Karnal Cooperative Sugar Mills Limited has published Tools Tools , Tools ( All Tools Taparia, Jhalani Make ) , D. Spanner Set ( Mm Size 6 To 32 , Ring Spanner Set ( Mm Size 6 To 32 , Adjustable Wrench 12” , Pipe Wrench- 14” , Pipe Wrench- 18” , Pipe Wrench- 24” , Allenkey Set ( Mm Size ) , . Submission Date for this Tender is 19-08-2022. Cutting Crimping and Punching Tools Tenders in karnal Haryana. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Tools ( all tools Taparia, JHALANI make) |
2 | D. Spanner set ( mm size 6 to 32 |
3 | Ring Spanner Set (mm Size 6 to 32 |
4 | Adjustable wrench 12” |
5 | Pipe wrench- 14” |
6 | Pipe wrench- 18” |
7 | Pipe wrench- 24” |
8 | Allenkey set (mm size) |
9 | Box Spanner set ( mm size ) |
10 | Hand grease Pump 3kg heavy duty |
11 | Bearing Puller 8” with three leg ( make- Taparia) |
12 | Bearing Puller 16” with three leg ( make- Taparia) |
13 | Digital Multimeter, make – Fluke, Model-17B Digital, Range -1000 VAC/DC, 600 VAC/DC |
14 | Clamp Meter, make Fluke, model-Fluke 319, Range- True 1000 Amp RMS AC/DC |
15 | Crimping Tool, size-1.5mm-16mm, make-Jainson |
16 | Crimping Tool, Size-25mm-400mm ( Hydrolic), make- Taparia |
17 | screw driver set 840 , make Taparia |
18 | Needle file, Size-12”, make Black-Decker |
19 | Flat File , Size-12”, make Black Decker |
20 | Half- Round file, size-12” make Black Decker |
21 | Mini Hack Saw frame with blades, make bosch |
22 | Big Hacksaw frame with blades, make-Taparia size 12" |
23 | Allen key set (inch), make-Taparia |
24 | Nose pliers (8”) make Taparia |
25 | Slide Wrench (8”) make Taparia |
26 | Slide Wrench (12”) make Taparia |
27 | Combination Plier, make Taparia, 8” |
28 | Line Tester, make Taparia, 500V |
29 | Screw Driver (6”) make Taparia |
30 | Screw Driver (8”) make Taparia |
31 | Screw Driver (12”) make Taparia |
32 | Screw Driver (12”) Heavy Dury” |
33 | Box Spanner Set (6-32mm) make Taparia |
34 | Box spanner, Screw & Socket driver Set 46 Pics. Make Taparia |
35 | Soldering Iron, 25 watt, 230VAC make Corslet |
36 | Soldering Flux, make Corslet |
37 | Soldering wire, make Corslet |
38 | Hot Air blower, make Bosch 350 watt, 280VAC |
39 | Set of Screw Driver ( Taparia) SA-46 |
40 | Hammer Drill Machine ( Boss) |
41 | Neon Testermake -Taparia |
42 | Hammer ( 1kg) make Taparia |
43 | Hammer ( 2kg) make Taparia |
44 | Hammer (5Kg) make Taparia |
45 | Hammer ( 6kg) make Taparia |
46 | Circlip Pliar outerside 8” |
47 | Circlip Pliar innerside 8” |
48 | Earth Tester make-MECO |
49 | Centre Punch ‘ Taparia ‘ |
50 | Bearing Puller Size 100mm ‘Taparia’ |
51 | Bearing Puller Size 250mm ‘Taparia’ |
52 | Allen Key set 1.5mm to 10mm |
53 | Allen key 12mm |
54 | Allen key 14 mm |
55 | Allen key 16 mm |
56 | Ring spanner 6mm to 32 mm |
57 | D Spanner 6mm to 32 mm |
58 | Ring spanner 36mm to 41 mm |
59 | D spanner 36mm to 41 mm |
60 | Ring spanner 41 mm to 46 mm |
61 | D spanner 41mm to 46 mm |
62 | Ring spanner 46 mm to 50 mm |
63 | D spanner 46 mm to 50 mm |
64 | Singal head D spanner 50 mm |
65 | Singal head D spanner 55 mm |
66 | Singal head D spanner 60 mm |
67 | Singal head D spanner 65 mm |
68 | Ring type hammering spanner make- Saloni 36mm |
69 | Ring type hammering spanner make- Saloni 41mm |
70 | Ring type hammering spanner make- Saloni 46mm |
71 | Micrometer 0 to 25 mm |
72 | Micrometer 12 mm to 150 mm |
73 | Dial guage with magnet (mitutoyo) stand 0 to 10 mm |
74 | Master level 150 mm length (0.02/1mtr) make- mitutoyo make |
75 | Filler gauge 6” (0.03-1mm) |
76 | Filler gauge 12” (0.03 -1mm) |
77 | AG-4 Grinder make- Bosch |
78 | AG-7 Grinder make- Bosch |
79 | Hand Drill machine Piptal type12mm make- Bosch |
80 | Chiesel 6” make- Taparia |
81 | Round file medium¼” |
82 | Round file medium ½” |
83 | Triangle file medium 8” |
84 | Triangle file 12” |
85 | Flat file medium 14” |
86 | Grease geen 1 kg (hand ) |
87 | Grease geen 5 kg |
88 | Manila rope 25 mm |
89 | Adjusting wrench 6” |
90 | Adjusting wrench 8” |
91 | Adjusting wrench 12” |
92 | Pipe wrench 12” |
93 | Pipe wrench 18” |
94 | Pipe wrench 24” |
95 | Pipe wrench 8” |
96 | Allen key 19mm |
97 | Flat file14” polish smooth |
98 | H.S.S tool bit make marinda Tool bit= 1” x1”x6” |
99 | H.S.S Tool bit ¾”x3/4” x6” |
100 | H.S.S Tool bit ½” x1/2” x6” |
101 | H.S.S Tool bit 3/8” x3/8” x6” |
102 | H.S.S Tool bit ¼” x ¼” x 6” |
103 | Carbit Tipped Tungiten Bit 1” V shape |
104 | Carbit Tipped Tungiten Bit ¾” V shape |
105 | Carbit Tipped Tungiten Bit 1” Right hand |
106 | Carbit Tipped Tungiten Bit 1” Left hand |
107 | Carbit Tipped Tungiten Bit ¾” Right hand |
108 | Carbit Tipped Tungiten Bit ¾” Left hand |
109 | Thred gauge mm pitch and inches size |
110 | Outside caliper-500mm |
111 | Inside caliper-500mm |
112 | Outside caliper-1300mm |
113 | Inside Caliper – 1300mm |
114 | Dead Center Shocket no 1 |
115 | Dead Center Shocket no 2 |
116 | Dead Center Shocket no 3 |
117 | Dead Center Shocket no 4 |
118 | Dead Center Shocket no 5 |
119 | Oil gun ½” litter |
120 | Slide wrench 12” |
121 | Steel measuring Tape 50” ( Feet)free mans |
122 | Steel measuring Tape 5mtr.free mans |
123 | Flate file 14” make j.K Hindustan rough |
124 | Flate file 14” Fine J K hindustan |
125 | Green carbide grinder wheel size 250x25x31.75mm bush washer make CarborNDon Universal |
126 | Panting burush 4” or 100mm |
127 | Bench grinder heavy duty wheelsize= 300mmx40” bore with grinder shaft make ( Bosch) |
128 | Thred tap, B.S.P, H.S.S 1/8" |
129 | Thred tap, B.S.P, H.S.S 3/16" |
130 | Thred tap, B.S.P, H.S.S 1 1/4" |
131 | Thred tap, B.S.P, H.S.S 3/8" |
132 | Thred tap, B.S.P, H.S.S 1/2" |
133 | Thred Die H.S.S , B.S.P 1/8" |
134 | Thred Die H.S.S , B.S.P 3/16" |
135 | Thred Die H.S.S , B.S.P 1/4" |
136 | Thred Die H.S.S , B.S.P 3/8" |
137 | Thred Die H.S.S , B.S.P 1/2" |
138 | Drill (make- MIRINDA, ADDISION) H.S.S Tappr Shank Drill 2.4 mm |
139 | H.S.S Tappr Shank Drill 2.9 mm |
140 | H.S.S Tappr Shank Drill 3.25 mm |
141 | H.S.S Tappr Shank Drill 4.1mm |
142 | H.S.S Tappr Shank Drill 4.6 mm |
143 | H.S.S Tappr Shank Drill 5mm |
144 | H.S.S Tappr Shank Drill 6mm |
145 | H.S.S Tappr Shank Drill 7.8mm |
146 | H.S.S Tappr Shank Drill 8.5mm |
147 | H.S.S Tappr Shank Drill 10.2mm |
148 | H.S.S Tappr Shank Drill 12mm |
149 | H.S.S Tappr Shank Drill 14mm |
150 | H.S.S Tappr Shank Drill 15.5mm |
151 | H.S.S Tappr Shank Drill 17.5mm |
152 | H.S.S Tappr Shank Drill 19.5mm |
153 | H.S.S Tappr Shank Drill 21mm |
154 | H.S.S Tappr Shank Drill 24mm |
155 | Drill socket Taper shank 1No, 2No, 3No |
156 | Roller Grooving Tool with Tool holder 35 Deg |
157 | Roll Grooving Tool withHolder 450 Digri |
158 | Roller Grooving Tool with Holder 500 Digri |
159 | MENCHEETE Grooving Tool 06mm |
160 | Carbide bit 35 Digri with Brazing Size 40x40x300mmK-20 |
161 | Carbide bit 45 Digri with Brazing Size 40x40x300mm K-20 |
162 | Carbide Bit 50Digri with Brizing Size 300x40x40 K-20 |
163 | Carbide bit 1 ½” V shape with Brizingsize 40x40x300mm |
164 | Carbide Bit 1 ½” Right Hand |
165 | Carbide Bit 1 ½” LeftHand |
166 | All Make ( MIRINDA or ADDISION) Drill 3mm Straight Shank |
167 | Drill 4.1mm Straight Shank |
168 | Drill straight Shank size 5mm |
169 | Drill straight Shank size 6.8mm |
170 | Drill straight Shank size 8mm |
171 | Drill straight Shank size 8.5mm |
172 | Drill straight Shank size 10.2 Mm |
173 | Drill straight Shank size 12mm |
174 | Drill straight Shank size 14mm |
175 | Drill straight Shank size 15.5mm |
176 | Threading Die Nut Totam make size 5mm |
177 | Threading Die Nut Totam make Size 6mm |
178 | Threading Die Nut Totam make Size 8mm |
179 | Threading Die Nut Totam make Size 10mm |
180 | Threading Die Nut Totam make Size 12mm |
181 | Threading Die Nut Totam make Size 16mm |
182 | Threading Die Nut Totam make Size 18mm |
183 | Threading Die Nut Totam make 20mm |
184 | Threading Die Nut Totam make 24mm |
185 | Allen Key 19mm |
186 | ODD leg Caliper 12” |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail