Bt Patch Repair Work From Km.224.200 To 225.00 (Bodla Town) 230.100 To 232.300 (Pondi Town) And Km. 242.300 To 246.820 (Police Line To Gurunalla) Of Nh 30 (Old Nh 12A), Bodla-Chhattisgarh
TDR : 33485327
Tender Notice
BOQ
Expired
Bodla
Chhattisgarh
Bt Patch Repair Work From Km.224.200 To 225.00 (Bodla Town) 230.100 To 232.300 (Pondi Town) And Km. 242.300 To 246.820 (Police Line To Gurunalla) Of Nh 30 (Old Nh 12A)
Name of Work :B.T. PATCH REPAIR WORK IN KM. 224.200 TO 225.000 (BODLA TOWN)230.100 To 232.300 (PONDI TOWN) 242.300 TO 246.820 (POLICE LINE TO GURUNALAH)
Sl. No.
Item Description
1
Tack coat (Providin and applying tack coat with bitumen emulsion RS-1, grade confirming to IS: 8887 using emulsion pressure distributor on the prepared bitumminous surface cleaned with mechanical broom) as per clause 503 & 112.(i) on Bituminous surfaces @ 0.25 kg per sqm
2
Bituminous Macadam (Providing and laying bituminous macadam with 120- 200 TPH highercapacity Batch Type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-40, surface with paver finisher to the required grade, leveland alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction) as per clause 504 & 112.With sensor paver finisher(ii) for Grading-II (19 mm nominal maximum size, bitumen content minimum 3.40%)
3
Close Graded Premix Surfacing/Mixed Seal Surfacing (Mechanical means using HMP of 120 -200 TPH capacity . Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness using viscocity grade bitumen VG-40 to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller and finishing to required level and grade. ) as per clause 508 & 112.i) With mechanical paver finisherii) Type-B (13.2 mm to 0.09 mm size aggregates)
4
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
5
Providing & Fixing; Object Marker of size 30 cm equilateral Triangle made of 1.5 mm thick Aluminum sheet pasted with High intensity Grade Retro Reflective Sheeting duly treated with HLVA complete with post of angle size 50x50x5 mm of 0.75 m and fixing the same in M 15 concrete block of size 30x30x30cm including transportation etc. complete
6
Providing & Fixing Hazard Marker Type-2 Partial Retro Reflective Size 0.30 x 0.90M made of 16 gauge (1.6 mm) thick mild steel sheet Confirming to IS:2062 Painted with one cast of Zinc Chromate Stoving Primer and two coats of Black Stove Enamel (Oven Baked) paint with 10 cm bands of yellow Retro- Reflective Sheeting of Engineering Grade pasted a per IRC:79 including one MS angle Iron post of size 50x50x5 mm of 1.65 meter long duly painted with synthetic enameled paint block including bolts and fixing the same in M-15 concrete black of size 30x30x30cm, including transportation etc. Complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
