Supply And Installation Of Loose Furniture For State Council For Technical Education And Vocational Training At Unit Viii, Bhubaneswar Supply And Installation Of Loose Furniture , Providing Fitting, Fixing And Installation Of Godrej Make Nebula V3 2 Seate, Khordha-Odisha

Supply And Installation Of Loose Furniture For State Council For Technical Education And Vocational Training At Unit Viii, Bhubaneswar Supply And Installation Of Loose Furniture , Providing Fitting, Fixing And Installation Of Godrej Make Nebula V3 2 Seater Sofa Fab Grey Consisting Of Overall Size : Width:166Cm Depth : 97.5Cmheight : 93Cmseating Height : 46Cmupholstery: Material : Fabric Pvc ,Shade : Ash Grey , Thickness : 1 Mm Breaking Load (N) : Warp 1327 ,Weft 1228, Elongation At Break (%) : Warp 27.5 Weft 34.6 .Colour Fastness To Rubbing (Dry/Wet) (Scale 1- 5) : Frdarmy E= :4 Wet = 4 . Material : Combination Of Plywood And Pine Wood . Plywood Thickness : 12 Mm (Moisture Resistance And Termite Free) Pinewood Cross Section ( Without Knots) .Moisture Content : 10 -12 % Foam .Seat :Material : Slab Stock Foam , Density : Base 28 Kg/M3 And Super Soft 32 Kg/M3 At Top .Back :Material : Slab Stock Foam, Density : Super Soft Foam Of 32 Kg/M3 .Mechanism At Headrest : Hittech Make Which Can Be Adjusted At Three Levels . Webbing:Elastic Belt With Pocket Spring Of Diameter 2Mm .Legs : Ms Pipe With Metallic Powder Coated Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Nebula V3 1Seater Sofa Fab Grey Consisting Of Overall Size : Width: 101Cm Depth : 97.5Cmheight : 93Cmseating Height : 46Cmupholstery: Material : Fabric Pvc ,Shade : Ash Grey , Thickness : 1 Mm Breaking Load (N) : Warp 1327 ,Weft 1228, Elongation At Break (%) : Warp 27.5 Weft 34.6 .Colour Fastness To Rubbing (Dry/Wet) (Scale 1- 5) : Frdarmy E= :4 Wet = 4 . Material : Combination Of Plywood And Pine Wood . Plywood Thickness : 12 Mm (Moisture Resistance And Termite Free) Pinewood Cross Section ( Without Knots) .Moisture Content : 10 -12 % Foam .Seat :Material : Slab Stock Foam , Density : Base 28 Kg/M3 And Super Soft 32 Kg/M3 At Top .Back :Material : Slab Stock Foam, Density : Super Soft Foam Of 32 Kg/M3 .Mechanism At Headrest : Hittech Make Which Can Be Adjusted At Three Levels . Webbing:Elastic Belt With Pocket Spring Of Diameter 2Mm .Legs : Ms Pipe With Metallic Powder Coated Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Finesse Table - 4020 S Consisting Offinesse Table - 4020 Size Shall Be 1200 Width Mm X 600 Depth Mm X 740 Height Mm . Table Top Shall Be 25 Mm Thick Plain Particle Board (Ppb) Clad With 0.6 Mm Thick Post Formed Laminate And 1 Mm Thick Backing Laminate (Bdl) .Flat Edge Duly Sealed With 2 Mm Thick Pvc Beading.The Modesty Shall Be 18 Mm Thick Plain Particle Board ( ) Ppb Clad With 1.0 Mm Thick Decorative Laminate (Dl) On Both Sides. Edge Sealed With 2 Mm Thick Pvc Beading.Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Alice Pro Coffee Table Walnutconsisting Ofoverall Size : Width : 100Cm Depth : 65Cm Height : 45Cmtable Legs Meterials:Color :Cherry,Table Top Materials & Size : (Tempered Glass/ 10Mm),L X W X T : 1000X650x10mm Color : Clear Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Pulse - Mb Seat, Adj. Arms Larger Seats Consisting Of Seat/Back Assembly: The Seat Should Bemade Up Of 1.2 ± 0.1Cm Thk. Hot Pressed Plywoodocp-Qlta-Pl14-18.The Back Should Bemade Up Of Injection Moulded Glass Filled Nylon & Upholstered Using Net Fabric With High Tenacity Yarn.Seat Size: 47.0 Cm. (W) X 51.5 Cm. (D) Back Size :45.0 Cm. (W) X 65.3 Cm. (H)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =55+/-2 Kg/M³ And Hardness 16 ± 2 Kgffor 25% Compression. Armrests : The Armrests Have An Up-Down Adjustment Of 8.5 ± 0.5Cm Which Should Beprovided In Armrest Structure. Armrest Top Has An Integrated Layer Of Thermoplastic Elastomer (Tpe)Lumbar Support Assembly: , The Lumbar Support Consshould Be Ts Of Polypropylene Pad With Moulded Polyurethane Foam & Covered With Polyester Fabric. The Height Of Lumbar Pad Can Be Adjusted Through Two Projecting Knobs Provided On The Rear Side Of The Pad. Lumbar Pad Has An Adjustment Of 8.0 ± 0.5 Cm In Height. Front Pivot Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features. • 360° Revolving Type. • Single Point Control. • Front-Pivot For Tilt With Feet Resting On Ground Ensuring More Comfort. • Tilt Tension Adjustment. • 4-Position Locking With Anti-Shock Feature. • Seat/Back Tilting Ratio Of 1:2. Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3 Cm. Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Pitch-Center Dia Should Beø66.1 ± 0.5 Cm (76.1 ± 1.0 Cm. With Castors).Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Nylon.Seat Size: 47.0 Cm. (W) X 51.5 Cm. (D)Back Size: 45.0 Cm. (W) X 65.3 Cm. (H) Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst). , Providing Fitting, Fixing And Installation Of Godrej Make Oxbo - Vistor ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. (W) X 48.0 Cm. (D)Back Assembly: The Back Asembly. Should Bemade Of Powder Coated (Oft 40-60 Microns)Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. (W) X 60.5Cm. (H)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. Tubular Frame: The Powder Coated (Dft 40-60.Microns) Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. Overall Dimensions Of Chair Seat Height - 46.5Cm. Height - 93.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-61.0 Cm And Depth-64.5 Cm.Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Unlearn 1 Seater Cpu / Laptop Consisting Of Unlearn 1 Seater Cpu / Laptop Size Shall Be900 Width Mmx 600 Depth Mmx 680 Height Mm. Top Shall Be 25 Mm Thick , Base Material Shall Be 25 Mm Thick Pre-Laminated Particle Board Plus 2 Mm Thick Pvc Edge Banding On Straight Outer Edges . The Modesty Shall Be 18 Mm Thick Its Base Material Shall Be 16 Mm Plain Particle Board Plus Post - Laminated With 0.6 Mm Top Laminate On Either Side2 Mm Thick And 0.8 Mm Thick Pvc Edge Banding Of Matching Colour On Outer Edges Of Modesty . Legs Shall Be Made From 1.6 Mm Matt Silver Anodized Aluminiumn Extrusion . Legs Assembeled Together With 8 Mm Thick Ms Powder Coated Plate At Top . The Base Support Plate Is Having Provision For Wire Entry And Glide Fixing. The Wire Carrying Is Facilitated Through The Hollow Space Between Two Leg Extrusions And The Wires Are Concealed Between Removable Rigid Pvc Extrusion In The Leg . Max . 20 Nos. Of Dia 6 Wires Can Be Passed Through The Space Between Two Leg Extrusions . Table Support Brackets Shall Be Powder Coated Table Support Brackets Made From 2 Mm Thick Ms Sheet Provided For Overall Product Stability . Stopper Shall Be Powder Coated Made From 1.5 Mm Thick Aluminium Extrusion Fixed With Work - Surface By Powder Coated Stopper Bracket Made From 3 Mm Thick Ms Sheet . Both Ends Of Aluminium Extrusion Covered With Plastic Moulded End Cap . The Grommet Shall Be Made From Plastic Moulded Components To Facilitate Access Electrical / Data / Voice Sockets Access From Top . The Switch Mounting Tray Shall Be Powder Coated Made From 0.8 Mm And 2 Mm Thick Ms Sheet Fitted With Modesty Through Which Cables Can Be Passed . Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Unlearn 2 Seater Laptop Consisting Of Unlearn 2 Seater Laptop Size Shall Be1350 Width Mmx 600 Depth Mmx 680 Height Mm.Top Shall Be 25 Mm Thick , Base Material Shall Be 25 Mm Thick Pre-Laminated Particle Board Plus 2 Mm Thick Pvc Edge Banding On Straight Outer Edges . The Modesty Shall Be 18 Mm Thick Its Base Material Shall Be 16 Mm Plain Particle Board Plus Post - Laminated With 0.6 Mm Top Laminate On Either Side2 Mm Thick And 0.8 Mm Thick Pvc Edge Banding Of Matching Colour On Outer Edges Of Modesty . Legs Shall Be Made From 1.6 Mm Matt Silver Anodized Aluminiumn Extrusion . Legs Assembeled Together With 8 Mm Thick Ms Powder Coated Plate At Top . The Base Support Plate Is Having Provision For Wire Entry And Glide Fixing. The Wire Carrying Is Facilitated Through The Hollow Space Between Two Leg Extrusions And The Wires Are Concealed Between Removable Rigid Pvc Extrusion In The Leg . Max . 20 Nos. Of Dia 6 Wires Can Be Passed Through The Space Between Two Leg Extrusions . Table Support Brackets Shall Be Powder Coated Table Support Brackets Made From 2 Mm Thick Ms Sheet Provided For Overall Product Stability . Stopper Shall Be Powder Coated Made From 1.5 Mm Thick Aluminium Extrusion Fixed With Work - Surface By Powder Coated Stopper Bracket Made From 3 Mm Thick Ms Sheet . Both Ends Of Aluminium Extrusion Covered With Plastic Moulded End Cap . The Grommet Shall Be Made From Plastic Moulded Components To Facilitate Access Electrical / Data / Voice Sockets Access From Top . The Switch Mounting Tray Shall Be Powder Coated Made From 0.8 Mm And 2 Mm Thick Ms Sheet Fitted With Modesty Through Which Cables Can Be Passed . Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Premier - Visitor Without Armss Consisting Of Seat/Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. Back Size 49.0 Cm. (W) X 47.0 Cm. (H)Seat Size 49.0 Cm. (W) X 44.0 Cm.(D) High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 ±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Tubular Frame: The Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). Overall Dimensions Of Chair Seat Height - 43.0Cm.Height - 80.0Cm.Width & Depth Of Chair As Measured From Pedestal - Width-52.5 Cm And Depth-61.0 Cm. Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Premier- Visitor With Arms Consisting Of Seat/Back Assembly: The Seat And Back Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot Pressed Plywood And Upholstered With Fabric And Moulded Polyurethane Foam With Pvc Lipping All Around. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. Back Size 49.0 Cm. (W) X 47.0 Cm. (H)Seat Size 49.0 Cm. (W) X 44.0 Cm.(D)High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 ±2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrests: The Armrest Tops Should Beinjection Moulded From Black Polypropylene. They Should Befitted To Tubular Armrest Supports Made Of Ø2.54 ±0.03Cm. X 0.16 ±0.0128Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). The Tubular Armrest Supports Hold Together The Seat And Back. Tubular Frame: The Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns ). Overall Dimensions Of Chair-Seat Height - 43.0 Height - 80.0Cm. Width & Depth Of Chair As Measured From Pedestal - Width-55 Cm And Depth-61.0 Cm. Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Grande Pro Dining Table 4Str Wood Consisting Of Overall Size : Length : 117Cmwidth : 75Cm Height : 2.6Cmmetal Materials : (Gauge +/- 0.1Mm):Material:Bolt & Washer,Wooden Materials :Material:Sheesham Solid Wood , Color:Metal Part Color:Black Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Grande Dark Walnut Diningchair Consisting Of Overall Size :Dining Chair :Length : 45Cmwidth : 45Cmheight : 95Cm Cushion Seat :Length : 45Cm Width : 45Cm Height : 50Cm Metal Materials : (Gauge +/- 0.1Mm):Material:Nut & Washer Wooden Materials :Material:Sheesham Solid Wood Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Relish Table With Ss Top 1200W Consisting Ofrelish Table With Ss Top 1200 Wsize Shall Be1180 Width Mmx 750 Depth Mmx 750 Height Mm.The Top Shall Be In Stainless Steel Brushed Finish With Plb Insert For Durability . Easy To Clean And Maintain Hygiene . The Understructure Shall Have Side Frames Shall Be Made From 30 Mm X 30 Mm X 1.5 Mm Thick Ms Powder Coated Tubes At Base Which Are Welded And Are Fixed To Top With Screws . The Bottom Ends Are Closed With Plastic Bottles .Ms Shade : S/G Metallic Darkgrey . The Cross Member Shall Be Made From 30 Mm X 30 Mm X 1.5 Mm Thick Ms Powder Coated Tube , Which Is Welded And Bolted To Side Frames . Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Parto Plus 3 Seater Sofa Slthr Black Consisting Of Overall Size :Width: 175Cmdepth : 87Cmheight : 76Cmseating Height : 39.5Cmstitching: Thread : Poly Proplin. Leather/Pvc/Fabric: Pvc. Thickness (Mm) : 0.9 Weight (Gsm) : 575Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Parto Plus 1Seaster Sofa Slthr Black Consisting Of Overall Size :Width: 92Cmdepth : 87Cmheight : 76Cmseating Height : 39.5Cmstitching: Thread : Poly Proplin. Leather/Pvc/Fabric: Pvc. Thickness (Mm) : 0.9 Weight (Gsm) : 575Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , Providing Fitting, Fixing And Installation Of Godrej Make Mars Slider High Back Without Desklet With Wooden Armtop Azure Blue Main Chairconsisting Of Seat Assembly: The Seat Assembly Is Made Of Polyurethane Foam Moulded With M.S. Tubular Frame Insert Which Is Upholstered With Fabric. The Insert Is Tubular Frame Made Of 01.9 ±0.02Cm X 0.16 ±0.013Cm Thk Ms. E.R.W Round Tube With Flexible Support Straps Running Across The Length And Width Of The Frame.The Seat Has An Auto-Tipup Feature Making It Stay In Upright Position When Not In Use Enabling Clear Row Passage. * Approx. Seat Size : 45.5Cm (W) X 46.5Cm (D). Backrest Assembly: The Back Assembly Has A Flexi Back Mechanism. It Is Made Of Polyurethane Foam Moulded With M.S. Tubular Frame Insert, Upholstered With Fabric And Has A Plastic Back Cover. The Insert Is A Tubular Frame Made Of 01.9 ±0.02Cm X 0.16 ±0.013Cm Thk M.S.E.R.Vv Round Tube With Flexible Support Straps Running Across The Length And Width Of The Frame. *Approx. Back Size : High Back- 45.5Cm (W) X 82.4Cm (H). High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Is Moulded With Density = 45 +/-3 Kg/M3. Synchro Slide Mechanism : The Synchro Slide Mechanism Is Designed Using Heavy Duty Slides Aiding In Relaxed Posture. The Slider Is Connected To Abck Using Linkages To Achieve Synchronous Motion Between Seat & Back.The Synchro Silde Has An Stroke Of 60+-5Mm And Is Mounted On The Side Panel , Side Panel / Aisle Panel:The Chair Rests On The Ground On Two Side Panel Frames Fabricated From 0.12 ±0.020Cm Thk Cr Steel Sheet Which Is Cladded With Fabric Upholstery. The Side Panel Frame Is Grouted To The Floor Using 2 Nos. Of Anchors For Each Panel Through 0.3 ± 0.05Cm Thk Hr Steel Base Plate.Wooden Armrest (For Marshb/Mb069xdwt With Desklet) : The Armrest Is Made Up Of Solid Beech Wood With Clear Lacquer Coat.The Armrest Is Fitted With Sidepanel Through Concealed Zinc Plated Hinge.Retractable Desklet: The Desklet Is Made Of 1.8 ±0.05Cm Thk. Pre-Laminated Particleboard With In-Situ Injection Moulded Polypropylene Edging All Around. Desklet Top Ismounted On High Pressure Die-Cast Aluminium Arm Through Metal Bracket 0.2 ± 0.05Cm Thk. H.R.Steel.The Assembly Is Mounted On Sidepanel Through Desklet Arm Connector Made Up Of Glass Filled Nylon (Pa6+30°/0Gf).*Desklet Outer Dimension: 27±0.1Cm. (W) X 32.0±0.1Cm. (D) Powder Coating: Steel Components Are Epoxy Polyester Powder Coated (Dft 40-60 Microns).Flooring Pre - Requisite : The Auditorium Chair Is Designed To Get Mounted/Grouted On Floors With Flooring Specification As Mentioned In Flooring Pre-Requisite Godrej Doc-No: Stg 129368. Complete As Per Approved Drawing And Specification Includingcost Of All Materials. Labour And Transportation As Per Direction Of Engineer In Charge (Excluding Gst) , N.B - The Bidders Are Required To Quote Their Rates Excluding Of Goods & Service Tax (Gst). Gst As Applicable Will Be Paid Extra. The Existing Rule Of Govt. And Any Amendment Made In Future Will Be Followed.

INR 11800 /-

Refer document

Refer document

Name of Work:Supply & installation of loose furniture for State Council for Technical Education and Vocational Training (SCTE&VT) at Unit – VIII, Bhubaneswar

Sl. No.	Item Description
1	Providing fitting, fixing and installation of Godrej Make Nebula V3 2 seater Sofa fab Grey Consisting of Overall Size : Width:166cm Depth : 97.5cmHeight : 93cmSeating Height : 46cmUpholstery: Material : Fabric PVC ,Shade : Ash Grey , Thickness : 1 mm Breaking Load (N) : Warp 1327 ,Weft 1228, Elongation at break (%) : Warp 27.5 Weft 34.6 .Colour Fastness to Rubbing (Dry/Wet) (scale 1- 5) : FrDarmy e= :4 Wet = 4 . Material : Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 % Foam .Seat :Material : Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
2	Providing fitting, fixing and installation of Godrej Make Nebula V3 1seater Sofa fab Grey Consisting of Overall Size : Width: 101cm Depth : 97.5cmHeight : 93cmSeating Height : 46cmUpholstery: Material : Fabric PVC ,Shade : Ash Grey , Thickness : 1 mm Breaking Load (N) : Warp 1327 ,Weft 1228, Elongation at break (%) : Warp 27.5 Weft 34.6 .Colour Fastness to Rubbing (Dry/Wet) (scale 1- 5) : FrDarmy e= :4 Wet = 4 . Material : Combination of plywood and pine Wood . Plywood thickness : 12 mm (moisture resistance and termite free) Pinewood cross section ( without knots) .Moisture content : 10 -12 % Foam .Seat :Material : Slab stock foam , Density : Base 28 kg/m3 and super soft 32 kg/m3 at top .Back :Material : Slab stock foam, Density : Super soft foam of 32 kg/m3 .Mechanism at Headrest : Hittech make which can be adjusted at three levels . Webbing:Elastic belt with pocket spring of diameter 2mm .Legs : MS pipe with metallic powder coated complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
3	Providing fitting, fixing and installation of Godrej Make Finesse Table - 4020 s Consisting ofFinesse Table - 4020 size shall be 1200 Width mm x 600 Depth mm x 740 Height mm . Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
4	Providing fitting, fixing and installation of Godrej Make Alice Pro Coffee table WalnutConsisting ofOverall Size : Width : 100cm Depth : 65cm Height : 45cmTABLE LEGS METERIALS:Color :cherry,TABLE TOP MATERIALS & SIZE : (tempered Glass/ 10mm),L X W X T : 1000x650x10mm Color : clear complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
5	Providing fitting, fixing and installation of Godrej Make PULSE - Mb Seat, Adj. Arms Larger Seats Consisting of seat/back assembly: the seat should bemade up of 1.2 ± 0.1cm thk. hot pressed plywoodocp-qlta-pl14-18.the back should bemade up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgffor 25% compression. armrests : the armrests have an up-down adjustment of 8.5 ± 0.5cm which should beprovided in armrest structure. armrest top has an integrated layer of thermoplastic elastomer (tpe)lumbar support assembly:
6	the lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. front pivot synchro mechanism: the adjustable tilting mechanism should bedesigned with the following features. • 360° revolving type. • single point control. • front-pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment. • 4-position locking with anti-shock feature. • seat/back tilting ratio of 1:2. pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm. pedestal assembly: the pedestal should beinjection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch-center dia should beØ66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).twin wheel castors:the twin wheel castors should beinjection moulded in black nylon.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D)BACK SIZE: 45.0 cm. (W) x 65.3 cm. (H) complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST).
7	Providing fitting, fixing and installation of Godrej Make OXBO - Vistor ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. seat size: 47.0 cm. (w) x 48.0 cm. (d)back assembly: the back asembly. should bemade of powder coated (oft 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back should beupholstered using double layer spacer mesh fabric with high tenacity yarn. back size : 46.5 cm. (w) x 60.5cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression.armrests: the one-piece armrests should beinjection moulded from black co-polymer polypropylene. tubular frame: the powder coated (dft 40-60.microns) tubular frame should becantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm thick m.s.e.r.w. tube. Overall Dimensions of Chair Seat Height - 46.5cm. Height - 93.5cm. Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm.complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
8	Providing fitting, fixing and installation of Godrej Make Unlearn 1 Seater CPU / Laptop Consisting of Unlearn 1 Seater CPU / Laptop size shall be900 Width mmx 600 Depth mmx 680 Height mm. Top shall be 25 mm thick , Base material shall be 25 mm thick pre-laminated particle board plus 2 mm thick PVC edge banding on straight outer edges . The Modesty shall be 18 mm thick its base material shall be 16 mm Plain particle board plus post - laminated with 0.6 mm top laminate on either side2 mm thick and 0.8 mm thick PVC edge banding of matching colour on outer edges of modesty . Legs shall be made from 1.6 mm Matt silver anodized aluminiumn extrusion . Legs assembeled together with 8 mm thick MS Powder coated plate at top . The base support plate is having provision for wire entry and glide fixing. The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . Max . 20 nos. of Dia 6 wires can be passed through the space between two leg extrusions . Table Support brackets shall be powder coated table support brackets made from 2 mm thick MS sheet provided for overall product stability . Stopper shall be powder coated made from 1.5 mm thick aluminium extrusion fixed with work - surface by powder coated stopper bracket made from 3 mm thick MS sheet . Both ends of Aluminium extrusion covered with plastic moulded end cap . The Grommet shall be made from plastic moulded components to facilitate access electrical / data / voice sockets access from top . The Switch Mounting tray shall be powder coated made from 0.8 mm and 2 mm thick MS sheet fitted with modesty through which cables can be passed . complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
9	Providing fitting, fixing and installation of Godrej Make Unlearn 2 Seater Laptop Consisting of Unlearn 2 Seater Laptop size shall be1350 Width mmx 600 Depth mmx 680 Height mm.Top shall be 25 mm thick , Base material shall be 25 mm thick pre-laminated particle board plus 2 mm thick PVC edge banding on straight outer edges . The Modesty shall be 18 mm thick its base material shall be 16 mm Plain particle board plus post - laminated with 0.6 mm top laminate on either side2 mm thick and 0.8 mm thick PVC edge banding of matching colour on outer edges of modesty . Legs shall be made from 1.6 mm Matt silver anodized aluminiumn extrusion . Legs assembeled together with 8 mm thick MS Powder coated plate at top . The base support plate is having provision for wire entry and glide fixing. The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . Max . 20 nos. of Dia 6 wires can be passed through the space between two leg extrusions . Table Support brackets shall be powder coated table support brackets made from 2 mm thick MS sheet provided for overall product stability . Stopper shall be powder coated made from 1.5 mm thick aluminium extrusion fixed with work - surface by powder coated stopper bracket made from 3 mm thick MS sheet . Both ends of Aluminium extrusion covered with plastic moulded end cap . The Grommet shall be made from plastic moulded components to facilitate access electrical / data / voice sockets access from top . The Switch Mounting tray shall be powder coated made from 0.8 mm and 2 mm thick MS sheet fitted with modesty through which cables can be passed . complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
10	Providing fitting, fixing and installation of Godrej Make Premier - Visitor Without Armss Consisting of seat/back assembly: the seat and back should bemade up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam should bedesigned with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h)seat size 49.0 cm. (w) x 44.0 cm.(d) high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. tubular frame: the tubular frame should becantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ). Overall Dimensions of Chair Seat Height - 43.0cm.Height - 80.0cm.Width & Depth of Chair as measured from pedestal - Width-52.5 cm and Depth-61.0 cm. complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
11	Providing fitting, fixing and installation of Godrej Make Premier- Visitor With Arms Consisting of seat/back assembly: the seat and back should bemade up of 1.2 ±0.1cm. thick hot pressed plywood and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam should bedesigned with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h)seat size 49.0 cm. (w) x 44.0 cm.(d)high resilience (hr) polyurethane foam: the hr polyurethane foam should bemoulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgffor 25% compression. armrests: the armrest tops should beinjection moulded from black polypropylene. they should befitted to tubular armrest supports made of ø2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ). the tubular armrest supports hold together the seat and back. tubular frame: the tubular frame should becantilever type & made of ø2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and black powder coated ( dft 40-60 microns ). Overall Dimensions of Chair-Seat Height - 43.0 Height - 80.0cm. Width & Depth of Chair as measured from pedestal - Width-55 cm and Depth-61.0 cm. complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
12	Providing fitting, fixing and installation of Godrej Make Grande Pro Dining Table 4Str Wood Consisting of Overall Size : Length : 117cmWidth : 75cm Height : 2.6cmMETAL MATERIALS : (gauge +/- 0.1mm):Material:BOLT & WASHER,WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD , COLOR:Metal part Color:Black complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
13	Providing fitting, fixing and installation of Godrej Make Grande Dark Walnut DiningChair Consisting of Overall Size :Dining Chair :Length : 45cmWidth : 45cmHeight : 95cm Cushion Seat :Length : 45cm Width : 45cm Height : 50cm METAL MATERIALS : (gauge +/- 0.1mm):Material:NUT & WASHER WOODEN MATERIALS :Material:SHEESHAM SOLID WOOD complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
14	Providing fitting, fixing and installation of Godrej Make Relish Table with SS top 1200W Consisting ofRelish Table With SS Top 1200 Wsize shall be1180 Width mmx 750 Depth mmx 750 Height mm.The top shall be in Stainless Steel brushed finish with PLB insert for Durability . Easy to clean and maintain hygiene . The Understructure shall have side frames shall be made from 30 mm x 30 mm x 1.5 mm thick MS Powder Coated tubes at base which are welded and are fixed to top with screws . The bottom ends are closed with plastic bottles .MS Shade : S/G Metallic DarkGrey . The Cross Member shall be made from 30 mm x 30 mm x 1.5 mm thick MS powder coated tube , which is welded and bolted to side frames . complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
15	Providing fitting, fixing and installation of Godrej Make Parto PLUS 3 Seater Sofa Slthr black Consisting of Overall Size :Width: 175cmDepth : 87cmHeight : 76cmSeating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
16	Providing fitting, fixing and installation of Godrej Make Parto PLUS 1Seaster Sofa Slthr black Consisting of Overall Size :Width: 92cmDepth : 87cmHeight : 76cmSeating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
17	Providing fitting, fixing and installation of Godrej Make MARS Slider High Back Without Desklet with Wooden Armtop Azure Blue Main ChairConsisting of SEAT ASSEMBLY: The seat assembly is made of polyurethane foam moulded with M.S. tubular frame insert which is upholstered with fabric. The insert is tubular frame made of 01.9 ±0.02cm x 0.16 ±0.013cm thk MS. E.R.W round tube with flexible support straps running across the length and width of the frame.The Seat has an auto-tipup feature making it stay in upright position when not in use enabling clear row passage. * Approx. Seat Size : 45.5cm (W) x 46.5cm (D). BACKREST ASSEMBLY: The back assembly has a flexi back mechanism. It is made of polyurethane foam moulded with M.S. tubular frame insert, upholstered with fabric and has a plastic back cover. The insert is a tubular frame made of 01.9 ±0.02cm x 0.16 ±0.013cm thk M.S.E.R.VV round tube with flexible support straps running across the length and width of the frame. *Approx. Back Size : High Back- 45.5cm (W) x 82.4cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45 +/-3 kg/m3. Synchro Slide Mechanism : The Synchro Slide Mechanism is Designed Using Heavy Duty Slides Aiding in relaxed Posture. The Slider is connected to ABck Using linkages to achieve synchronous motion between seat & back.the Synchro silde has an Stroke of 60+-5mm and is mounted on the side panel
18	SIDE PANEL / AISLE PANEL:The chair rests on the ground on two side panel frames fabricated from 0.12 ±0.020cm thk CR steel sheet which is cladded with fabric upholstery. The side panel frame is grouted to the floor using 2 nos. of anchors for each panel through 0.3 ± 0.05cm thk HR steel base plate.WOODEN ARMREST (FOR MARSHB/MB069XDWT WITH DESKLET) : The armrest is made up of solid beech wood with clear lacquer coat.The armrest is fitted with sidepanel through concealed zinc plated hinge.RETRACTABLE DESKLET: The desklet is made of 1.8 ±0.05cm thk. pre-laminated particleboard with in-situ injection moulded PolyPropylene edging all around. Desklet Top ismounted on High pressure die-cast aluminium arm through metal bracket 0.2 ± 0.05cm thk. H.R.STEEL.The assembly is mounted on sidepanel through Desklet arm connector made up of Glass filled nylon (PA6+30°/0GF).*Desklet Outer Dimension: 27±0.1cm. (W) X 32.0±0.1cm. (D) POWDER COATING: Steel components are epoxy polyester powder coated (DFT 40-60 microns).FLOORING PRE - REQUISITE : The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368. complete as per approved drawing and specification includingcost of all materials. labour and transportation as per direction of Engineer in charge (Excluding GST)
19	N.B - The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed.