Military Engineer Services-MES has published Provision Of Certain Sanctioned Works At Mil Stn Sangrur Under Ge ( South ) Patiala As Per Tender Documents. Submission Date for this Tender is 30-08-2022. Civil Work Tenders in Patiala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Aug-2022 | Revised pages | Other | 23-08-2022 |
| 2 | 23-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-08-2022 |
| Sl. No. | Item Description |
| 1 | Supply and laying of pipe galvanized, medium grade, ISI marked including all pipe fittings and laid in trenches, in floors/ under road complete all as specified and directed for the following sizes : |
| 2 | 80 mmdia |
| 3 | S&F Sluice valve, cast iron body, having mild steel spindlewith iron wheelat top, class PN 1.6, with flanged ends,drilled suitably, complete with joints and including necessary joints by means of bolts, nuts washers and rubber gaskets, conformig to IS14846-2000 complete all as specified and directed for the following sizes : |
| 4 | 80 mm dia bore |
| 5 | Construction of brick masionary valve pit with 3 mm thick mild steel sheet coverand angleeiron frame of size 40x40x6mm including provision of suitabllee holdfast to hold the frame , locking arrangeementand lifting handle , duly paintedwith two coats of synthetic enamelpaint over a coat ofred oxide primerr andall as specified ofthe following size |
| 6 | 1200x1200x1200 mm (Interal dimension) |
| 7 | Supply and installation of Monoblock pump set suitable for 415 V, 3 phase of capacity 10 HP and PCC foundation, including shed size of 3x3x2.5 m with galvalume sheet of thickness 0.50mm including vertical support of MS pipe of 75mm dia medium grade, Horizontal support of 50mm dia MS pipe medium grade including hard standing 100mm in 1:2:4 type B-1 over 100mm hard core complete all as specified anddirected. |
| 8 | Supply and fix DOL starter for 10 HP Monoblock pumpset complete all as specified anddirected. |
| 9 | M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 3.25 mtr deep below the normal ground level ) with top edge of plate not less than 2.5 mtr below the normal ground level connected to galvanized earth strip 32X6 mm thickby means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) medium grade GI watering pipe 20mm dia with funnel and wire mesh and 40 mm bore GI pipe light grade proection pipe up to test point etc including excavation and charcoalt ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I |
| 10 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F GI Tube light grade 80 mm dia as in cable protection pipe complete all as specified & directed by Engr in charge. |
| 12 | Supply and fix Non return sluice valve conforming to IS, 80 mm dia size complete all as specified anddirected by Engineer-in-charge. |
| 13 | Supply and fix Foot Valve conforming to IS, 80 mm dia complete all as specified anddirected by Engineer-in-charge. |
| 14 | Supply and fix Strainer Y type conforming to IS, size 80 mm dia complete all as specified anddirected by Engineer-in-charge. |
| 15 | Supply, installation, commissionningand testing of outdoor feeder pillarmade out of CRCA sheet 3.0 mm thick vermin proof factory made CPRI approved, withcopper bus bar of capacity 100 Amps for 3 phase and neutralwith nessary angle iron 50 x 50 x 6 mm support frame including two coats powder painting over a coat of red oxide primer and grout in PCC complete all as specified and directedcomprising of the followingcomplete all as specified anddirected. (A) INCOMING : (a) MCCB 63 Amps Four pole 25 KA-01 No (b) Indicator lamps RYB LED type(Set of Three)-01 No (B) OUTGOING : (a) MCCB TPN 32 Amps 25 KA-02 No (b) Wiring of above accessory with suitable size of copper conductor cable. Note :-(i) All MCCBs / instruments / MCBs / Bus Bar shall be housed in a separate housing with on- off latches in the housing. (ii) Space for provn of one extra MCCB should be provided in the panel. |
| 16 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil complete all as apecified and directed. |
| 17 | Returning filling in including ,spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed. |
| 18 | Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed |
| 19 | M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified. |
| 20 | Supply and layingbest quality bricks locally availanle sub class ‘B’bricks (old size) for cable protectioncover laidflat and dry in trenches over the cable perpendicular to the direction of cable ailas specified& directedbyEngr-in-Charge. |
| 21 | M&L for point wiring with FRLSPVC insulated unsheathed multi-stranded copper conductor 4.0 Sq.mm (nominal area ) single core cable 1100 Volt grade drawninand including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes(Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLSPVC insulated unsheathed stranded copper conductor 4.0 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified anddirected by Engineer in Charge.(For AC) |
| 22 | Supply and install hi wall split units indoor/outdoor 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity as shown complete all as specified and directed. |
| 23 | S&F MCBDB SPN4 Waywith acrylic double doorcomplete all as specifiedand directed. |
| 24 | S&FMCB SPN 240V 40 Amps C series 10 KA complete all as specified and direceted. |
| 25 | S&F MCB SP 240V 6 to 32 Amps C series 10 KA complete all as specified and direceted. |
| 26 | M&L Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps 240 V complete all as specified and direceted. |
| 27 | M&L for earthing complete with galvanisedsteel earth plateelectrode 600x600x6mm thick buried directlyin ground(earth pitnot less than2 mtr deep belowground levelwith top edgwof the platenot less than 1.4 mtr belownormal ground level, connected earth wire 4 sqmm by means ofbolts nutscheck nutsand washersof galvanisediron or steelall as shownin electrical plateNo 5 connectedto earthingtest pointall as specifiedor indicated includingPCC pitin PCC(1:3:6) type C-1 cast ironframe50mm thickpre castRCC(1: 11/2:3)nominal mixcover slabreinforcedwith 8 mmdia mild steeldeformed bar15cc and suitable handleof 10 mm Diaround barincluding necesaryexcavationearth workin soft/loose soiland disposalof spoilto a distancen.exc 50m and funnelwithwatering pipewire meshcopper lugsetc GI protectionpipe of size 15 mm boreincluding testing completeall s specified & directed by Engr in Charge. |
| 28 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified anddirected. |
| 29 | Supply and laying 10 sqmm 2 core cable XLPE/PVC insulated armoured and sheathed LT 1100 volts grade with aluminium conductor complete all as specified anddirected. |
| 30 | S&F GI Tube light grade 50 mm dia as in cable protection pipe complete all as specified & directed by Engr in charge. |
| 31 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed by Engr-in-Charge. |
| 32 | Taking down cement plaster on walls built in cement mortaretc including racking out joints, hacking for key.Scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge. |
| 33 | M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. Note : Water proofing compound shall be measured and paid saparately under item . |
| 34 | M&L 10mm thick cement plastering in cement mortar CM 1:6finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 35 | Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed by Engr-in-Charge. |
| 36 | M&L Preparation ofnew plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 37 | M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats ofdistemperoil emulsion over complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L Preparation ofold plastered or unplastered surfaces of walls, two coats of cement base paint complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L Preparation of old plastered or unplastered surfaces of walls and applying two coats ofdistemperoil emulsion over complete all as specified and directed by Engr-in-Charge. |
| 40 | Preparing old plastered surfaces of ceilings and applying one coat of white wash inall as specified and as directed by Engineer- in- charge. |
| 41 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled anddouble shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. |
| 42 | S&F factory made aluminium 50 micron powder coated deco grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified |
| 43 | S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thickPVC celuka Board wooden finishpre-laminated on one side and plain on other side below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 44 | S&F aluminium extruded door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 45 | Dismantlingof brick work including allquoins arches pillars etc built in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for brick work in cement mortar (1:6) using sub class "B" bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed by Engr-in-Charge. |
| 47 | All as per item No. 43 above butusing old bricks complete all as specified and directed by Engr-in-Charge. |
| 48 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engr-in-Charge. |
| 49 | Demolition of mud phuska, in roof any thickness including leeping plastering (whether full, thickness removed or only a part thereof) complete all as specified and directed by Engr-in-Charge. |
| 50 | Scraping surfaces of roof by wire brushing removing all loose dirt and cleaning and wahsing down the surfaces with water complete all as specified and directed by Engr-in-Charge. |
| 51 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square meter including cleaning the surface complete all as specified and directed by Engr-in-Charge. |
| 52 | PCC 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 ,complete all as specified and directed. |
| 53 | Applying membraneonprimed surface by press applicationmethod with minimum75mm longitudinal wiselap and 100mmover lap on the transverse direction duly sticked usingAPP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.00 Kg/Sqm water proofing membrane, black finished non wovenpolyester reinforced (wt not less than 150gm/ Sqm) 3mm thick complete all as specified and directed. |
| 54 | M & L plain cement concrete tiles 20-22 mm thick , type B-1 type (1:2:4) pointed in neat cement slury over 15mm thick sceed bed inCM (1:4) complete all as specified and as directed. |
| 55 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge. |
| 56 | M&L for PCC (1:2:4) type C-2 using 20mm graded aggregate as in coping including necessary form work all as specified and directed. |
| 57 | Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed. |
| 58 | Demolition of cement concreteun -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engr-in-Charge. |
| 59 | 75 mm thick PCC (1:3:6) type C1 (using 20mm grade aggregate) as in plinth protection, finishing the surfaces even & fair w/o using extra cement complete all as specified and directed by Engr-in-Charge. |
| 60 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed by Engr-in-Charge. |
| 61 | Providing and Laying ceramic glossy finish, joint free premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge. Note : Dado should be flushed with the wall plastering. |
| 62 | M&L for anti-skid premium (1st) quality ceramic coloured tiles 400 X 400 mm and 7-8 mm thick joint free, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. |
| 63 | Providing and Laying Premium (1st quality) straight edge, stain free, gloss finish, square marbonite single charged vetrified tiles in 600x600x 9 to 10mm thick in floors etc in approved shade, set & jointed in neat cement including and over 15mm in screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engr-in- Charge. |
| 64 | M&L for single charge, stainless, vetrified tiles, Premium (1st) quality straight edge, coloured tiles 600x100 mm and 9-10 mm thick, as in skirting/dado etc. in any pattern of light coloured tiles as approved, on vertical surfaces such as in skirting/dado etc, height not more than 150 mm, set and jointed in neat cement slurry over incl 10mm thick rendering in cement mortor (1:4) and pointed in white coloured cement with pigment to match the colour of tiles complete all as specified. |
| 65 | M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-Charge. |
| 66 | Providing machine cut Kota stone slab flooring of Size 550x550x20 mm thicklaid over 20mm thick cement mortar 1:4 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position as described and specified |
| 67 | Same all as per ser item No.63 hereinbefore but on vertical surfaces as in skiting /dado of size 550x150x20 mm thick all as specified and directed. |
| 68 | M&L Granite (of any type in two piece ) tiles 20mm thick machine cut, on kitchen platfrom bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types and laid over screed bed 15 mm thick in cement mortar (1:4) all as directed and specified. |
| 69 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 70 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 71 | Refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and directed by Engr-in-Charge. |
| 72 | 35mm thick plain framed (Factory made) Panelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces.The size of rail and stile asper IS-1003 (Part-I), kiln seanoned and chemically pressure treated all as specified. (a) Stainless steel (304 Grade) Finished butt Hinges 150mm -4 nos. per leaf. (b) Stainless steel (304 Grade) Finished square Tower Bolt 200mm -2 nosper leaf. (c) Stainless steel (304 Grade) Finished Handles 200mm-2 nos per leaf. (d) Stainless steel (304 Grade) Finished Sliding Bolt 300mm - 1 nos.per leaf. (e) Stainless steel (304 Grade) Finished Floor Door Stoper - 1 nos.per leaf. |
| 73 | 35mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified. (a) Stainless steel (304 Grade) Finished butt Hinges 150mm -4 nos. per leaf. (b) Stainless steel (304 Grade) Finished Tower Bolt 200mm long-2 nosper leaf. (c) Stainless steel (304 Grade) Finished Handles 200mm-2 nos per leaf. (d) Stainless steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X300mm - 1 nos.per leaf. |
| 74 | Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler,doubled panelled anddouble shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf. |
| 75 | S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with andcomplete fixed in all respect as specified. |
| 76 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 77 | Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings. |
| 78 | 100 mm size PVC butt hinges all as specified |
| 79 | 150MM PVC handles all as specified and directed |
| 80 | 200mm long PVC tower bolt all as specified and directed |
| 81 | Taking down Shutter exc 1.00 Sqm and n. exc 2.00 Sqm complete all as specified. |
| 82 | Factory made pressed steel frames for doors with one with one or more rebates size of frame (105 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc.,complete as specified, supplied and fixed. |
| 83 | Factory made pressed steel frames for doors with one with one or more rebates size of frame (125 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc.,complete as specified, supplied and fixed. |
| 84 | Stainless steel gauge wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. all as directed. |
| 85 | M&L 25mm thick PCC 1:2:4 type B1 using 12.5 mm graded stone aggregate complete all as specified and directed. |
| 86 | Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar works incl provison of supports if reqd and dubbing with PCC (1 : 1.5 : 3) using 6 to 12 thick graded stone aggregate in any portion of 15mm to 50mm thick and finshing to desired shapes. |
| 87 | Factory made steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing. |
| 88 | Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and fair without using extra cementall as specified. |
| 89 | M&L for applying two coats of oil bound distemper over one coat of primer over a coat of 2mm thick wall care putty on new plastered surfaces of walls including preparation of newsurface complete all as specified and directed. |
| 90 | M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 2mm thick wall care putty filling complete all as specified and directed. |
| 91 | M&L for preparation of new plastered surfaces of ceiling and applying three coats ofwhite wash all as specified & directedby Engineer-in-Charge |
| 92 | M&L for preparation of old plastered surfaces of ceiling and applying two coats ofwhite wash all as specified & directedby Engineer-in-Charge |
| 93 | Complete removal of existing treatment and applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 94 | Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 95 | Preparing new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 96 | Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 97 | Preparing new surface of steel material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 98 | Preparing old surface of steel material of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of priming complete all as specified and directed by Engr-in-Charge. |
| 99 | Rotational moulded polythene three layer water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description complete all as specified and directed by Engr-in-Charge. |
| 100 | 15 mm dia CP stop cock cast copper alloy fancy type withlong shank and cup (concealed type) , screw down high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F in repair 15 mm dia Bib Tap cast copper alloy fancy type CP withcrutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge. |
| 102 | Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20mm having minimum weight 210gm/each fixed valve complete all as specified. |
| 103 | Vitreous china squatting pan white colour of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and leadfront or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified. |
| 104 | S/F in repairs low level dual flushing cistern of PVC 10 ltr capacity incl 45cm long PVC connection with brass nut at both ends, PVC flush pipe 32 mm bore and mild steel brackets of angle iron 25 x 25 x 3 mm, oval all length20 cm with red-oxide primer complete all as specified (ISI Marked) incl taking down HL/LL flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed. |
| 105 | Brass chromium plated shower roses 50mm size with swivel joint any size fixing in repairs all as directed and specified. |
| 106 | S&F in repairs vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed by Engr-in-Charge. |
| 107 | S&F concealed (with long shank and cup) stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F unbreakable corner set for bath room all as specified and directed. |
| 109 | S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding including cutting out old damaged/inactive helical door spring complete all as specified and directed by Engr-in-Charge. |
| 111 | Taking up or down steel water tubing and connection 15 mm bore in pipe incl cleaning for re-fixing or removel to store complete all as specified and directed by Engr-in-Charge. |
| 112 | Taking up or down steel water tubing and connection 20 mm bore in pipe incl cleaning for re-fixing or removel to store complete all as specified and directed by Engr-in-Charge. |
| 113 | Steel water tubing 15mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 114 | Steel water tubing 20 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 115 | Fixing only old galvanized iron pipe 15mm bore in new or old position with new fittings as in wall and ceiling or laid in floors including taking down or up as existing at site complete all as specified and directed by Engr-in-Charge. |
| 116 | Fixing only old galvanized iron pipe 20mm bore in new or old position with new fittings as in wall and ceiling or laid in floors including taking down or up as existing at site complete all as specified and directed by Engr-in-Charge. |
| 117 | S&F Stainless steel sink with drainage board1.00 mm thick for kitchen with plugs washers and waste pipe of 40mm dia PVC west pipeincl new fittings upto floor trap,CP waste fittingand including cantileversand cast brackets, connecting union, etc, overall size 915mm x460 mm with bowl size 410mm x 330mm x 160mm including making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed complete all as specified and directed by Engr-in-Charge. |
| 118 | 600mm x 450mmmirror of selected quality glass mounted on 6mm thick AC building board with alluminium frame all around hanging to wall with rawal plug and iron slits cup washers all as directed. |
| 119 | S&F CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair complete all as specified and directed by Engr-in-Charge. |
| 120 | S&F in repairsCP Soap dish of size approximate size 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 121 | 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors,finished even & fair surface without using extra cement complete all as specified and directed . |
| 122 | M&L cementconcrete 1:2:4 typeB-1using 20mm graded stone aggregate as in holdfast blocks complete all as specified and directed by Engr-in-Charge. |
| 123 | Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipe) set in cement mortar/concrete 75 /110 mm dia fixed in position complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply & fix 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 125 | All as per item No 121hereinbefore above but bore of pipe 75 mm dia fixed to walls/floor. |
| 126 | S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door complete all as specified and directed by Engr-in-Charge. |
| 127 | S&F PVC (SWR) bends 110mm bore of any radius with access door complete all as specified and directed by Engr-in-Charge. |
| 128 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed by Engr-in-Charge. |
| 129 | Demolition of cement concrete (reinforced) other than ground floor, beams, chajja, landing etc complete all as specified and directed by Engr-in-Charge. |
| 130 | Providing RCC M-25 design mix cement concrete 1:2:4 type B-1 ( 20mm graded agg ) as in chajjas landing cover slab, shelves etc and set in cement Mortar 1 : 4 complete all as specified and directed by Engr-in-Charge. |
| 131 | Mild steel TMT bars, 8 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified. |
| 132 | Demolition of cement concreteany description and any position not otherwise specifically provided (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 133 | PCC 1:2:4 type B 0) using 12.5 mm graded stone aggregate 25 mm thick mixing with WPC as in bedding in sunken portions etc complete all as specified and directed. |
| 134 | Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed. |
| 135 | Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed by Engr-in-Charge. |
| 136 | Providing 40 mm dia GI pipe medium grade spouts 50 Cm long complete all as specified and directed by Engr-in-Charge. |
| 137 | Supply only WPC complete all as specified and directed by Engr-in-Charge. |
| 138 | M&L for brick work in cement mortar (1:4) using sub class "B" bricks staight or curved on plan exc in half brick thick wall complete all as specified and directed by Engr-in-Charge. |
| 139 | S&F 18 mm thick 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 140 | S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. |
| 141 | S&F 12 mm thick LEAD FREE PVCCeluka plyfixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. |
| 142 | S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metalmatt finished complete fixed in position complete all as specified and directed by Engr-in-Charge. |
| 143 | S&F6 mm thick LEAD FREE PVCply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. |
| 144 | S&Fauto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. |
| 145 | S&FBall bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified. |
| 146 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished150mm long matt finished complete fixed in position all as specified. |
| 147 | S&F Piano Hinge of size 19 mm stainless steelcomplete all as specified and directed. |
| 148 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer"s instructions complete all as specified and directed by Engr-in-Charge. |
| 149 | S&F Stainless Steel 304 grade wire Basket (avg. weight 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets/Cutlery etc. for kitchens of required suze complete fixed in position all as specified. |
| 150 | S&Fstainless steel plate racks, glossy finish, for kitchen overall size 600mm x 600mm x 250mm complete fixed in position as recommended by manufacturer with SS screws/fasners complete all as specified and directed by Engr-in-Charge. |
| 151 | S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and directed by Engr-in-Charge. |
| 152 | M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connectinglegs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. |
| 153 | S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer"s instructions all as specified. |
| 154 | Taking down carefully copper/ aluminium point wiring (light fan socket or power) complete along with fittings such as switches, ceiling roses, Pendants regulators Tube fittings and other Kits & fittings/conduitfromsurface /wall . Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location. Note :- Serviceable fitting / fixtures will be reused in the work as directed by Engineer- in-Charge |
| 155 | Taking down un-serviceable main switch, DB’s insulators, DB for MCB etc of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge. |
| 156 | Taking down ceiling fan of any descrptions, servicing and repairs of fans as required, fixing back, connecting and testing the fanfor its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge. |
| 157 | Taking down exhasustfan of any descrptions, servcing and repairs of fans as required, fixing back, connecting and testing the fanfor its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge. |
| 158 | Taking down elect water heater of any descrptions, servcing and repairs of geyseras required, fixing back, connecting and testing the geyser for its satisfactory functionincluding making good the disturbed surface and matching the colour of wall with the existing colour wash / paint / distemper wherever required (as per the existing ) all as directed by Engineer-in-Charge. |
| 159 | M & L for point wiringwith FRLSPVC insulated unsheathed multi-stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawninand including rigid non metallic concealed PVC Conduit of suitable size (not less than 20 mm) on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes(Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLSPVC insulated unsheathed stranded copper conductor 1.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified, for the following :- One light/fanpoint controlled by one 1-way switch |
| 160 | One lightpoint controlled by two 2-way switch |
| 161 | One3/5 pin socket outlet, 5 Amp on independent board |
| 162 | One3/5 pin socket outlet, 5 Amp on same board |
| 163 | One bell /buzzerpoint controlledby one push button on independent board |
| 164 | M&L for point wiring with FRLSPVC insulated unsheathed multi-stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable 1100 Volt grade drawninand including rigid non metallic concealed PVC Conduit on wall , surface of ceiling with all fittings, such as tee, bend, elbow, socket etc including pressed steel sunken boxes(Terminal boxes) with earth dolly,duly galvanised, with white shade frame & cover plate of suitable module for modular switch / or sockets including FRLSPVC insulated unsheathed stranded copper conductor 2.5 Sq.mm (nominal area ) single core cable as earth continuity conducter to common earth and connected to earth dolly, complete all as specified anddirected by Engineer in Charge. |
| 165 | Dismantling/Taking down existing unserviceable sub main wiring from batten / conduit of any size all as directed. Removing the material from work site and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface / location complete all as specified and directed by Engr-in-Charge. |
| 166 | M &L for sub main surface wiring with PVC insulated unsheathed copper conductor cable of size 6 Sqmm single core through concealed rigid nonmetallicPVC conduit of suitable size (Not less than25mm dia)inwall and surface of ceiling including 6 Sqmm PVC insulated unsheathed copper conductor cable for continuous earthing form main earth dolly includingmakinggoodthedisturbedpotionofwall. (Note :- Two run of 6 Sqmm copper cable one run of 6 Sqmm copper cable and PVC conduit will be measured as a single length) complete all as specified and directed by Engr-in-Charge. |
| 167 | Switch Modular type, 6 Amp, 240 Volts , one way complete fixed as in repair all as specified. |
| 168 | Switch Modular type,6 Amp, 240 Volts , Two way complete fixed as in repair all as specified. |
| 169 | Switch Modular type, 16 Amp,240 Volts , one way complete fixed as in repair all as specified. |
| 170 | Socket outlet, Modular type, 6 Amp complete fixed as in repair all as specified. |
| 171 | Socket outlet, Modular type, 6&16 Amp complete fixed as in repair all as specified. |
| 172 | Bell Push, Modular type, 6 Amp complete fixed as in repair all as specified. |
| 173 | Fan regulator, modular type electronic step type complete fixed as in repair all as specified. |
| 174 | S&F ceiling rose surface bakelite two to three terminal 65x50 mm complete all as specified and directed by Engr-in-Charge. |
| 175 | S&F in replacement Tube light fittings LED type 1x20 Watt4 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable all as specified & directed. |
| 176 | S&F in replacement Tube light fittings LED type 1X10 Watt, 2 ft long incl LED tube rod and incl 3 core flexible wire 0.75 Sqmm copper cable all as specified & directed. |
| 177 | Supply & fix LED bulk head ,10 W complete all as specified & directed. |
| 178 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as directed. |
| 179 | S&F LED Bulb 9 watt 230 volt retrofit type complete all as directed. |
| 180 | S&F in bellding dong operating on AC 230 volt single phase complete all as specified and directed by Engr-in-Charge. |
| 181 | S&F MCBDB SPN8 Waywith acrylic double door complete all as specifiedand directed. |
| 182 | S&F including flushing in wallMCB distribution board verticalTPN 4 way 415 Volts AC double door type sheet steel phosphotised powder painted with bus bar neutral earth barincluding provision of MCB TPN, FP 100 Ampconforing to IP 43as incomer all as complete specified and directed. |
| 183 | S&F MCB 4 TPN100Amp 415 voltwith breaking capacity of 16 KA complete all as specified and direceted. |
| 184 | Taking Down the KWH meteralong with wooden board/DB after removingall electricalconnection complete all as directed by Engineer in Charge. |
| 185 | Refixing&connecting the same or newserviceableKWH energy meterafter wiring complete all as directed by Engineer in Charge. |
| 186 | S&F Sheet metal enclosure factory made of size 20cm x 25cm x 12.5 cm deep box made out of 2mm thick ms sheet with double door with locking arrangement , epoxy power coated holes drilled for cable entries suitable for accomodating electric energy meterincluding brick/cement works as per site requirementincludiing flushing the box in walll and making good the disturbed portion of wall /surface complete all as specified & directed bby Engr in charge. |
| 187 | Taking down old U/S LT UG cable of any size from trenches/pipe/floor/walls complete all as specified. |
| 188 | Supplylaying jointing cable XLPEinsulatedPVC shetahtedstrip wire armoured1100 volt4 core 25 sqmm multi stranded aluminiumconductor laid in trenches/wall/ducts etcincluding necessary fixing arrangement such as cable lugs glands etc completeafter removing/taking out extg unsvcable to the entire satisfaction of Engr in Charge. |
| 189 | S&F GI Tube light grade 50 mm dia as in cable protection pipe complete all as specified & directed by Engr in charge. |
| 190 | S&F Modular white cover plate with frame 1 module completeall as specified & directed by Engr in Charge. |
| 191 | S&F Modular white cover plate with frame 2 module completeall as specified & directed by Engr in Charge. |
| 192 | S&F Modular white cover plate with frame 3 module completeall as specified & directed by Engr in Charge. |
| 193 | S&F Modular white cover plate with frame 8 module completeall as specified & directed by Engr in Charge. |
| 194 | S&F Modular metal flush box 1/2 module completeall as specified & directed by Engr in Charge. |
| 195 | S&F Modular metal flush box 3 module completeall as specified & directed by Engr in Charge. |
| 196 | S&F Modular metal flush box 8 module completeall as specified & directed by Engr in Charge. |
| 197 | S&F Modular white blank plate complete all as specified & directed by Engr in Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
