Addn/Alteration Of Bldg No P-9 And P-37 And Provn Of Basic Amenities At Af Stn Wadsar
Tender Value
24.90 Lakhs
Estimated cost
Bid Submission
30 Aug 2022
0 days left
EMD
49800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
wadsar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addn/Alteration Of Bldg No P-9 And P-37 And Provn Of Basic Amenities At Af Stn Wadsar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Aug-2022 | Change in NIT | Other | 23-Aug-2022 |
| 2 | 23-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing unserviceablewater proofing treatment from top of roof and canopies/chajjas of building including removal of debris out side MD land complete all as specified and directed. |
| 2 | Demolition of cementconcrete (un-reinforced) of any description (including plastering,leeping etc) in any position not otherwise specifically provided for n.exc 15 cm thick complete all as specified and directed. |
| 3 | M&L forPCC (1:2:4) type B-1(using 20 mm graded crushed stone aggregate)as in padding of 40 mm average thickness andin adequate slope on roof surface and finishing the top even & green and smooth complete all as specified and directed. |
| 4 | M&L forrendering10mm thick in CM 1:4,mixed with WPC @3% by weight of cementon fair faces of concrete surfaces without using extra cementas in roof complete all as specified and directed.Note:- WPC shall be measured & paid separately. |
| 5 | M&L for preparing clean and dried plastered surface and applying a coat of oil basedbitumen primer conforming to IS 3384-1986 @ 0.30 litrs/sqmand then laying APP polymer modified membrane,3mm thick with non woven polyster reinforced membrane (3.50 kg/sqm) having thermal insulation with white mineral gravel finish on upper side of membrane and laid by torch application method to the entire surface complete all as specified and directed by Engineer in Charge. |
| 6 | Supply only Integral waterproofing compound |
| 7 | M&L 100 mm thick PCCtype D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor finishes complete all as specified and directed. |
| 8 | M&L forMachine pressed precast conctete interlocking glossy/ lacquer finish paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thicknessincluding 2mm thickrubber mould glossy/ lacquer finish paver block of GradeM-40 and over 25 mm thick sand cushion complete all as specified and directed.( Note- Sand will be measured and paid separately) |
| 9 | M&L for sand filling/sand cushioning of interlocking tilesunder floors or in foundations of any description of work including watering and consolidation complete all as specified. |
| 10 | M&L forprecast cement concrete 1:2:4 type B-0 (using 12.5mm and below stone aggregate ) in kerb stone factory made as approved by GE with plaine fair faces including champhering, weathering etc complete with joint to match in CM 1:6 complete all as specified and directed. |
| 11 | M&L for 75 mm thick PCC 1:4:8 (40 mm graded stone aggregate ) type D-2 as in flooring,hard standing and sub base finished even and fair surface complete all as specified and directed. |
| 12 | M&L for laying 75 mm PCC (1:2:4) B2 using 40mm graded stone aggregate as in flooring / HS /pavings including glass dividing strips, complete all as specified and directed.(Note- Glass dividing strips will be measured and paid separately) |
| 13 | Supply only Glass dividing strips, 3 mm thick for 38mm width fixed to floor ever 2.5 mtr pael etc completeall as specified and directed |
| 14 | Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof slab/RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion andall loose scales, rust etc from the visible reinforcement and cleaning the steelreinforecement properly providing NIT zink primer of FOSROC or equivalent. Zink primer of CHEMISTIC/WEBAC on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc all as specified including providing necessary scaffolding complete all as specified and directed. |
| 15 | M&L for applying bonding coat of modified styrene butadene emulsion (SBR bonding agent i.e nitobond SBR 45 or equivalent as approved) in proportion 1 Part (nitobond SBR 45:1 part (water) :3 part (OP cement) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete / screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc complete all as specified and as directed. |
| 16 | M&Lfor applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR (Nitobond SBR 45 of FOSROC or equivalent of PIDILITE/ R or M InternationalMumbai/ 21 SHM mumbai) in proportion 1 part (cement):3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and directed. |
| 17 | Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint , haking for key scrubing with water etc complete all as specified and directed |
| 18 | M&L for rendering 15 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed |
| 19 | All as per item No 18 here in before but 10 mm thick CM 1:6 and setting coat 5mm thick CM 1:4 mixed with WPC in external surface of wall including scaffolding complete all as specified and directed . Note:- WPC measured and paid in revalent item of this schedule. |
| 20 | All as per item No 18 here in before but 5 mm thick in ceiling surfaces CM 1:4 complete all as specified and directed. |
| 21 | M&L for preparation ofnew plastered surface of wall and applying two coats of distemper oil emulsion over a coat of primer over a sufficent coat of Birla wall putty complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 24 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6.complete all as specified and directed. |
| 26 | M&L for vitrified ceranic dark coloured 10 mm thick (square/Rectangular) polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 27 | M&L for Non- skid Ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 28 | M&L glazed ceramic coloured digitaltiles 450x300mm x 7mm thick invertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4 complete all as specified and directed. |
| 29 | Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed. |
| 30 | All as per item No 29 here in before but 20 mm dia complete all as specified and directed. |
| 31 | S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling orlaid in floors complete all as specified and directed. |
| 32 | All as per item No 31 here in before but 20 mm dia. |
| 33 | S&F in repair Fancy type CP Long shunk bib taps 15 mm dia ,chromium plated cast copper alloy withhalf turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 34 | S&F in repair Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure withhalf turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 35 | S&F in repairFancy type CP stop valve 15mm dia cast copper alloy, chromium plated fency type with long shank and cup (concealed type)screwed down high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed complete all as specified and directed. |
| 36 | S&F 32mm CP Brass bottle traps for wash basins with inlet and outlet screwed for pipe or connection including necessary packing, union and cap and fixed complete all as specified and directed. |
| 37 | S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed. |
| 38 | S&F in repairs Vitreous china wash basin with pedestalflat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand cement complete all as specified and directed. |
| 39 | S&F SS shop dish of size 100mm complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F PVC cabinet with mirror of size 450mmx600mm complete all as specified and directed. |
| 41 | Supply and fixing PVC valveless, syphonicaction type flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handleincluding bracket, complete all as specified and directed. |
| 42 | Supply and fix in repairchromium plated Tubular towel rail, 20mm dia, D type, 60cm long including bracket/flanges complete all as specified and directed. |
| 43 | S&F PVC water connection 600 mm long to wash basin of 15mm dia including PTMT nuts and washers complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F in repairs One piece vitreous china wash down coloured EWCwith Cistern size 65x39x71 CM including with trap front or back inlet including custom made seat coverof any pattern and health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tubeand ABS wall hook complete all as specified and directed. Make : Hindware model deimos CAT No - 92044 or equivalent make as approved by GE. |
| 45 | S&F 5.00 mm thick 600 x450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 46 | S&F Vitreous China Bowl Urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 47 | S&F Stainless steel grating with or without hole of size 150 mm complete all as specified and directed. |
| 48 | S&F in repair PVC waste pipe of 32mm dia complete all as specified and directed. |
| 49 | Dismantling of ceiling board with fittings and any description including cover fillets complete all as specified and directed. |
| 50 | M&L for provission of false ceiling at hieght of 600x600x15 mm mineral fibre ceiling tiles RH-99 of type micro looks edge laid on super fine XL 15mm expose d grid systems with 15mm wide T- section flanges. The frame work comprises of main runner of size 15x32x3000 mm spaced at 1200 mm centre securing fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers (GI wire of 4.0mm dia) to be fixed by approved roof plug, level adjusters and screws etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall flush fitting 1200mm long cross tees of size 15x26x1200 mm to be interloched between main runners at 600mm centers to form a 1200mm x 600 mm module. Cut cross tees longer than that 600mm to be supported independently. 600 mm x 600 mm modules to be formed by fitting 600mm long flush fitting cross tees of size 15x26x600 mm centrally between the 1200mm crosstees perimeter wall angle of size 19x19x3000 mm secured to wall at 450mm maximum centres. Finally RH-99 mineral fibre tile 15mm thick micro look edge has to be laid on the 600mm x 600mm module complete all as specified and directed. |
| 51 | Taking down chowkhats or frames with shutters( with out taking off shutters from the frame) n.exc 1.5 sqmeach complete all as specified and directed. |
| 52 | S&F for solidPVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed. |
| 53 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face as per specification and drawing complete all as specified and directed. |
| 54 | S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete all as specified and directed. |
| 55 | S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 56 | S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed. |
| 57 | S&F for 150mm long aluminium handle cast type anodized complete all as specified and directed. |
| 58 | Dismantling water tanks and exc. 250 but n. exc. 500 litre capacity complete all as specified and directed. |
| 59 | S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 60 | S&F in repair 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 61 | Demolition of brick work of any description and in any position , built in cement mortar complete all as specified and directed. |
| 62 | M&L old size Brickwork with fly ash, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 63 | M&L for Half brick work with flyash bricks, straight or curved on plan to any radius built in half brick thick wallsCM 1:4 complete all as specified and directed. |
| 64 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall, fixed with self tapping screws complete all as specified and directed. |
| 65 | Dismantling water storage tanks of capacity upto 5000 ltrs removing to store or for taking credit complete all as specified and directed. |
| 66 | S&F rotational moulded water storage tank 5000 ltr capacity double layer (cylindrical /vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 67 | Taking up and down 25 mm bore steel tubing and connections, and removing materials for taking creditcomplete all as specified and directed. |
| 68 | Supply and Fix 25 mm Galvanised Steel water tubing(ISI Marked ) medium grade with and including all tube fittings and fixtures such as GI bends teeunion etc in trenches/fixed to wall/ fixed on pillercomplete and connecting to water supply pipe line and testing complete all as specified and directed. |
| 69 | S&F 25 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 70 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings;Flat Ironwelded framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 71 | M&L preparation of new surface and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth complete all as specified and directed. |
| 72 | M & L for Cutting holes in brick walls exc half brick but not exc one brick in built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 including white wash to match the shade/color or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 73 | S&F 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 74 | S&F 125mm long heavy weight cold rolled mild steel hinges and fixed to frame with scrwewd or welding complete all as specified and directed. |
| 75 | S&F 150mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 76 | S&F for glass corner shelf 12 x 12 inch wall mount with 5mm thickness with SS raillingcomplete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F PVC kitchen cabinets made withdoor frame of size 48x40mm (Section codeRUPS-414) , shutter frame45x300 (section code DWUF-501) and20mm thick shutter (section code SPUF-128 or SPUF-129) and including 75mm size Stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge. |
| 78 | S&F CP decorative type SS handles 75mm long fixed to PVC sheet or frame all as directed by Engineer-in- Charge. |
| 79 | S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and directed. |
| 80 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 81 | PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 82 | S & F Bib taps, cast copper alloyof 15 mm bore diawith crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 83 | S&F exhaust fans of metal body AC single phase 230/ 240 V of size 300 mm sweep with louver shutter metal body including making hole suitable for fixing exhaust fan including plastering finising and making good the existing surface complete all as specified and directed. |
| 84 | S&F stop valve, cast copper alloyof 15 mm bore dia with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and directed. |
| 85 | M & L for Chemical earthing complete with copper earth plate of 90 x 60 cm x 5 mm buried directly in ground (Earth pit not less than 4.0 meter below the ground level with top edge of the earth plate at a depth not less than 3.25 meter below ground level connected to and including copper earth strip32 x 6 mm x 7.5 meter long & connected to test point terminal block by means of copper nuts,bolts,check nuts & washer etc all as specified and directed. Note:- The rate quoted shall deemedto be inclusive of the following.(a) Excavation & earth work(filling in ,ramming in layers, watering etc as directed in any type of soil for earth pit of size 1.23 meter x 1.2 meter x 4.0 meter deep.(b) 20 mm bore mild steel galvanized iron tubing light grade for watering purpose complete including connecting with nearby water point.(c) 63 mm bore mild steel galvanized iron tubing light grade 2.85 meter long for strip protection(d) Common salt and charcoal dust in alternative layers of 15 cm up to 90 cm above the top of copper plate & one layers of 15 cm magnesium sulphate (Mg So4),Appx Qty of (Salt - 500Kg, Charcoal - 1000 Kg & MgSo4 - 150 Kg).(e) Earth chamber built in cement mortar 1:3:6 type C1(using 20 mm graded stone aggregate of size 600 mm x 600 mm 600 mm (overall internal) comprising 15 cm thick PCC bed extended 10 cm beyond outer face of wall and 15 cm thickwall,50 mm thick PCC bed extended 10cm beyond outer face of wall,50 mm thick RCC Chamber cover slab in RCC 1:2:4,type B1 reinforced with XPM(weight not less than 4 Kg/Sqm) having MS angle frame of size 50 x 50x 3 mm with lifting arrangement.MS frame painted with anti corrosive bituminous paint & overall chamber cover painted with two coat green cement based paint including marking thechamber as earth pit with writing of inspection test date & earth result with black & white paint complete all as specified and directed by Engineer In Charge. |
| 86 | Supply,installation(by carefully lowering in position) commissioning and testing of multistage submersible pumping set10 Stage pump set with electric motor 3 phase 440 volts 50 HZ frequency of40 HP/30 KW,delivery 100 mm dia suitable for borewell 200 mm (8\"\") dia complete all as specified and directed. |
| 87 | S&F in repair flat 3 core copper conductor PVC insulated and PVC sheathed cable 1100 volts grade of size 16 Sqmm all as required at site and complete all as specified and directed by Engr in charge. |
AI Tender Summary
Tender Timeline
Aug 23, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 23, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 30, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender