| 23 | Aluminium sliding bolt |
| 24 | Aluminium tower bolt |
| 25 | Aluminium handle |
| 26 | Aluminium butt hinges |
| 27 | WC pan orrisa type DAR 17.1.1 |
| 28 | Providing and fixing flat back or angular front liper urinal basin of white glaged earthen ware 465x355x265 mm etc all complete DAR 17.5.1 |
| 29 | Providing and fixinf white vitrious china wash basin etc all complete DAR 17.7.1 |
| 30 | Add 12% GST |
AI Tender Summary
Tender Timeline
Aug 11, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender