Annual Maintenance Of Machines 1 And 3
Tender Value
49.23 Lakhs
Estimated cost
Bid Submission
29 Aug 2022
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohammadpur → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Maintenance Of Machines 1 And 3
BOQ
| Sl. No. | Item Description |
| 1 | Supply Part |
| 2 | Brake Jack seal |
| 3 | RTD |
| 4 | TSD |
| 5 | GV servomotor seal |
| 6 | Runner servomotor seal |
| 7 | Rotating Union Seal |
| 8 | PVC electrical tape (red, yellow, blue & |
| 9 | EPR Self-Fusing HV Electrical Tape Roll |
| 10 | High Voltage Electrical Insulation Tapes |
| 11 | Glass cloth Tape Roll |
| 12 | 4.5\"\" Digit Single Phase Digital Program |
| 13 | 4.5\"\" Digit Digital Watt Meter within bu |
| 14 | 4.5\"\" Digit Digital VAR Meter within bui |
| 15 | 4 Digit Digital Frequency Meter |
| 16 | 4 Digit Digital PF Meter |
| 17 | Flow relay |
| 18 | Pressure Switch |
| 19 | Annual Maintenance of Unit#1 |
| 20 | Sealing of Intake gates, Dismantling of Machine including Generator Dome, Rotating Union, Servomotors,Thrust Collar, bearings, coolers,Upper Bracket etc. |
| 21 | Draining of oil of TGB, Thrust bearing, UGB & LGB and measurement of bearing gaps, cleaning of all bearing housings & pits |
| 22 | Rebabbiting of Thrust Pads |
| 23 | Rebabbiting of UGB And LGB Pads |
| 24 | Rebabbiting of TGB Shell |
| 25 | Cleaning, checking and overhauling of Guide Vane & Runner Servomotor Assembly including replacement of all seals & setting of stroke length. |
| 26 | Overhauling/repairing of levers, links and greasing work of guide vane assembly and replacement of damaged bushes. Guide Vane bedding, Repair of Turbine Guide Bearing journal. |
| 27 | Overhauling of braking and jacking system including replacement of all seals. |
| 28 | Checking and cleaning of bearing coolers and repair/replacement of coolers |
| 29 | DP Test of Turbine Top Cover, Upper Bracket and Lower Bracket |
| 30 | Providing & replacement of all Junction boxes installed at Generator barrel of machine including TB, Din rail channel, lugs, ferrules, glands etc |
| 31 | Installation, testing & commissioning of panel meters |
| 32 | Replacement of Oil and water Pipline (Damaged) |
| 33 | Modification and installation of Thrust Cooler tubes |
| 34 | Blue matching of pads & bearing gap setting & filling of oil in bearing oil bath. |
| 35 | Alignment, leveling & centering of machine. |
| 36 | Thorough cleaning of generator stator winding and accessible portion of rotor. |
| 37 | Providing & replacement of all fasteners of regulating ring, lower & upper bracket, Generator dome cover, Cooling & Oil pipelines flanges etc including tap cutting, bore matching, size in mm etc |
| 38 | Assembly of machine. |
| 39 | Painting of machine and its associated pipelines. |
| 40 | Testing & commissioning of machine including measurement of Stator form & Rotor form, PI & IR of Generator, Rotor, all auxiliaries etc. |
| 41 | Annual Maintenance of Unit#3 |
| 42 | Sealing of Intake gates, Dismantling of Machine including Generator Dome, Rotating Union, Servomotors,Thrust Collar, bearings, coolers,Upper Bracket etc. |
| 43 | Draining of oil of TGB, Thrust bearing, UGB & LGB and measurement of bearing gaps, cleaning of all bearing housings & pits |
| 44 | Rebabbiting of Thrust Pads |
| 45 | Rebabbiting of UGB And LGB Pads |
| 46 | Rebabbiting of TGB Shell |
| 47 | Cleaning, checking and overhauling of Guide Vane & Runner Servomotor Assembly including replacement of all seals & setting of stroke length. |
| 48 | Overhauling/repairing of levers, links and greasing work of guide vane assembly and replacement of damaged bushes. Guide Vane bedding, Repair of Turbine Guide Bearing journal. |
| 49 | Overhauling of braking and jacking system including replacement of all seals. |
| 50 | Checking and cleaning of bearing coolers and repair/replacement of coolers |
| 51 | DP Test of Turbine Top Cover, Upper Bracket and Lower Bracket |
| 52 | Providing & replacement of all Junction boxes installed at Generator barrel of machine including TB, Din rail channel, lugs, ferrules, glands etc |
| 53 | Installation, testing & commissioning of panel meters |
| 54 | Replacement of Oil and water Pipline (Damaged) |
| 55 | Modification and installation of Thrust Cooler tubes |
| 56 | Blue matching of pads & bearing gap setting & filling of oil in bearing oil bath. |
| 57 | Alignment, leveling & centering of machine. |
| 58 | Thorough cleaning of generator stator winding and accessible portion of rotor. |
| 59 | Providing & replacement of all fasteners of regulating ring, lower & upper bracket, Generator dome cover, Cooling & Oil pipelines flanges etc including tap cutting, bore matching, size in mm etc |
| 60 | Assembly of machine. |
| 61 | Painting of machine and its associated pipelines. |
| 62 | Testing & commissioning of machine including measurement of Stator form & Rotor form, PI & IR of Generator, Rotor, all auxiliaries etc. |
AI Tender Summary
Tender Timeline
Aug 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender