Rural Development Government Departments Closing in 0 days TDR #33441841

tender for Water Supply Scheme At.Mandruki Tq.Chakur Dist.Latur

Issued by Government Departments · chakur, Maharashtra
Tender Value
27.73 Lakhs
Estimated cost
Bid Submission
16 Aug 2022
0 days left
EMD
27736
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
chakur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

tender for Water Supply Scheme At.Mandruki Tq.Chakur Dist.Latur

BOQ

Name of Work: Water supply scheme At.Mandruki Tq.Chakur Dist.Latur
Sl. No. Item Description
1ESTIMATE FORWELLWORK Providing structural steel work in rolled sections like joists channels, angles, tees, etc. as per detailed designs and drawings including fixing in position without connecting plates, braces, etc. and one coat of anticorrosive paint and over it two coats ISMB 200 x 100
2Providing and fixing M.S. chaqquarred plate flooring of 8mm thinckness supported on M.S. angles (25 x 25 x 5 mm size) including welding, cutting and fabricating the plate to the required square or rounding shape, making holes in the plate including providing and applying 3 coats of anticorrosive paint, etc. complete as directed by engineering charge
3Providing and fixing G.I. Pipe railing having 1.0 M height consisting50 X 50 X 6 mm thick M S angles as verticals at 1.5 m c/c and additional posts at every corner with 2 rows of 25 mm dia G I pipes of medium class variety as horizontal and painting 3 coats of oil paint over one coat of anti corrosive paint of approved colour and shade, includeing labour ,transporting ,bends to curved shape .complete
4Drilling Horizontal Bore well of 115 mm diameter with all cost of machine, fuel, labour , transportations, instalation etc. complete.Horizontal bore well of 115 mm dia.
5Name of Sub work No-2Switch RoomNear percolation wellExcavation for foundation/pipe trenches in earth,soils of all types,sand, gravel and soft murum,including removing the excavated material upto adistance of 50metres and lifts as below,stacking and spreadingas directed,normal dewatering,preparing the bed for foundation and excluding back filling, etc. complete
6Excavation in general in soft material comprising of soft soil, soft murum, sand, hard murum with boulders in wet or dry condition for Head Works i.e. Intake Well, Connecting Pipe, Jack Well, Pump House, Supply Well, etc. for lift 0 to 1.5 M and lead of 150 M including barricading, gurading, disposing off surplus excavated stuff within a radius of 0.5 km. as directed by Engineer-in- charge, etc. complete excluding refilling.f) Lift 7.50 to 9.00 mtr
7Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite / quartzite / gneiss metal for incasing of PVC pipe in cement concrete road including dewatering form work, compacting and curing. finishing etc. complete .
8Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. orTor ReinforcementRCC Footings ( M-200)
9Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted )RCCCOLUMNS ( M-200)
10Providing and Casting in situ, cement concreteM-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beam and lintelsas per detailed designs and drawing or as directed including centering formork, compaction and finishing the formed surface or roughening the surface if special finish is to be provided and curing etc. complete. PLINTH BEAM M-200/SLAB BEAMM-200
11Providing and Casting in situ, cement concreteM-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete slab and landings as per detailed designs and drawing or as directed including centering formork, compaction and roughening the surface if special finish is to be provided and curing etc. complete.SLAB M-200
12Filling In plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction etc.complete.
13Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in plinth as backing with composite masonry including bailing out water manually, striking joints, raking out joints and watering complete.B.B.Masonry for super structer
14Providing and fixing steel window of various sizes as per detailed drawings fabricated from I.S. standard sections without hot dip zinc coating without/ with ventilator inclauding fabrication, glazing with non-acetinic / plain/ obscured glass panels of approved type and quality, all fixtures and fastening without teak wood boxing, and architraves and finishing with one coat of primer complete.
15Providing and fixing in position mild steel door/ window shutters including mild steel angle frame of size 50X 50X 5 mm. for fixing mild steel sheet 24 gauge including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete.DOOR & Windows
16Providing and fixingsteel frame of angle 50x50x6 mm size fordoor with16 mm dia mild steel bars horozontally at 10 cm c/c/ for ventilator positon and 15 cm, / c/c remaining portion with M.S.Flat of size 40x6 mm vartical at center including iron hold fast boxes for fixing 40x6 mm vertical at center including iron hold fast boxes for fixing shutters including weldings finishing painting etc.complete.
17Providing internal cement plaster 12mm. thick in a single coat in cement morter 1:4 without neeru finish to concrete surface in all positions inculding scffolding and curing complete.Internal cement plaster
18Providing sand faced plasterexternally in cement motar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag, curing the same fornot less than 2 days and keeping the surface of the base coat rough to recive the sand faced tretment 6 to8 mm. thick in cement mortar 1:4 finishingthe surface by taking out grains and curing for foureen days scaffolding etc. complete.sand faced plasterexternally
19Providing and fixing 22 BWG plain galvanised iron sheet on top weather shed including scaffolding fixing by means of nut and bolts or as directed by Engineer in Charge etc.complete.
20Provinding and applying two coats of water proof cement paint of approved manufacture and approved colour to the plastered surfacesincluding scaffolding if necessary, cleaning and preparingthe surface watering for two days complete.
21Item No1:- 150 mm dia Sub pump set.Providing, erecting and giving test of 7.5 HP upto 12 Stage 150 mm dia Sub pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump sheel be suitable for various delivery head and discharge with stainless steelshaft. Motor suitable for working on 415(+/-)10% volt 3 ph 50 c/s a.c. supply ,thrust corban bearing with stand entire hy .thrust. pump set shall be direct coupling with suitable strainer .pump should havesuitable discharge out late as per manufacture design .antithrust stream lined non return valve shallbe provided with pump 3mtr submersible copper conductor cable in single /double run, two pairs erection clamp 32 mm wx10mm thickshall be provided with pump. (MJP Mech. CSR page no. 2 item No pm 1-3-6 )
22Item No. 2:- 50 mm dia G.I.pipe.providing and errecting ISI mark,heavyclass,50 mm dia G.I. pipewith both end threaded &oneend B class socket.
23Item No. 3a:- M S SPECIALS providing and errecting ISI mark, B class, M S SPECIALS
24Item No. 3a:- 50 mm dia G.I.Bend. providing and errecting ISI mark, B class, 50mm dia G.I.BendwithB class socket(MJP / DSR page no 14 item no pw1-4)
25Item No. 3b:- 50 mm dia G.I.Teeproviding and errecting ISI mark, B class, 50mm dia G.I.TeewithB class socket
26Item No.4:-Earthing. providing and errecting rod type earthing (electrode of20mm dia solidG.I. Rodor G.I. Pipe of40mmdia ) 2.5 mtr burried in earth or( driven in the earth with blows of moderate force ) with necessarydoubleG.I. earth strip complete errected connected to nearest switch gear earth terminal. (PWD electrical DSR page no 166 / 9-1-4)
27Item No.5:- Flat flexible sub cableproviding and errecting flat flexible submersible cable with copper conductor 3 core , pvc insulated & pvc sheathed cable wire.size : 4 sq mm (motor to panel board). (PWD electrical DSR page no 219 / 12-4-9)
28Item No.6:- Armoured cable.providing and errectingAluminium conductor, XLPE / PVC insulated Armoured cable 3.5 or 4core cable size 16 sq mm(PWD electrical DSR page no 129 / 7-1-15)
29Item No7:-80mm dia C.I. flanges. providing and errecting ISI mark,80 mm dia C.I. flanges with nut ,bolt &washer (PWD electrical DSR page no 268 / 16-6-29)
30Item No.8:- Channel frame.providing, errecting Channel frame (Mjp/ civil/DSR P.no. 39item no.SEC-F 5)
31Item No.9:- Rain Prinventive box.providing , errecting Box type Rain Prinventive box size=1.5X1X0.30& 22SWG with lock arrangement A( panel box)=6sqmtr (PWD electrical CSR p. no. 112 / 6-1-6)
32Item No10:- plywood . providing , errectingplywood19mmthickness fixed to angle frame with necessary material( PWD electrical DSR p. no.113 / 6-1-14)
33Item No. 11:- Angle frame.providing , errecting & fabrication ofangle framefor panel support ( PWD electrical CSR p. no. 115 / 6-1-19)
34Item No. 12:- Fuse bridge.providing , errecting H C pattern porcelain fuse bridge with base and H C fuse links500 volt, 63Amp.capacity( PWD electrical DSR p. no108 / 5-10-3) )
35Item No. 13:- Triple Pole Switch. providing , errectingtriple pole iron clad /metal cladswitch& fuse 32Amp 415/500 volt. ( PWD/DSR p. no. 87 item no. 5-1-6 )
36Item No. 14:- Change overSwitch. providing , errectingChange overSwitch. clad /metal clad four pole40 Amp 415/500 volt. ( PWD/DSR p. no. 88 item no. 5-1-24)
37Item No. 15:- Volt meter. providing & errectinganalog type moving iron Voltmeterfor ACvoltage 0 to 500 volt range,50 c/s, flash type.( PWD/DSR p. no.117 item no6-3-8 )
38Item No. 16:- Ammeter. providing & errecting analog type moving iron Ammeterfor ACcurrent o to 30 Amp, directrange, 500 volt, 50 c/s flash type.( PWD/DSR p. no. 117 item no.6-3-7 )
39Item No. 17 :- Indicating Lamp. providing & errecting LED type indicating pilot lamp with LED colours RED/ Yellow / Green] 230 / 250 Volt on provided box /panel with necessary material, wring & connectons. ( PWD/DSR p. no. 120 item no.6-5-5 )
40Item No. 18:- Capacitor.providing & errectingbank of metalisedpolypropylene condensers with standard capacities of 1 , 2 , 3 , 5 , 7 , 12 , 15 , 20 & 25 kvar unit P.F. corre-ction operation on 3 ph 50 c/s500 volt + or- 10 %externally dischaging resis-tancs earthing terminals & built up angle iron or chennel iron framework&provided with terminal cover box completed& tested.(MJP Mech. CSR page no47 /cp-1)
41Item No.19:- DOL /FASD Starter.providing & errectingDOL /FASD starterto operate squirrel cage induction motor working on 380-440 volt, 3 phase,50 c/s with no volt coil and over load Relay (range 30 Amp )with nacassary material and connected to supply, etc completed. (MJP Mech. CSR page no48 / LG3-2)
42Item No.20:- Sluice Valve 80 mm dia. providing & errecting in position Sluice Valve-80mm dia and class including necessary jointing accessories (flanges, nut, bolts and rubber packing) as per the specification.(MJP /Civil DSR page no 208&214 item no SECXII-2a(iii)&4(iii)
43Item No. 21:- RefluxValve 80mm dia. providing & errecting in position RefluxValve 80 mm dia and class including necessary jointing accessories (flanges, nut, bolts and rubber packing) as per the specification.(MJP /Civil DSR page no 204&214 item no SECXII-1a(iii)&4(iii)
44Item No. 22:- MS bareels for chain pully Providing and supplying ISI standard MSspecials of required thickness with 3 coats ofapproved make epoxy paint (Shalimar, Ciba orMahindra & Mahindra make) from inside andoutside excluding all statutory duties & taxessuch as GST levied by GOI & GOM in allrespect, inspection charges, transportation tostores / site, and stacking, etc. complete.MS barrels (pipe pieces) locally manufactured(for small quantities)(MJP /Civil DSR page no 72 item no 7f)
45Item No. 23:- Chain pully block of 1 TonProviding, erecting triple spur gear type chain pulley block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift tested to 50% over load as per IS 3832 carrying ISI mark.(MJP DSR/Mech page No. 14 Sec. 5 LF 1-1)
46Total of Sub-Work No.6 Rising main ITEM No: 1 :-Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. 110 mm HDPE Pipes-Working pressure -6Kg/cm2.
47Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. Couplers 110
48Elbow 45 Deg. 110
49Elbow 90 Deg. 110
50LNPE 110
51Ferrule Tapping Tee (90x 2\")
52Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.
53Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including inspection charges, transportation upto departmental stores excluding GST levied by GOI & GOM in all respect etc. complete.Providing Rubber Gasket - EPDM Gaskets for C. I. / D.I. Pipes
54Providing double flanged Sluice Valves conforming to IS-2906 / 14846 including worm gear arrangements as per test pressure, stainless steel spindle, caps, including all taxes, transportation, etc. complete. N1 A) 100 mm dia.CIDF. Sluice Valve for score
55Providing and supplying Air Valves as per IS-14845-2000 and MJP\"s standard specifications of approved make and quality of following diameters including all taxxes (Central and Local), railway freight, inspection charges, unloding from railway wagons, loading into truck, transportation upto departmental stores / site, unloading and stacking excluding GST levied by GOI & GOM in all respects etc. complete. 40 mm dia single ball air valve
56Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preapring the bed for foundation and excluding back filling etc. complete. Lift 0 to 1.5 m.
57Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
58Excavation for foundation / pipe trenches in hard murum and Boulder W.B.M road including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
59Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm to 20 cm layers including watering and compaction etc.Murum Bedding
60Hydraulic testing of HDPE double wall corrugated pipe for non pressure underground line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original positio.110 mm dian
61Lowering, laying and jointing in position following C.I. D/F reflux valves, Butterfly valves and sluice valves including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves) A) 100 mm dia.CIDF.Sluice Valve
62Providing and fixing in position air valve shaft including providing and fixing GI mediam class of 6 mm thick MS pipe shaft 2.70 m long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including incasing of vertical shaft in PCC M-150 as shown in type desine together with providing and making flanged joints wherever required and fixing of air valve over the shaft in excluding cost of air valve and branched air valve tee etc complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines ( type design attached ) foundation on murum and harder strata.Upto 150 mm dia.
63Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavatin, B.B. masonry in C.M. 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. Note : wall thickness : 0.23 m for depth of 0.9 m and 0.35 m for balance depth exceeding 1.2 m) 60 x 45 cm size
64Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap / granite / quartzite / gneiss metal for incasing of PVC pipe in cement concrete road including dewatering form work, compacting and curing. finishing etc. complete .Cement Concretefor Encasing of PVC pipe
65Refiling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete.
66ESTIMATE FOR E.S.R. CAP - 21000 LTRS. Desining (aeshthetically) and constructing RCC elevated service reservoirs of following capacity with RCC staining consisting of columns.internal and external bracings spaced vertically not more than 4.5 metres centreto centreforESR having capacity upto 500 cum andnot more than6 m c\c for ESRs havingcapaciti above500 cum. including excavation in all types of strata ,foundationconcrete. cement plaster withwaterproofing compound to the in side fase of the container including refillingdisposing off the surpluse stuff within a lead of 50 metres, all labour and material charges includinglowering, laying,erecting, hoisting and jointingof pipe assemblyofinlet, washout overflow andbypassarrangements as per departmentaldesign, providing and fixing accessoriessuch as M.S. ladder,C.l manhole farme andcovers , water level indicators, lightenine conductor G.l pipe reiling around walk way and top slabproviding sprial stair case from ground levelM.S. grill gate of 2 Mheight with lockingarrangement of approved design .B.B. masonry. chambers providing and applying costUPTO 25,000 Liter capacity
67Providing and supplying ISI standard CI double flanged pipes including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to stores / site, unloading etc. complete as directed by Engneer-in-charge.80 mm (Inlet & Over fiow)
68100 mm(Outlet)
69Providing and supplying ISI standard CI flanged / S& S specials including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to depermental store/ site, unloading stacking etc. complete. D/F Specials Upto and including 150 mm dia.
70Providing, erecting, connecting double flanged short body pattern type manually operated butterfly valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming in BS 5155, Syntetic rubber faced ring secured on disc by retaining ring with stainless screw stub shaft of stainless steel riding in teflon bearings excluding C.C. foundation / structural steel support confirming to I S 13095-1991 ,Sluice valves -PN1.6 80 mm dia sluice valve
71100 mm dia sluice valve
72ESTIMATE FORTRIAL RUNCommissioning running and maintain the scheme to quantities rated capacity.including managing necessary personal such as operator] valveman etc as per requirements of the scheme and who should also administer chemical dose for pereiod of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body after complete of the abow period as directed by Engineer- in charge. a) For Single Village (Three months)
73A ) : Providing TCLTCL Requirement 0.0304 Mld x 4.Kg/Mld x 90 Days = 0.011M.T (MJP DSR 21-22, Sr. No. 54), P.No. 13 )
74B ) : Providing Electrical Supply At Percolation Well TCL Requirement 1 x 5.HP x 12.Hrs x90 Days = 5400 Unit

AI Tender Summary

OUR REF NO 33441841
AUTHORITY Government Departments
TENDER VALUE 27.73 Lakhs
LAST DATE 16-08-2022
Authority
Authority Name Rural Development Department
Work Description tender for Water Supply Scheme At.Mandruki Tq.Chakur Dist.Latur
Basic Detail
Tender No ZPL/RWS/JJM/ET-05/45/2022-2023
Bidding Type Tender
Location
City chakur
State Maharashtra
Key Dates
Publish Date 08 Aug 2022
Submission Date 16 Aug 2022
Open Date 17 Aug 2022
Finance
Tender Value 27.73 Lakhs
Tender Fee 1000
EMD 27736
Exemption Not Available
Document List
7187a767-0953-4f84-8d8d-c6ada32045a6.html
BOQ_1428024.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 08, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 16, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 17, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

7187a767-0953-4f84-8d8d-c6ada32045a6.html

xls

BOQ_1428024.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender