Construction Of Ht / Lt Line Work And New Power Connection Work-2 Carriage Offollowing Line Materials From Store Center Orai To Site With Of Work Including Measuring Weiging Loading Unloading At Both Ends And Proper Stacking At Safe Site. 3 Carriage Of St Pole11 Mtr Long From Orai Store Site. 4 Carriage Of Pcc Pole 8.5 Mtr Long From Orai Store Site. 5 Carriage Of Other Line Meterials Asacsr Rabbit / Weasel Conductor, Stay Set, Xavm, G.I Pin, Insulator, Disc Insulator With Fitting, Earth Wire, Stay Wire, G.I Wire, Top Chennel, Dropper Chennal, 11 Kv Tpmo, Fuse Set And Other Line Meterial As Per Estimate From Orai Stor To Je Site Store 6 Carriage Of 11Kv Xlpe Of Size 3X70 / 3X120 / 3X185 Sqmm 7 Carriage Of 11 / 0.4Kv 25 / 63 Kvat / F From Orai Store To Site Store 8 Carriage Of 100Kvat / F From Orai Store To Site Store 9 Carriage Of 250 / 400Kvat / F From Orai Store To Site Store 10 Carriage Of 11 Kv Metering Pilfer From Orai Store To Site Store 11 Carriage Of 11 Kv Ct / Pt Unit For Double Metering From Orai Store To Site Store 12 Carriage Of 11Kv Abc Cable Of Size 3X50 And 1X16sqmm From Orai Store To Site Store 13 Part-B 14 Supply Of The Following Line Item As Per Resspo Drawing & Dimension ( Meterial Supplied By Contractor ) :- 15 M / S Bracing With Clamp Of Size ( 65X65x6x2700mm ) 16 M / S Angle Bracing With Clamp Of Size ( 65X65x6x2240mm ) 17 Stay Set Complete With Stay Wire & Stay Insulator 18 Cable Jointing Kit For 11Kv Of Size 3X70 / 3X120sqmm 19 M.S. Top Channel Of Size ( 125X65x2240mm ) With Clamp, Nut, Bolts & Washer 20 M.S. Dropper Channel Of Size ( 100X50x2228mm ) With Nut, Bolts & Washer 21 L.T. Insulator And Clamps 22 Part-C 23 Erection Of The Following Supports After Making Of Pits As Per Resspo Norms & Filling Of Pits By Concrete Of Ratio 1:4:8 ( Cement Brick Balast & Sand ) . Fitting Of All Accessories As Cross Arm, Top Channel, Bracing Angle, Pin Insulator, Disc Insulator, Danger Board, Number Plate, Barbed Wire & Clamps Etc. Plinthing Of Support Above 300Mm Ground Level By Concrete Of Ratio 1:4:8 ( Cement Brick Balast & Sand ) Will Be Done At The Time Of Erection Of Pole. Painting Of St Pole Structure As Per Resspo Norms Also ( All Type Of Nut, Bolts & Grouting Material Etc. Will Be Provided By Contractor ) . 24 Erection Of L.T. Line With Laying Of 3X50 Sqmm Or 3X16 Sqmm 25 Erection Of Single Support Of S.T Pole 11 Mtr Long. 26 Erection Of Double Pole Structure On S.T. Pole 11Mtr Long Complete With Bracing. 27 Erection Of Double Pole Structure On St Pole 11 Mtr Long For Sub Station 28 Erection Of Single Support Of Pcc Pole 8.5 Mtr Long. 29 Erection Of Double Pole Structure On Pcc Pole 8.5 Mtr Long Complete With Bracing. 30 Erection Of Double Pole Structure On Pcc Pole 8.5 Mtr Long For Sub Station 31 Charging Of11 / 0.4Kv 25 / 63 Kvat / Fwith All Fitting. 32 Cemical Earthigof11 / 0.4Kv 25 / 63 Kvat / F Body & Newtral 33 Charging Of11 / 0.4Kv 100Kvat / Fwith All Fitting. 34 Cemical Earthigof11 / 0.4Kv 100 Kvat / F Body & Newtral 35 Charging Of11 / 0.4Kv 250 / 400 Kvat / Fwith Construction Of Plinth Of Size 2X2x1.5Mtr 36 Cemical Earthigof11 / 0.4Kv 250 / 400 Kvat / F Body & Newtral 37 Erection Of Stay Set With Stay Wire, Stay Clamp & Stay Insulator Including With Grouting Of Stay Set By Concrete Of Ratio 1:4:8 As Per Resspo Norms Before Back Fitting Of The Pits Including Binding, Climbing, Clamping, Tightening And Nozzeling Of Stay Wire In All Respect As Per Resspo Norms. All Clamps, Nuts, Bolts, Stay Insulator, Cement. Brick, Ballast, Sand Etc Would Be Provided By The Contractor. 38 Laying And Sagging Of 3 Phase Acsr Rabbit / Weasel Conductorfrom Double Pole At 33 / 11 Kv Substation To Double Pole At Tapping Point Of 11 Kv Feeder Line Including Jumpering, Hoisting Fixing All Type Of Insulators, Binding Jointing And Its Clamping Etcin All Respect. As Per Respo Norms. 39 Earthing Of Each St / Pcc Poles Of The Line Is To Be Done By Inserting The Ms Earth Rod ( 1800X20mm ) Into Soil By Hammering And Properly Fastning With Gi Wire To Each Support & Its Accessories By Nut & Bolt. Earthing Rod Must Be 0.15Mtr.Above From The Plinth Of The Support. All Type Nut & Bolt, Earthing And Gi Wire Will Be Suppliedby The Contractor. 40 Guarding Of Ht / Lt / Road / River Crossing Etc. By Providing G.S Earth Wire 7 / 16 Swg / Gi Wire No. 8 / 10 And Making Net With Difference Of 1.00 Mtr. Completely Including Fixing Of Channel / Angle Etc. With Proper Locking At Each Support As Per Resspo Norms. All Type Nut &Bolts, Would Be Given By The Contractor. 41 Laying Ofsingle Circuit 11 Kv 3X120 Sq. Mm Xlpecable In Normal Soil In By Digging Of Trench 1050 Mm Deep, 750 Mm Wide Including Supply Of Required Material As , Fine Sand, 1St Class Bricks, Stone Slab. Will Be Supply By Contractor. 42 Fixing Of 11 Kv 3X70sqmm O / D And I / D Sizes, Makeraychem / Denson. ( Cable Box Will Be Supplied By The Contractor ) . 43 Fixing Of 11 Kv Cable Root Marker 44 Termination Of 11 Kv 3X70 Sq Mm Size Xlpe Cable By Filling 11 Kv Heat Shrinkable Type Cable Boxes Including Proper Connection With 11 Kv Line, Double Metring Ct / Pt Unit, 11 Kv Metring Pilfer And 11 Kv Switch Gears And Double Poles By Providing Suitable Connectors.All The 11 Kv Cable Boxes Of Different Sizes Makeraychem / Denson. ( Cable Box Will Be Supplied By The Contractor ) . 45 Hoisting Of 11 Kv 3X120 Sq. Mm. Xlpe Cable On Double Pole With C Class Gi Pipe Of Size 6 Dia 3 M Longincluding Its Jumpering Complete With Clamps, Nuts And Bolts. 46 Construction Of T / F Plingth And Fencing For 250 / 400 Kva T / F Of Size 2X2x1.5 Mtr. 47 Installation Of 11 Kv Metering Pilfer In Meter Room And Making H.T Connections. 48 Installation Of Double Metering Ct / Pt Unit. 49 Clearing Of The Line Route By Cutting Of Tree Branches During Erection Of Line And Also Upto The Time Of Energisation Completely As Per Direction Of Site Incharge.
