Deep Drilling Of 125 Mm Dia Bore Holes By Using Direct Rotary Deep Drilling Of 125 Mm Dia Bore Holes By Using Direct Rotary
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Aug 2022
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
suchetgarh → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Deep Drilling Of 125 Mm Dia Bore Holes By Using Direct Rotary Deep Drilling Of 125 Mm Dia Bore Holes By Using Direct Rotary
BOQ
| Sl. No. | Item Description |
| 1 | Deep Drilling of 125 mm dia Bore Holes by using Direct Rotary/Reverse Rotary/Dual Rotary/any other suitable method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos Locations in Block Suchetgarh of District Jammu on Turnkey Basis (EPC) under Capex Budget 2022-23 (PRI Grants) |
| 2 | Drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. mtr upto 80 mtr by using Direct Rotary/Reverse Rotary/Dual Rotary/any other suitable method including installation of Mark-II hand pump and construction of platform as per UNICEF norms / as per site conditions |
| 3 | Providing of 125 mm dia. M.S. Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments. |
| 4 | Cost for slotting of MS Casing Pipe 125mm dia. (to be charged as per actual) |
| 5 | Providing of pea shaped gravel as per IS-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly. (to be charged as per actual) |
| 6 | Development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities. |
| 7 | Providing of Mark-II Hand Pump should be ISI Marked Deep Well (Plain) Hand Pumps Mark-II conforming to relevant IS Code with upto date amendments complete with accessories and along with 8 Nos, 3 mtr long Riser Pipe of 32mm nominal bore, hot dip galvanized, screwed and socketed, fitted with socket made of seamless tube or machined from solid bar. Sockets fitted at one end thread protector at the other end and with 8 Nos of connecting rods made of bright bar electro galvanized, fitted with coupler and fitted with stand assembly |
AI Tender Summary
Tender Timeline
Aug 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender