construction Of Toilet Complex At Panjgana Masjid Dorawali W.No. 06 In Pyt. Sildhar Block Mahore Dist. Reasi Under B2v3 For The Year 2022-23
Tender Value
2.80 Lakhs
Estimated cost
Bid Submission
16 Aug 2022
0 days left
EMD
5600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
construction Of Toilet Complex At Panjgana Masjid Dorawali W.No. 06 In Pyt. Sildhar Block Mahore Dist. Reasi Under B2v3 For The Year 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil25 meter beyond 1 m from cutting edge All kinds of Soil 80% & Ordinary Rock 20% |
| 2 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approvedsteel primer. Using M.S. angles 40x40x6mm for diagonal braces |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete |
| 9 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished without a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete. 40 mm thick with 20mm nominal size stone aggregate |
| 10 | 12mm cement plasterof mix : 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: foundations, footings, bases for columnsetc. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for ; Suspended floors, roofs, landings, balconies and access platforms. |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:1 Internal work-Exposed on wall 20 mm dia. nominal bore (Light) |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:1 Internal work-Exposed on wall 15 mm dia. nominal bore (Light) |
| 16 | Providing and fixing 20 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 17 | Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore |
| 18 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not lessthan 810 gms. |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet andverflow pipes including fittings and the base support for tank |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 21 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 22 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 23 | Providing and fixing PTMT grating of approved quality and colourCircular type 100 mm nominal dia.125mm nominal dia with 25mm waste hole |
| 24 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes110 mm diametre |
| 25 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and includingwater thinnable priming coat to give an even shade |
| 26 | Add c/o sign board |
| 27 | Carriage of Cement and steel from an avg. distance of 10 K.M and 500 metre by H.L/A.T |
| 28 | Carriage of Sand & Agg from an avg. distance of 53 K.M and 500 metre by H.L/A.T |
| 29 | Carriage of Bricks from an avg. distance of 120 K.M and 500 metre by H.L/A.T |
AI Tender Summary
Tender Timeline
Aug 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 16, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender