Retrofitting Of Water Supply Scheme At.Khandegaon Tq.Basmat Dist.Hingoli Iind Time
Tender Value
63.56 Lakhs
Estimated cost
Bid Submission
15 Aug 2022
0 days left
EMD
63600
Bank guarantee accepted
Document Fee
5600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basmat → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting Of Water Supply Scheme At.Khandegaon Tq.Basmat Dist.Hingoli Iind Time
BOQ
| Sl. No. | Item Description |
| 1 | Strengthening Well- Taking 115 MM Dia. Of Horizontal Bores in Well by DTH Machineon site etc. complete Horiontal Bore |
| 2 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, llabour fuel) ettc complete MJP CSR 2021-22 P. No. 36 I. No. 44 |
| 3 | OLD -Switch Room :- Item No. 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand gravel and soft murum including removing theexcavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering preparing the bed for foundation and excluding backfilling etc complete(MJP CSR2021-2022 P.No. 42I.No.1) |
| 4 | Providing dry trap/granite/quartzite/gneiss rubble stone soling in 15 to 20 CM layers including Hand packing and compactingetc. complete MJP DSR 2021-22 I. No. 18 P. No. 37 |
| 5 | Providing and laying in situ (1:2:4) (M-150) grade of CC of dry trap/granite/quartzite/gneiss metal foundation and bedding including dewatering form work compaction curing finishing etc. complete 0.00 to 1.50 M Below/above ground level MJP DSR 2021-22 I. No. 1b P. No. 41 |
| 6 | Providing asnd laying in stiu C C of dry trap/ granite /quartzite/gneiss metal for RCC work in foundation like raft grillage strip foundation and footing of RCC column sand strip foundation and footing of RCC coloumns and strip sanctionss including moramal dewatering formwork compaction finishing and curing etc. completeFor Reinforcement in RCC M-200 MJP CSR 2021-22 I. No. 2b P. No. 41 |
| 7 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by (By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) in R.C.C. M-200 all types of columns. 3) For Columns (M-200) (MJP.CSR.2021-22 P.No.3aI.No.41 |
| 8 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade Beams / Draces / Lintel2) For Beam (M-200) (MJP.CSR.2021-220 I.No.4a P.No. 42 |
| 9 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade all type of Chajjas/ Parapets/ cirtain walls /partion wall /pardies (MJP.CSR.2021-220 I.No.6a P.No. 43 |
| 10 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade all slab/landing /vertical walls /waste slab/steps for staircase(MJP.CSR.2021-220 I.No.5a P.No. 42 |
| 11 | providing and fixing position steel bar reinforcement of various dia. For RCC pipes, caps, footings foundation slabs beams caloumn cnopies staricase wewls , chajjas lintel , pardies, coping, fins, arches as epr detailed drawing ande design and schedules including cutting bending with wires or taking welding and supporting as required etc. compelete (inlcluding cost of binding wires TOR Steel MJP CSR 2021-22 I. No. 8b P. No.43 |
| 12 | Item No.10 :- Providing and IInd class B.B. Masonary with conventional brick in cm as below in foundation and plinth of inner wall/ external wall including normal dewatering striking joints on nuexposed faces, racking out joints on exposed faces and watering etc. complete. in C.M. (1:6)etc. complete. (PWD.C.S.R. 2021-2022PNo.246I.No.27.01) |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05) |
| 14 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. ( Item No. 39.02) |
| 15 | Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed drawing consistingpanelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. 39.07 |
| 16 | Providing and fixing Country cut teak wood window with double leaf half glazed and half panelled shutter with style 70 x 20 mm thick rails 95 x 20 mm thick and pannels 15mm thick with ventilator including wrought iron hold fast, stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete. 39.16 |
| 17 | Item No.14 :- Filling in plinth and floors / trecnhes withContractor murum for bedding in 15 cm to 20 cm layers including watering and compaction complete. ( Murum brought from out site MJP CSR2021-2022 P.No. 46I.No.17) |
| 18 | Providing 12 mm thick cement plaster in one coat in 1:3 cement motar withought neeru finish for concrete, brick or stone surface in all position including scalfolding and curing etc complete.(PWD. CSR 2021-2022 P. No.153I. No.32.05) |
| 19 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. ( Item No. 32.11) |
| 20 | Providing and laying cement concrete flooring 50 mm thick with1:2:4 M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. (33.14 |
| 21 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. ( Item No. 35.13) |
| 22 | Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. (Item No. 35.01) |
| 23 | Public Well -Switch Room :- Item No. 1 :- Excavation for foundation / pipe trenches in earth, soils of all types, sand gravel and soft murum including removing theexcavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering preparing the bed for foundation and excluding backfilling etc complete(MJP CSR2021-2022 P.No. 42I.No.1) |
| 24 | Providing dry trap/granite/quartzite/gneiss rubble stone soling in 15 to 20 CM layers including Hand packing and compactingetc. complete MJP DSR 2021-22 I. No. 18 P. No. 37 |
| 25 | Providing and laying in situ (1:2:4) (M-150) grade of CC of dry trap/granite/quartzite/gneiss metal foundation and bedding including dewatering form work compaction curing finishing etc. complete 0.00 to 1.50 M Below/above ground level MJP DSR 2021-22 I. No. 1b P. No. 41 |
| 26 | Providing asnd laying in stiu C C of dry trap/ granite /quartzite/gneiss metal for RCC work in foundation like raft grillage strip foundation and footing of RCC column sand strip foundation and footing of RCC coloumns and strip sanctionss including moramal dewatering formwork compaction finishing and curing etc. completeFor Reinforcement in RCC M-200 MJP CSR 2021-22 I. No. 2b P. No. 41 |
| 27 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by (By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) in R.C.C. M-200 all types of columns. 3) For Columns (M-200) (MJP.CSR.2021-22 P.No.3aI.No.41 |
| 28 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade Beams / Draces / Lintel2) For Beam (M-200) (MJP.CSR.2021-220 I.No.4a P.No. 42 |
| 29 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade all type of Chajjas/ Parapets/ cirtain walls /partion wall /pardies (MJP.CSR.2021-220 I.No.6a P.No. 43 |
| 30 | Providing and casting insitu Cement concrete of trap/ granite/quartzite /gneisss metal for RCC workasper detailed drawings and designs or as directed by(By weigh batching and mix design for M-250 and M-300 only. Use of L&T A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted Excluding M.S. or Tor reinforcement) inR.C.C. M-200 grade all slab/landing /vertical walls /waste slab/steps for staircase(MJP.CSR.2021-220 I.No.5a P.No. 42 |
| 31 | providing and fixing position steel bar reinforcement of various dia. For RCC pipes, caps, footings foundation slabs beams caloumn cnopies staricase wewls , chajjas lintel , pardies, coping, fins, arches as epr detailed drawing ande design and schedules including cutting bending with wires or taking welding and supporting as required etc. compelete (inlcluding cost of binding wires TOR Steel MJP CSR 2021-22 I. No. 8b P. No.43 |
| 32 | Item No.10 :- Providing and IInd class B.B. Masonary with conventional brick in cm as below in foundation and plinth of inner wall/ external wall including normal dewatering striking joints on nuexposed faces, racking out joints on exposed faces and watering etc. complete. in C.M. (1:6)etc. complete. (PWD.C.S.R. 2021-2022PNo.246I.No.27.01) |
| 33 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05) |
| 34 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. ( Item No. 39.02) |
| 35 | Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 mm thick as per detailed drawing consistingpanelled vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. 39.07 |
| 36 | Providing and fixing Country cut teak wood window with double leaf half glazed and half panelled shutter with style 70 x 20 mm thick rails 95 x 20 mm thick and pannels 15mm thick with ventilator including wrought iron hold fast, stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete. 39.16 |
| 37 | Item No.14 :- Filling in plinth and floors / trecnhes withContractor murum for bedding in 15 cm to 20 cm layers including watering and compaction complete. ( Murum brought from out site MJP CSR2021-2022 P.No. 46I.No.17) |
| 38 | Providing 12 mm thick cement plaster in one coat in 1:3 cement motar withought neeru finish for concrete, brick or stone surface in all position including scalfolding and curing etc complete.(PWD. CSR 2021-2022 P. No.153I. No.32.05) |
| 39 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. ( Item No. 32.11) |
| 40 | Providing and laying cement concrete flooring 50 mm thick with1:2:4 M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. (33.14 |
| 41 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. ( Item No. 35.13) |
| 42 | Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. (Item No. 35.01) |
| 43 | OLD -Pumpimg Machinary :- Submerssible Pumpset Providing, erecting and giving test of 150 MM diasubmersible pump setconforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 65mm width 10mm thick shall be provided with each pump. with non return Valve Submersible Pump 150mm dia ( with bronz implier upto 8 stages Pumping machinary well 05.00 BHP suitable forhead MJP Mech CSR 2021-22 P. No. 1-33 PM1-2-5) |
| 44 | Supplying and Errecting Commissioning and testing swell Box type panel board comprising upto 10 HP 1 No. Panel board comprising for well |
| 45 | Supplying and erecting flat flexible 3 core 4.0 sqM PVC shealthd submercible trip Copper Cable as per IS 694-1990 of 3 core 4.0 sqm for Well PWD Lec CSR 2021-22 I. No. CB12-5-8 P. No. 261 |
| 46 | Providing and erecting Pressure guage of various capacity ranges of 0 to 70m , 0 to 140m and 0 to 210m complete with syphon tube insulated cock suitable for 12 m Dia. G.I. pipe Pressure guage shall be installed as directed tapping on rising main of delevary side of pumpset shall be drilled and oressure guage installed in position . Meter scale may be either in kg/cm2 Tor in m of water or with both scale |
| 47 | Providing & Erecting ISI mark G.I. pipe of folling class and dia including all local and central taxes octroi inspection charges transport to stores ,etc. complete 50mm dia Medium on well 50MM Dia on well MJP CSR 2021-22 P. No. 86 I. No. 1b |
| 48 | Providing and erectingcast steel D/F Sluice valves with jointing to pipe work (including all hardware and packing) water works quality having non rising spindle with hand wheel and without by pass arragement , spindle of stainless steel as per requirement , excluding foundation /structural steel support For rating calss 300 (working pressure 52kg/cm2 and test pressure 78kg/cm2 ) sluicevalvesMJP CSR 2021-22 I. No. 2a-3 IP.No. 1 50MM dia. NRV |
| 49 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valvesMJP CSR 2021-22 I. No. 2a-3 IP.No. 1 80MM dia. NRV |
| 50 | Lowering, laying and jointing G.I. pipes nad specials of following class and dia. including conveyanance from store to site of work etc. complete as directed by Engineer Incharge50 MMMedium MJP CSR 2021-22 I.No. 2b P. No. |
| 51 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 50 MMMJP CSR 2021-22 I.No. 4a P. No. 214 |
| 52 | 100 mm dia.NRV |
| 53 | C.I. specials -Providing,supplying ISI std. CI flaged /S&S specials including all taxes (Central or Local) railway freight, insurance unloading from railway wagon loading into truck transport to departmental store site unloading stacking etc. complete MJPMJP CSR 2021-2022 P. No. 6a-1 P. No.63 |
| 54 | Providing and erecting 40mm dia. G.I. pipe 2.5m long with perforated cross holes 12mm dia. At 150 mm c/c buried and refilling with altimate layers of charcoal and salt nacessry lenth of double G.I. earth strip connected to the electrod with cadmimum plate G.I. nut bolt12mm dia. with butuminious compound and connected to the nearest switch gear with end socket as per duly tested by earth tester and recording the results , supplying and erecting 19mm dia. verticle G.I. pipe 1.5M long with funnel and mesh at the top is included in the scope of work bottomend of the watering pipe and top end of pipe type electrode should be connectedwith suitable G.I. reducer coupling and at top end necessary G.I. Disconnecting link clamp should be provided PWD DSR 2021-22 P. No. 183 EA 9-1-4 |
| 55 | Public Well - -Pumpimg Machinary :- Submerssible Pumpset Providing, erecting and giving test of 150 MM diasubmersible pump setconforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 65mm width 10mm thick shall be provided with each pump. with non return Valve Submersible Pump 150mm dia ( with bronz implier upto 8 stages Pumping machinary well 05.00 BHP suitable forhead MJP Mech CSR 2021-22 P. No. 1-33 PM1-2-5) |
| 56 | Supplying and Errecting Commissioning and testing swell Box type panel board comprising upto 10 HP 1 No. Panel board comprising for well |
| 57 | Supplying and erecting flat flexible 3 core 4.0 sqM PVC shealthd submercible trip Copper Cable as per IS 694-1990 of 3 core 4.0 sqm for Well PWD Lec CSR 2021-22 I. No. CB12-5-8 P. No. 261 |
| 58 | Providing and erecting Pressure guage of various capacity ranges of 0 to 70m , 0 to 140m and 0 to 210m complete with syphon tube insulated cock suitable for 12 m Dia. G.I. pipe Pressure guage shall be installed as directed tapping on rising main of delevary side of pumpset shall be drilled and oressure guage installed in position . Meter scale may be either in kg/cm2 Tor in m of water or with both scale |
| 59 | Providing & Erecting ISI mark G.I. pipe of folling class and dia including all local and central taxes octroi inspection charges transport to stores ,etc. complete 50mm dia Medium on well 50MM Dia on well MJP CSR 2021-22 P. No. 86 I. No. 1b |
| 60 | Providing and erectingcast steel D/F Sluice valves with jointing to pipe work (including all hardware and packing) water works quality having non rising spindle with hand wheel and without by pass arragement , spindle of stainless steel as per requirement , excluding foundation /structural steel support For rating calss 300 (working pressure 52kg/cm2 and test pressure 78kg/cm2 ) sluicevalvesMJP CSR 2021-22 I. No. 2a-3 IP.No. 1 50MM dia. NRV |
| 61 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valvesMJP CSR 2021-22 I. No. 2a-3 IP.No. 1 80MM dia. NRV |
| 62 | Lowering, laying and jointing G.I. pipes nad specials of following class and dia. including conveyanance from store to site of work etc. complete as directed by Engineer Incharge50 MMMedium MJP CSR 2021-22 I.No. 2b P. No. |
| 63 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) 50 MMMJP CSR 2021-22 I.No. 4a P. No. 214 |
| 64 | 100 mm dia.NRV |
| 65 | C.I. specials -Providing,supplying ISI std. CI flaged /S&S specials including all taxes (Central or Local) railway freight, insurance unloading from railway wagon loading into truck transport to departmental store site unloading stacking etc. complete MJPMJP CSR 2021-2022 P. No. 6a-1 P. No.63 |
| 66 | Providing and erecting 40mm dia. G.I. pipe 2.5m long with perforated cross holes 12mm dia. At 150 mm c/c buried and refilling with altimate layers of charcoal and salt nacessry lenth of double G.I. earth strip connected to the electrod with cadmimum plate G.I. nut bolt12mm dia. with butuminious compound and connected to the nearest switch gear with end socket as per duly tested by earth tester and recording the results , supplying and erecting 19mm dia. verticle G.I. pipe 1.5M long with funnel and mesh at the top is included in the scope of work bottomend of the watering pipe and top end of pipe type electrode should be connectedwith suitable G.I. reducer coupling and at top end necessary G.I. Disconnecting link clamp should be provided PWD DSR 2021-22 P. No. 183 EA 9-1-4 |
| 67 | Rising Main - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). MJP CSR 2021-22 P. No. 71 I. No. 1B 140 mm dia PVC pipe 6 kg/cm2 |
| 68 | Providing ISI mark G.I. pipe of following calss and dia.Including all lockal and central taxes octroi inspection charges transportation to store etc. complete 125MM MEDIUM CLASS MJP CSR 2021-22 I. No. 1b P. No. 83 |
| 69 | Providing and Fixing PVC / G.I. pipe specialssuitable for above and said pipes including cost of taxes fright charges ,octroi loading unloading conveying to departmental store etc. completeMJP CSR 2021-22 |
| 70 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. MJP CSR 21-22 P. No. 42 I. No. 1 Lift upto 0.00 to 1.50 M |
| 71 | Excavation for foundation / pipe trenches in hard murum W.B.M. roadincluding removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete MJP CSR 21-22 P. No.3 I. No. 42Lift upto 0.00 to 1.50 M |
| 72 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete MJP CSR 21-22 P. No. 34 I. No. 5 Lift upto 0.00 to 1.50 M |
| 73 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. MJP CSR 21-22 P. No. 40 I. No. 7 Lift upto 0.00 to 1.50 M |
| 74 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete MJP CSR 21-22 P. No. 45 I. No. 16 |
| 75 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint) working pressure 6 and 10kg/sqcm 110MM dia PVC 6kg/cm2 pipeMJP CSR 2021-22 P.No. 73 I. No. 1b |
| 76 | Lowering, laying and jointing G.I. pipes and specials of following class and diameter includingworks includinglabour giving satisfactory hydraulic test etc. complete either underground of in vertical position as directed by Engineer in Charge 100 MEDIUMPVC 6kg/cm2 pipeMJP CSR 2021-22 P.No. 86 I. No. 2a |
| 77 | Refilling the trenches with avaliable excavated stuff with soft materials first over pipe line and then Hard material in 15cm layers with all laeds and lifts licuding concsoldation surching etc. compete as per MJP CSR 2021-22 I. No. 15 P. No. 37 |
| 78 | Hydraulic Testing of PVC pipes line to specified pressure including cost of all material and labour and water for testing for specified length including cutting pacing end cap making arragement of filling safe water using reciprcating type pump which would be able to provide specicied test pressure guage and other necessary equipments labour operation charges etc. complete MJP DSR 021-22 I. No. 5aP.No. 81140mm dia.6kg/cm2 |
| 79 | Hydraulic Testing of G.I. pipes line to specified pressure including cost of all material and labour and water for testing for specified length upto1 KM using reciprocating type pump which would be able to provide specified test pressure guage and other necessary equipments labours , operartion charges tc. compelte MJP DSR 2021-22 I. 5-b P. No. 89 80MM G.I. Medium Class |
| 80 | Designing (aesthetically), and constructing R.C.C. elevated service reservoirs of following capacity with R.C.C. staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre tocentre for ESR having capacity upto 500 cum including excavation inall plaster with water proofing compound to the inside face of container including refilling disposing of the surplus stuff within a lead of 50 m. all labour & material charges including lowering, laying, erecting ,hoistingand jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing andfixingaccessories such as M.S. ladder, CI man hole frame and cover water level indicators, lightening conductor, GI pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level,M.S grill gate of 2 M height with locking arrangement of approved design, providing and applying three coats of Acrylic emulsion with silicom additives design the structure and giving satisfactory water tightness test as per I.S. code.The job to include painting the name of the scheme and other detail on the reservior as per the directions of Engineer In-charge. R.C.C. ELEVATED SERVICE RESERVOIRCap.24000 Ltrs Staging Height 12 MMJP CSR 2021-22 P. No. 214 I. No. 1-1 |
| 81 | Providng and Supplying ISI standard CI double flaged pipes including all taxes (central and local) railway freight insurance unloading from railway wagen loading into truck transport to stores/site unloading etc. Complete as directed by Enginer Incharge 100MM Dia CI/DF Pipe I MJP CSR 2021-22 P. No. 72 I. No. 9i |
| 82 | 80 MM dia. CID/F Pipe |
| 83 | Providing an supplying ISI standard CI flaged /S& S specials including all taxes (central and local) railway freight insurance unloading from railway wagen loading into truck transport to stores/site unloading etc. Complete as directed by Enginer Incharge MJP CSR 2021-22 P. No. 72 I. No.6 ai Specials |
| 84 | Providing double flaged sluice valve confirming forimng for IS 2906/14846 including worn gear arragements as per test pressure stainless steel spindle caps including all taxes transportation etc. complete as directed by Enginer Incharge MJP CSR 2021-22 No.6 ai P. no. 72 I. 100 MM dia sluice valve Specials |
| 85 | 80 MM dia sluice valve |
| 86 | Distribution System - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). WorkingPressure 4Kh/cm2 75MMMJP CSR 2021-22 P. No. 76 I. No. 1 |
| 87 | 90MM Dia PVC 4kg/m2 |
| 88 | 110MM Dia PVC 4kg/m2 |
| 89 | Providing double flange sluice valve for IS 14846 including worm gear arragements as per test pressure stainless steel spindlecaps including inspection charges transportation upto departmental store uploading stacking excluding GST leived by GOI & GOM in all respect etc. Sluice Valve PN-1.6 MJP CSR 2021-22 I. No. 2 P. No. 13265MM Dia. Sluice Valve |
| 90 | 80 MM dia. sluice valve |
| 91 | 110MM Dia PVC 4kg/m2 |
| 92 | Providing and supplying at work site of work PVC/GI special suitable for above said pipes including cost of taxes fright chagres Octroi loading unloading etc. MJP CSR 2021-22 |
| 93 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. MJP CSR 21-22 P. No. 42 I. No. 1 Lift upto 0.00 to 1.50 M |
| 94 | Excavation for foundation / pipe trenches in hard murum W.B.M. roadincluding removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete MJP CSR 21-22 P. No.3 I. No. 42Lift upto 0.00 to 1.50 M |
| 95 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete MJP CSR 21-22 P. No. 42 I. No. 5 Lift upto 0.00 to 1.50 M |
| 96 | Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. MJP CSR 21-22 P. No. 43 I. No. 7 Lift upto 0.00 to 1.50 M |
| 97 | Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete MJP CSR 21-22 P. No. 45 I. No. 16 |
| 98 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint) working pressure 6 and 10kg/sqcm 90MM dia PVC 4kg/cm2 pipeMJP CSR 2021-22 P.No. 80 I. No. 475 MM Dia. PVC 4kg/cm2 |
| 99 | 90MM Dia. 4 Kg/cm2 |
| 100 | 110MM Dia PVC 4kg/m2 |
| 101 | Refilling the trenches with available excavated stuff with soft materials first over pipe line and then hard materials 15 CM layers with all laeads and lifts including consoldation surcharging etc. compelteMJP CSR 2021-22 P.No. 45 I. No. 15 Lift of 0to 1.50 M |
| 102 | Lowering laying and jointing in position following CI/F reflux valves butterfly valves and sluice valve including cost of all labour jointing material including nut bolts andgiving satisfatory testing etc. complete rate of all class of valvesMJP CSR 2021-22 P. No. 135 I. No.4 65MM Dia. Sluice valve |
| 103 | 80MM Dia Sluice valve |
| 104 | 110MM Dia PVC 4kg/m2 |
| 105 | Providing and fixing CID/F Road Box including loading unloading and casting to site of work inclujding all necessary excavation in all types of strata and fixing in mudum packing etc. complete MJP CSR 2021-22 P. No. 223 I. No. 5100 X255 MM Road Box |
| 106 | Providing and constructing BB Masonary Valve Chamber with 15CM thick 1:2:4 porp. PC bedding excluding excavation BB Masonary in CM 1:5 prop precast RCC frame and cover etc. complete as directed by Engineer Incharge MJP CSR 2020-21 I. No. 1AP.No. 207 225 MM X 300 MM size |
| 107 | Hydraulic Testing of PVC pipes line to specified pressure including cost of all material and labour and water for testing for specified length including cutting pacing end cap making arragement of filling safe water using reciprcating type pump which would be able to provide specicied test pressure guage and other necessary equipments labour operation charges etc. complete MJP DSR 021-22 I. No. 5aP.No. 8075mm dia.4kg/cm2 |
| 108 | 90MM Dia. 4 Kg/cm2 |
| 109 | 110MM Dia PVC 4kg/m2 |
| 110 | Providing and laying in situ 1:2: (M-150) grade of trap/ganite/quartzite/gneis metal for foundation and bedding including dewatering formwork compaction and curing finishing etc. complete MJP CSR 2021-22 P. No. 49 I. No. 1b1:2:4 (M-150) grade |
| 111 | OLD -Solar Grid Unit :- Grid connected to Roof Top Solar Pawer Plant ( As per Central Govt. Bench Mark dt. 15/06/20187.5X0.79X1000X60 |
| 112 | Public Well -Solar Grid Unit :- Grid connected to Roof Top Solar Pawer Plant ( As per Central Govt. Bench Mark dt. 15/06/20187.5X0.79X1000X60 |
AI Tender Summary
Tender Timeline
Aug 10, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender