Supply And Fixing Establishment Fitting Of Open Gym And Jhoole Swing Ward No. 16 Gokuldham Park Me Mirchi Mandi Ke Pass Bachcho Ke Liye Jhula Chakri Evm Gym Sthapna Ka Karya Ward No. 16 Goku 1 Supply & fixing various item of open jym as per following det, bhilwara-Rajasthan

Supply And Fixing Establishment Fitting Of Open Gym And Jhoole Swing Ward No. 16 Gokuldham Park Me Mirchi Mandi Ke Pass Bachcho Ke Liye Jhula Chakri Evm Gym Sthapna Ka Karya Ward No. 16 Goku 1 Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement.• LEGG PRESS:- DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height).• SAFE AREA:- 2.8 x 1.4Mtr.• Leg Press equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100mm NB made from “C” Class G.I. pipe.• The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame.• The bottom support of M.S. round plate of Ø250 mm & 10mm thick.• The remaining outer frame is of 32NB made from “C” class G.I. pipe.• The foundation used for fixing is structure and made from center pipe of G.I. of 80mm . NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe . supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC . square pipe of 3mm thickness.• Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm.• The footrests are made from casted Aluminum material, having sizes 130mm X 310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate.• The frame of footrests made up of 25 NB “C” class G.I. pipe.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• To build structure bushes are used which are made from M.S. seamless pipe of 50mm O.D. and 5mm thickness.• The pins used are made up of Ø25 mm SAE 8620 bright material.• The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly.• The cerclips used for assembly are of A24 mm.• The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. 2 Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement. POMMELO HORSE • DIMENSIONS: - 2150mm (Length) x 800mm (Width) x 800mm. (Height).• SAFE AREA: - 5Mtr x 3.5Mtr. • Pommel horse equipment made from “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame of 80NB and 50NB made from “C” Class G.I. pipe.• The handle frame is of 32NB made from “C” Class G.I. pipe.• 40mm x 40mm CRC square pipes frame is placed on the 25mm x 25mm x3mm M.S. L Angle with 60 x 10m thickness flat is used for support. • Closing Caps are made up of high quality Fiber reinforced Plastic material.• High tensile steel with galvanized nuts and bolts are used for assembly. • The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to70 micron thickness. 3 Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement.CHEST CUM SEATED PULLER:-• DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height).• SAFE AREA: - 3.0Mtr x 1.7Mtr.• Chest press cum seated puller equipment made up of “C” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB made up of “C” Class G.I. pipe.• The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness.• The connecting pipes are made up from 25NB “C” class G.I. pipe.• The handle frame is made up from 32NB “C” class G.I. pipe.• To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material.• The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts & bolts are used for assembly.• The cerclips used for locking is made up of A24 & A16• The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. 4 Supply & fixing various item of open jym as per following details. Item should be fix properly including E/W & C.C. in M-20 as per requirement.CROSS TRAINER :-• DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height).• SAFE AREA: - 1.77 x 1.2Mtr. • Cross trainer equipment made from “C” Class G.I. Pipe of different NB. • The main frame Pipes are of 80NB “C” Class G.I. Pipe with single bend pipe with 250mm radius.• The bottom support of M.S. round plate of Ø250 mm & 10mm thick. • The Handle Frame is made up of 25NB “C” Class G.I. Pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “C” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. • The footrests are made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick • Closing Caps are made up of high quality Fiber reinforced Plastic material. • Pins used of Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright . • The Bearings used are of “6007zz” “6205zz” and “6203zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness. • A16 , A 24 mm circlips are used for assembly. • Bolt M8X16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. 5 Standarad See- Saw Roto Seat :-Rotation molded seats of thickness 60mm are used in these see-saw, it has been provided with bolts to fix it too see-saw frame which has a plates of 200x150x5 welded on to the frame. Handle has been provided on the frame made up of 20 NB pipe and also conforming to EN standards.Frame :- Frame of standard see - saw is designed using15 NB 20NB & 25 NB G.I. pipe and it has been given radius by suitable bending techniques. Plates has been welded at places were seat has to be installed so that seats can be fixed to the frame with suitable bolting arrangment. Standard see saw clamp is used in FRP see saw so as to provide required motion for the see saw.Tyre :- Tyre is used in FRP see saw to avoid breakage of the FRP cover while it is coming down with certain force while in use. Foundation Angle 25x25x5 Pipe 50 NB hot dip Galvanized pipe. 6 S/f of DOUBLE SWING as per following Specification-50NB hot dip galvanized swing top pipe of length 2950mm conforming to IS 1239 with GI thickness of 60 1730-1961 welded at its one ends (to be bolted over MAPS swing attachment deck pipe) -Special swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. -225mmx103mm junction box made from 3mm thick. 7 S/f of Wave Slide 2.1 m as per following Specification- Ladder Frame 25NB & 20NB Frame GI Pipe conforming to IS 1239(Part 1):1979- Hand Grip conforming to EN1176- 1:1998 (4.2.4.6)- Ladder Step - Cold formed 16 Gauge GI Plated Sheet Length 500mm & width 90mm EN1176-1:1998 (4.2.9.1) conforming to -16 SWG GI Plated Platform of size - 500x450x60mm -80NB hot dip galvanized center support pipe of length 2590mm conforming to IS 1239 with GI thickness of 60m- FRP Wave Slide Thickness 5mm* - SS Nut Bolts conforming to ASTM E-1086 : 1994-Medium H-Support25NB GI Pipe length 1490mmwith 10mm tor rod oflength300mm for support & strong foundation-Small H-Support25NB GI Pipe length 600mmwith 10mm tor rod oflength300mm for support & strong foundation 8 S/F OF FOUR SEATER MGR :- As per following Specification Rec. Age 3-8 yrs. The area 1.5m dia Safe play area 2.5m dia Ther item is having its main frame made up of 25 & 40 NB GI pipes. The stand is made in 80 NB GI pipe. The Whole structure is mounted on heavy duty bearing shaft. The bearing used is of heavy duty bearing permanentaly lubricated with water sealant. The seat frame is made in 20 NB GI pipes. The seats attached area made out of molded plastic type in rotational molding process in LLDP the seats have handrails so that the child does not fall. it accommodates 4 children at a time. 9 Supply and fixing ornamental bench make of precast reinforced concrete bench chair type with hand and back rest of approved pattern, colour & sample, manufactured by using M-30 grade of concrete & reinforced suitable with minimum 0.8% reinforced and engraving on cack rest. The bench consists of 2 Nos. L-Shape base support in Grey/Cement colour length size 80mm x 60mm of suitable of length and footing of 2 nos size 900x300x100 mm of CC 1:2:4 1 Nos (Horizontal) reinforced concrete planks of size 1500x320x50 mm & 1 Nos. (Vertical) of reinforced concrete plank of size 1500x425x50mm approved colour all parts are joined together with galvanized nuts and bolts of suitable size. All bolts area sealed after assembly. Seating length of bench 1500mm seating height of the bench 450mm total height above ground level 890 mm. Proper curve and finished and painted with desired shade with colour, numbering and uit logo complete in all respect inclusive of all taxes, loading unloading & fixing different parks/places of UIT Bhidown with certain force while in use. Foundation An 10 Supply and fixing ornamental bench make of precast reinforced concrete bench chair type with hand and back rest of approved pattern, colour & sample, manufactured by using M-30 grade of concrete & reinforced suitable with minimum 0.8% reinforced and engraving on cack rest. The bench consists of 2 Nos. L-Shape base support in Grey/Cement colour length size 80mm x 60mm of suitable of length and footing of 2 nos size 900x300x100 mm of CC 1:2:4 1 Nos (Horizontal) reinforced concrete planks of size 1500x320x50 mm & 1 Nos. (Vertical) of reinforced concrete plank of size 1500x425x50mm approved colour all parts are joined together with galvanized nuts and bolts of suitable size. All bolts area sealed after assembly. Seating length of bench 1500mm seating height of the bench 450mm total height above ground level 890 mm. Proper curve and finished and painted with desired shade with colour, complete in all respect inclusive of all taxes, loading unloading & fixing different parks/places of UIT Bhilwara area as per direction of engineer in charge.

INR 500 /-

INR 10000.0 /-

INR 5 Lakhs /-